Noise Engineering Polydactyl Versio Handleiding
Noise Engineering
Synthesizer
Polydactyl Versio
Bekijk gratis de handleiding van Noise Engineering Polydactyl Versio (6 pagina’s), behorend tot de categorie Synthesizer. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Noise Engineering Polydactyl Versio of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
1
Noise Engineering
Polydactyl Versio
Stereo-in, stereo-out multiband dynamics
processor and saturator on a DSP platform
Type Multiband dynamics
processor
Size 10 HP
Depth 1.5 inches
Power 2x5 Eurorack
Overview
Polydactyl Versio is Noise Engineering’s take on a multiband dynamics processor.
Designed for timbral processing on individual instruments as well as end-of-chain glue,
Polydactyl takes inspiration from Librae Legio’s unique and transparent algorithm and
applies it across three bands for maximal dynamic impact. Add in the multiband
saturation knob, limiter, and noise gate and you have a processor that gives you
ultimate control over the color and dynamics of your sound.
Polydactyl Versio is also a DSP platform and can be transformed into a completely
dierent eect by loading a growing number of alternate rmwares, completely free—or
program your own rmware with open-source documentation.
Etymology
Polydactyl -- from Latin: “many, or more than the usual amount of, ngers or toes”
Versio -- from Latin: “versatile”
“Versatile Toes”
Color code
On boot, the PV’s LEDs will shine with this color
pattern to indicate that it is running the current PV
rmware.
2
Installation
To power your Noise Engineering module, turn o your case.
Plug one end of your ribbon cable into your power board so that
the red stripe on the ribbon cable is aligned to the side that says
-12v and each pin on the power header is plugged into the
connector on the ribbon. Make sure no pins are overhanging the
connector! If they are, unplug it and realign.
Line up the red stripe on the ribbon cable so that it matches the
white stripe and/or -12v indication on the board and plug in the
connector.
Screw your module into your case BEFORE powering on the
module. You risk bumping the module’s PCB against something
metallic and damaging it if it’s not properly secured when
powered on.
You should be good to go if you followed these instructions.
Now go make some noise!
A nal note. Some modules have other headers -- they may
have a dierent number of pins or may say NOT POWER. In
general, unless a manual tells you otherwise, DO NOT
CONNECT THOSE TO POWER.
Warranty
Noise Engineering backs all our products with a product warranty: we guarantee our
products to be free from manufacturing defects (materials or workmanship) for one year
from the date a new module is purchased from Noise Engineering or an authorized
retailer (receipt or invoice required). The cost of shipping to Noise Engineering is paid
by the user. Modules requiring warranty repair will either be repaired or replaced at
Noise Engineering's discretion. If you believe you have a product that has a defect that
is out of warranty, please contact us and we will work with you.
This warranty does not cover damage due to improper handling, storage, use, or abuse,
modications, or improper power or other voltage application.
All returns must be coordinated through Noise Engineering; returns without a Return
Authorization will be refused and returned to sender.
Please contact us for the current rate and more information for repairs for modules that
are not covered by our warranty.
Power
If your Versio looks like the left picture, it requires 70mA +12v and 70mA -12v. If it looks
like the right picture, it requires 125mA +12v and 10mA -12v. Versio does not use the
+5v rail.
3
Product specificaties
| Merk: | Noise Engineering |
| Categorie: | Synthesizer |
| Model: | Polydactyl Versio |
Heb je hulp nodig?
Als je hulp nodig hebt met Noise Engineering Polydactyl Versio stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Synthesizer Noise Engineering
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
18 Maart 2025
Handleiding Synthesizer
- LennarDigital
- GS Music
- Novation
- Kodamo
- Omnitronic
- Roland
- Native
- (Recovery)
- Elektron
- Studiologic
- Korg
- Waldorf
- 2hp
- Arturia
- Ferrofish
Nieuwste handleidingen voor Synthesizer
30 Juni 2025
10 Juni 2025
4 Juni 2025
16 Mei 2025
13 Mei 2025
13 Mei 2025
12 Mei 2025
12 Mei 2025
12 Mei 2025
1 April 2025