Vaxcel Sodo T0672 Handleiding

Bekijk gratis de handleiding van Vaxcel Sodo T0672 (4 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over Vaxcel Sodo T0672 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Page 1 / 4

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2.READ AND SAVE THESE INSTRUCTIONS.

T0672

Important to Know:

1. This fixture requires a 120 VAC, 60 Hz power source.

2. For general safety and to avoid any possible damage to the sensor, be sure the power is switched "off "

before adjustment.

3. Motion sensor: turns light ON automatically when motion is detected and turns light OFF automatically

when motion stops.

4. Photocell keeps the light OFF during daylight hours.

5. When in manual override mode, use wall switch to keep the light ON during the night.

Hardware Package (included):

Anchor (B)

Drywall Screw (A)

Decorative Cover (C)

Wall Mounted

Read notes section on page 4-5 for additional

information about mounting location of fixture.

Light fixture and sensor should be mounted as

shown when installed.

Fig.1

Note: Fixture can be wall mounted only.

Maximum Wattage: 13W

Work Temperature: - 4°F~113°F

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

220815

Product specificaties