Eltako FT55R Handleiding
Eltako
Niet gecategoriseerd
FT55R
Bekijk gratis de handleiding van Eltako FT55R (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 4.6 sterren uit 27.5 reviews. Heb je een vraag over Eltako FT55R of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
GB
Wireless pushbutton internal frame
dimensions 55x55mm with radius, 15mm
high. Generates the power for wireless
telegrams itself when the button is pressed,
therefore there is no connecting wire and no
standby loss.
For Busch Reflex and Duro cover frames.
The scope of supply comprises a rocker,
a double rocker, a mounting base (all
same colour), the wireless module and
one adhesive foil.
Wireless pushbuttons with one rocker can
transmit two evaluable signals: press rocker
up and press rocker down. Wireless
pushbuttons with double rocker can transmit
four evaluable signals: press two rockers up
or down.
The mounting base can be screwed onto a
flat surface or glued to the wall, on glass or
on furniture using the enclosed adhesive foil.
Use the sleeves in the 55 mm socket box
forscrew mounting. Then the wireless push-
button lighting FTB can be snapped into the
mounting plate from the rear.
The double rocker is snapped onto the
wireless module at the factory. If the double
rocker is replaced by the large rocker, remove
the rocker halves by pulling off to the front.
Do not bend towards the middle. Then snap
the large rocker so that the markings 0 and I
on the back line up with the same markings
on the wireless module.
Adhesion: First adhere the set comprising
the mounting base, frame and attachment
frame - with the latches pointing at the top
and bottom. Then snap on the set comprising
the wireless module and rocker - with the
marking 0 on the back always pointing up.
30 000 225 - 1
Wireless sensor
Pushbutton FT55R-
Teaching-in wireless sensors in wireless
actuators
All sensors must be taught-in into the
actuators so that they can detect and
execute commands.
The teach-in process is described in the
operating instruction of the actuators.
08/ 2012 Subject to change without notice.
Before screwing, remove the mounting base
from the frame and the attachment frame. To
do this, press the latches on the mounting
base outwards. Then screw the mounting
base - with the latches at top and bottom -,
snap on the frame with the attachment frame
and snap on the set comprising the wireless
module and rocker - with the marking 0 on
the back always pointing to the top.
We recommend sheet metal countersunk
screws 2.9x25mm, DIN 7982 C, for
screw connections. Both with rawl plugs
5x25mm and with 55mm switch boxes.
Product specificaties
| Merk: | Eltako |
| Categorie: | Niet gecategoriseerd |
| Model: | FT55R |
Heb je hulp nodig?
Als je hulp nodig hebt met Eltako FT55R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Eltako
14 April 2025
14 April 2025
13 Maart 2024
21 Februari 2024
21 Februari 2024
21 Februari 2024
21 Februari 2024
20 Februari 2024
20 Februari 2024
20 Februari 2024
Handleiding Niet gecategoriseerd
- Positive Grid
- Phase Technology
- Antelope
- Code Corporation
- Metapace
- Iomega
- Mikavi
- Tubus
- Lively
- Atoll
- Favini
- BBB
- Eve Audio
- Adam Hall
- Dubatti
Nieuwste handleidingen voor Niet gecategoriseerd
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025