Eltako ER61-UC Handleiding

Eltako Niet gecategoriseerd ER61-UC

Bekijk gratis de handleiding van Eltako ER61-UC (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.8 sterren uit 2 reviews. Heb je een vraag over Eltako ER61-UC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/1

Manuals and documents in further

languages:

http://eltako.com/redirect/ER61-UC

Typical connection

Technical data

Control voltage UC 12..230 V

Rated switching capacity 10A/250 V AC

230V-LED lamps up to 200W

Incandescent lamp and 2000 W

halogen lamp load

230V

Fluorescent lamp load 1000VA

with KVG in lead-lag circuit

or non compensated

Fluorescent lamp load with KVG 500VA

shunt-compensated or with EVG

Compact  uorescent lamps I ein

with EVG and ≤ 70A/10ms

energy saving lamps

Stand by loss (active power) -

For lamps with 150W max.

A 40-fold inrush current must be expected for elec-

tronic ballast devices. For steady loads of 600W use

the current-limiting relay SBR61.

Usually applies for dimmable energy saving lamps

and dimmable 230V LED lamps. Due to differences in

the lamps electronics, there may be a restriction on

the maximum number of lamps; especially if the

connected load is very low (for 5W-LEDs).

1 change over contact potential free

10A/250V AC, incandescent lamp load up

to 2000 W. No standby loss.

For installation.

45 mm long, 45 mm wide, 18 mm deep.

State-of-the-art hybrid technology

combines advantages of nonwearing

electronic control with high capacity of

special relays.

Universal control voltage 12 to 230V UC.

Low switching noise.

By using a bistable relay coil power

loss and heating is avoided even in the

on mode.

The relay contact can be open or closed

when putting into operation. It will be

synchronised at  rst operation.

This relay is not suitable to feed back

the switching voltage signal of a

dimmer switch. Use only relays

ESR12DDX-UC, ESR12NP-230V+UC or

ESR61NP-230V+UC for this purpose.

1. App 2. 3.

www.

Switching relay

ER61-UC

Temperature at mounting location:

-20°C up to +50°C.

Storage temperature: -25°C up to +70°C.

Relative humidity:

annual average value <75%.

61 001 601 - 2

Only skilled electricians may install this

electrical equipment otherwise there is

the risk of  re or electric shock!

Must be kept for later use!

Eltako GmbH

D-70736 Fellbach

Technical Support English:

+49 711 94350025

technical-support@eltako.de

eltako.com

22/2023 Subject to change without notice.

Product specificaties

Merk:	Eltako
Categorie:	Niet gecategoriseerd
Model:	ER61-UC
Stroom:	10 A
Afmetingen (B x D x H):	45 x 45 x 18 mm
Aantal polen:	1
AC-uitgangsvoltage:	250 V
Aantal contacten:	1