Eltako FKS-SV Handleiding
Eltako
Niet gecategoriseerd
FKS-SV
Bekijk gratis de handleiding van Eltako FKS-SV (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Eltako FKS-SV of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
Wireless small actuator Smart Valve for
radiators. Without battery and wire. With
thermic Energy Harvesting. Smart Home
sensor.
Bidirectionale wireless with EnOcean protocol
EEP A5-20-01.
Function
The actuator obtains its power supply from
the temperature difference (ΔT>4K) between
the radiator and the room.
The internal storage device prevents power
supply bottlenecks needed to run the actuator.
Applications
The actuator is designed both for use in private
homes and in industrial premises. In rooms
that are seldom heated, it may be necessary
to recharge the device via the micro-USB.
Note:
This small actuator must be operated with
an additional room temperature sensor/
controller, either via a Professional Smart
Home Controller or a FUTH.
Installation
The actuator can be tted directly to valves
with a thread of M30 x 1.5. Metal adapters
which are available on the web or in specialist
shops can be used to t them to valves with
different mounting options.
As-delivered state
When delivered the pin is fully retracted. If
the pin is not retracted, insert a thin stylus
into the pushbutton opening and press the
pushbutton for 3 to 6 seconds.
Small actuator
FKS-SV
GB
Temperature at mounting location:
0°C up to +40°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
30 000 413 - 1
Installation and start
1. Remove the existing control valve from
the radiator.
2. Fit the actuator.
3. Set the wireless thermo clock/hygrostat
FUTH to teach-in mode.
4. Brie y press the pushbutton on the ac-
tuator once.
- The FUTH con rms successful teach-in
with 'Telegram r
eceived'.
- The actuator executes a reference run
and assumes the setpoint of the FU
TH.
Normal mode
The actuator communicates with the wire-
less clock/hygrostat FUTH by wireless every
10 mins: The actuator adopts the new set
values and uses them to control the heating.
If you need an additional query of the setpoint
between the normal transmission interval
(e.g. for quick acceptance of the new setpoint
after changing the temperature speci cation
in the room), then brie y press the button once.
Status-LED
The concealed status LED provides feed-
back for certain functions:
1x ash: Single press of pushbutton with
successful teach-in to the remote device;
or after successful communication with the
remote device
3x ash: Single press of pushbutton with failed
teach-in to the remote device; or after failed
communication with the remote device.
Pushbutton opening
Concealed LED
Micro-USB
Pin
Special functions
Event Consequence
Interrupted wireless
connection to the FUTH:
The actuator adjusts to
the last setpoint tempe-
rature transmitted.
Low power: Radiator valve at 50%
and switch to idle state.
As soon as su cient hot
water ows, the actuator
starts up automatically
and resumes control of
the heating. The actuators
storage device can also
be charged via the micro
-
USB.
Limescale protection: To prevent limescale
formation, the actuator
opens and closes the
radiator valve at regular
intervals.
Frost protection:
At very low temperatures
the actuator automati-
cally adjusts the tem-
perature to a value
above freezing point.
Reset: To trigger a reset, de-
press the pushbutton.
After approx. 6 seconds,
the red LED starts to
light up. When the LED
goes out, a reset is trig-
gered and you can re-
lease the pushbutton.
Removal
If the actuator needs to be removed from
the radiator, press the pushbutton once for
3 to 6 seconds. The actuator changes to
installation position. You then have a time
frame of 10 minutes to remove the actuator.
If the actuator was taught in to a FUTH, the
actuator reverts from installation position
back to normal mode.
Technical data
Wireless controller EnOcean protocol:
EEP A5-20-01
Actuating force max. 100 N
Ambient temperature 0-40°C
Media temperature max. 100°C
Size (WxHxD) 62x63x60 mm
Actuating time approx. 4 s/mm
Max. valve stroke 3.8 mm
Connection M 30x1,5
Frequency 868.3 MHz
Transmit power max. 10 mW
Hereby, Eltako GmbH declares that the radio
equipment type FKS-SV is in com pliance
with Directive 2014/53/EU.
The full text of the EU declaration of con-
formity can be accessed via the QR code or
the internet address under 'Documents'.
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 943 500 25
technical-support@eltako.de
eltako.com
11/2023 Subject to change without notice.
Manuals and documents in further
languages
:
http://eltako.com/redirect/FKS-SV
1. App 2. 3.
www.
Product specificaties
| Merk: | Eltako |
| Categorie: | Niet gecategoriseerd |
| Model: | FKS-SV |
Heb je hulp nodig?
Als je hulp nodig hebt met Eltako FKS-SV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Eltako
14 April 2025
14 April 2025
13 Maart 2024
21 Februari 2024
21 Februari 2024
21 Februari 2024
21 Februari 2024
20 Februari 2024
20 Februari 2024
20 Februari 2024
Handleiding Niet gecategoriseerd
- Oklahoma Sound
- Keymall
- Arduino
- GPX
- Engel
- Merlin
- GolfBuddy
- Peavey
- SureFlap
- BrightSign
- SMC
- Cyrus
- SKB
- Hauck
- Polti
Nieuwste handleidingen voor Niet gecategoriseerd
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025