Panasonic SL-SX425 Handleiding

Bekijk gratis de handleiding van Panasonic SL-SX425 (6 pagina’s), behorend tot de categorie Hifi systeem. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 4.2 sterren uit 3 reviews. Heb je een vraag over Panasonic SL-SX425 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Dear Customer

Thank you for purchasing this product.

Before connecting, operating or adjusting

this product, please read these instructions

completely. Please save this manual for

future reference.

MODE

1

RQT7028-B

F0203KK0

Portable CD player

Operating Instructions

SL-SX425

SL-SX420

SL-SX419C

SL-SX418

Note:

≥“EB” on the packaging indicates the

United Kingdom.

≥SL-SX419C and SL-SX418 models are not

designed for use with remote control.

Matsushita Electric Industrial Co., Ltd.

Web Site:http://www.panasonic.co.jp/global/

GCEBGN

p

≥Random play modes may be on (

➪

page 6).

≥Play resumes from the track where you last stopped play. Use

skip to return to the first track.

≥This doesn’t work if you change discs.

≥This doesn’t work during random play.

≥It may not work correctly under some conditions.

≥The unit may not read WMA/MP3 correctly if it is shaken

while it is reading the files.

≥You may not be able to play WMA/MP3 if you have copied a

multi-session disc that has no data between sessions.

≥You may not be able to play a WMA disc if it contains large

files, such as JPEG.

≥You cannot play a WMA disc if the copy protection setting

was on when you made the disc.

Disconnect then reconnect all power sources (batteries and AC

adaptor).

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,

consult your dealer for instructions.

Troubleshooting guide

≥The HOLD function is on (

➪

page 4).

≥The disc isn’t correctly set.

≥The disc is scratched or dirty.(Tracks skipped.)

≥There is moisture on the lens. Wait for about an hour and

then try again.

≥The lens is dirty: clean it with a blower (recommended

product: ).If the lens gets marked withSZZP1038C

fingerprints, gently wipe them off with a cotton swab.

≥Ensure the plugs are inserted firmly.

≥Wipe the plugs clean with a clean cloth.

≥Noise may occur when playing WMA/MP3 if recording quality

is poor.

≥The elapsed playing time disappears and sound is interrupted

if bumps continue repeatedly.

Play doesn’t resume

from the track where

play stopped at.

Play doesn’t start

from the first track.

The unit stops

working.

Cannot play WMA/

MP3.

No play.

No sound or there is a

lot of noise.

The operation tone may be off (

➪

page 6).

The batteries may have reached the end of their service life.

Usually they can be recharged 300 times.

Use only the included remote control to operate this unit.

Cannot hear the

remote control’s

operation tone.

The remote control

malfunctions.

This is normal.

≥This may occur after the first time you recharge the batteries

or after you haven’t used them for a long time. Play time

should be restored after a few recharges.

≥The batteries can go flat if you leave the AC adaptor

connected after recharging is complete.

≥You aren’t using the special rechargeable batteries (

➪

page 5).

≥You must insert two batteries before you can recharge them.

≥The unit must be off before you can recharge.

≥

The indicator does not appear when the AC adaptor is connected.

≥The indicator does not appear correctly under some other

conditions.

Play time is short

after recharging.

The battery indicator

fails to appear or is

incorrect.

Cannot recharge.

The AC adaptor becomes

warm during recharging.

Play time is very short

even after recharging.

The batteries may take a maximum of 6 hours to recharge

under some conditions.

The batteries are taking

a long time to recharge.

You cannot search through WMA/MP3 files.

You cannot skip between the first and last albums during play.

Cannot search

through tracks.

Cannot skip albums.

Be sure to connect other equipment through the remote

control. Speakers connected directly to the unit should have an

impedance of 1 k≠or less.

The unit malfunctions

when connected to

other equipment.

≥References to WMA apply only to SL-SX425.

≥References to the remote control apply only to SL-SX425 and SL-SX420.

SL-SX425

SL-SX420

Product specificaties