Vaxcel Abbotsford C0375 Handleiding
Pagina's 3 Verlichting
Bekijk de handleiding van Vaxcel Abbotsford C0375 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
C0375 / P0475 / C0376 / P0476
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Hardware Package (included)
for Semi-Flush Mount:
Hardware Package (included)
for Pendant:
Turn off the power at fuse or circuit box
Installation Steps for Semi-Flush Mount:
1. Unscrew the two set screws (D) and separate the mounting strap unit (A) from the canopy.
2. Attach the mounting strap unit (A) to the outlet box by using two mounting screws (B).
3. Lock one end of the tube to the threaded pipe of the shade, and lock the other end of the tube to canopy,
washer (F) and hex nut (E) using a wrench (not included).
4. Install 2 x 60W max. medium base bulbs (not included).
See relamping label at socket area or packaging for maximum wattage allowed.
5. Slip the glass panel and rubber pad (G) up through the threaded pipe of the small tube, then secure them with
the finial (H).
NOTE: The glass panel should be flatly laid flat on the three brackets.
Hex Nut (E)
Washer (F)
Rubber Pad (G)Finial (H)
Quick Link (J)Loop (I)
Chain (K)
260421
Wire Connector (C)
Mounting Screw (B)
Set Screw (D)
Page 1 / 3
Outlet Box
House Ground Wire
Wire Connector (C)
Fixture Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Wrench (not included)
Hex Nut (E)
Washer (F)
Set Screw (D)
Canopy
Tube
Threaded Pipe
Threaded Pipe
Threaded Pipe
Class Panel
Bracket
Rubber Pad (G)
Small Tube
Finial (H)
Mounting Strap Unit (A)
Shade
Max. 60W Medium
Base bulb
(not included)

Turn off the power at fuse or circuit box
Turn off the power at fuse or circuit box
Turn on the power at fuse or circuit box
Installation Steps for Pendant:
1. Unscrew the two set screws (D) and separate the
mounting strap unit (A) from the fixture.
2. Attach the mounting strap unit (A) to the outlet box by using
two mounting screws (B).
3. Lock one end of the tube to the threaded pipe of the shade, and
lock the other end of the tube to bottom loop.
4. Pass loop (I) through the canopy, washer (F) and hex nut (E), then
tighten using a wrench (not included).
5. Choose the length of the chain (K) you need, then weave the fixture wire
and the fixture ground wire through the chain (K), loop (I) and canopy.
6. Connect the chain (K) to the canopy and bottom loop with two quick links (J).
7. Install 2 x 60W max. medium base bulbs (not included).
See relamping label at socket area or packaging for maximum
wattage allowed.
8. Slip the glass panel and rubber pad (G) up through the threaded pipe
of the small tube, then secure them with the finial (H).
NOTE: The glass panel should be flatly laid flat on the three
brackets.
9. Pull out the source wires from the outlet box. Make wire
connections using wire connectors (C) as follows:
---Connect the smooth-coated wire (marked) from
the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from
the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting strap
unit (A) with the green ground screw, then connect it
to the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap unit (A), and then
secure it with two set screws (D).
260421
Outlet Box
House Ground Wire
Wire Connector (C)
Fixture Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Set Screw (D)
Canopy
Loop (I)
Quick Link (J)
Quick Link (J)
Bottom Loop
Chain (K)
Tube
Threaded Pipe
Threaded Pipe
Bracket
Shade
Max. 60W Medium
Base bulb
(not included)
Threaded Pipe
Class Panel
Rubber Pad (G)
Small Tube
Finial (H)
6. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
--- Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
--- Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
--- Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to the
house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
Excess wires should be cut by the customer.
7. Attach the canopy to the mounting strap unit (A), and then secure it with
two set screws (D).
Page 2 / 3
Wrench (not included)
Hex Nut (E)
Washer (F)

1 Year Warranty
How can warranty service be obtained?
1-800-482-9235
Vaxcel warrants all of our products against defects in workmanship and finishes for one year following the date of
shipment.
Exclusions: This warranty does not include the failure of products from extreme acts of nature; environmental conditions
not suited for the products intended use; operation in temperatures outside of the range specified in the instruction
manual; usage with improper power supply, power surges or dips. For coastal locations, some corrosion is considered
normal for the environment.
Vaxcel reserves the right to repair, replace or issue a credit for any properly installed product, provided it is returned per
RMA instruction. This warranty is limited to the cost of the product only and does not extend to transportation, installation
or replacement costs.
A
B
D
C
260421
Hex Nut (E)
Washer (F)
Rubber Pad (G)Finial (H)
Quick Link (J)
Loop (I)
Chain (K)
A: 9-3/4"
B: 16"
C: 9"
D: 16"
The following parts are available for reorder if damaged or missing.
Spare Parts List:
Mounting Hardware
7219MM (1SET) for C0375 / P0475
7222MM (1SET) for P0376 / P0476
Glass Panel
7218PP
Mounting Hardware
7221MM (1SET) for C0375 / P0475
7224MM (1SET) for C0376 / P0476
Wire Connector (C)
Mounting Screw (B)
Set Screw (D)
Mounting plate Unit (A)
Page 3 / 3
Product specificaties
| Merk: | Vaxcel |
| Categorie: | Verlichting |
| Model: | Abbotsford C0375 |
Heb je hulp nodig?
Als je hulp nodig hebt met Vaxcel Abbotsford C0375 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden