Webasto BlueCool Connect Handleiding

Webasto Klimaatbeheersing BlueCool Connect

Lees hieronder de 📖 handleiding in het Nederlandse voor Webasto BlueCool Connect (12 pagina's) in de categorie Klimaatbeheersing. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Interface
BlueCool Connect
English
Operating and installation instructions
Table of Contents
2 2510264A OI-II BlueCool Connect_draft12
Table of Contents
1 About this document .......................... 3
1.1 Purpose of this document.......................................... 3
1.2 Using this document..................................................3
1.3 Use of symbols and highlighting ................................ 3
1.4 Warranty and liability................................................. 3
1.5 Used abbreviations .................................................... 3
1.6 Measurements........................................................... 3
2 Safety ................................................. 3
2.1 General...................................................................... 3
2.2 Intended use ............................................................. 3
2.3 Qualifications of installation personnel....................... 3
3 Scope of Delivery ................................ 3
4 Introduction........................................ 4
5 Configuration overview ...................... 4
6 Installation.......................................... 5
6.1 Hardware Installation ................................................5
6.2 Software installation.................................................. 5
7 App navigation ................................... 5
7.1 Start menu BlueCool Connect....................................5
7.2 Settings menu BlueCool Connect...............................6
7.3 Operating a unit ........................................................ 6
7.4 Settings menu BlueCool AC unit ................................ 7
7.5 Creating new groups .................................................7
7.6 Operating a group ..................................................... 8
7.7 Setting the Timer ....................................................... 8
7.8 Adding a new BlueCool Connect ............................... 8
8 Error codes .........................................9
9 Technical data .................................... 9
10 CE-declaration of conformity .............. 9
11 Annex ............................................... 10
About this document | 1
2510264A OI-II BlueCool Connect_draft12 3 / 12
1 About this document
1.1 Purpose of this document
The Operating and Installation Instructions (OI/II) are an integral
part of the product and contain all the information required to
ensure correct and safe operation and installation.
1.2 Using this document
uRead the installation instructions before operating or in-
stalling the unit.
1.3 Use of symbols and highlighting
Sym-
bol
Explanation
î‚„
Action (one or more steps)
P
What to do before the action
Advisory note/tip for usage
Info in separate document(s)
Risk of property damage
Risk of severe/mortal injury
1.4 Warranty and liability
Webasto shall not assume liability for defects or damage that
are the result of the installation and operating instructions being
disregarded. This liability exclusion particularly applies to:
nInstallation by untrained personnel
nImproper use
nRepairs not carried out by a Webasto service workshop
nUse of non-genuine parts
nConversion of the unit without permission from Webasto
nMechanical damage to the equipment
nNon-compliance with inspection and maintenance instruc-
tions
1.5 Used abbreviations
Abbr. Description
ABYC American Boat and Yacht Council
BCC BlueCool Connect
CAN (bus) Controller Area Network (bus)
LAN Local Area Network
NMEA National Marine Electronics Association
1.6 Measurements
NOTE
All measurements are in mm, unless stated otherwise.
2 Safety
2.1 General
CAUTION
Do not carry out work on a live system.
CAUTION
Be aware that BlueCool Connect (BCC) is remote-con-
trol application; BCC can start remotely units such as
heaters, air conditioner and fans. Make sure you do not
inadvertently start systems, causing danger to people
on board the vessel and damage to the vessel.
2.2 Intended use
The BlueCool Connect is an interface unit between the BlueCool
A/C and its control elements.
2.3 Qualifications of installation
personnel
Installation personnel must be qualified to work on technical
systems.
3 Scope of Delivery
Description Qty
BlueCool Connect Interface box 1
Antenna with a 3m long cable 1
Identification labels 2
Quick Start Guide 1
uUnpack all components and check the delivery for complete-
ness and for damage.


Product specificaties

Merk: Webasto
Categorie: Klimaatbeheersing
Model: BlueCool Connect

Heb je hulp nodig?

Als je hulp nodig hebt met Webasto BlueCool Connect stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Klimaatbeheersing Webasto

Handleiding Klimaatbeheersing

Nieuwste handleidingen voor Klimaatbeheersing