WAC Lighting Tressa WS122627 Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van WAC Lighting Tressa WS122627 gratis online of download de PDF. Deze handleiding is 2 keer bekeken. Vraag over dit model? Stel een vraag
HARDWARE
• Read all instructions before installing.
• System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations.
• When handling the xture, do not apply pressure to the LEDs. Hold the xture by the base only.
• Retain installation instructions for future maintenance reference.
: All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts and/or
accessories designated for use by dweLED. Substitution of parts or accessories not designated for use with this product by dweLED could
result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are
damaged or missing.
: Coastal conditions may cause mineral and residue build-up on the xture. We recommend that customers in
coastal areas clean all external surfaces of the xture once every two weeks with a wet cloth.
: Pour éviter tout choc électrique, assurez-vous que le disjoncteur soit mis hors tension avant de commencer.
• Lisez toutes les instructions avant l’installation.
• Le système doit être installé par un électricien licensié conformément au code national de l’électricité (NEC), et également aux
règlements locaux.
• Lors de la manipulation du luminaire, n’appuyez pas sur les LED. Tenez-le uniquement par la base.
: Toutes les pièces doivent être utilisées comme indiqué dans ces instructions. Ce produit est conçu pour être utilisé seulement
avec les pièces et/ou accessoires fournis pour être utilisés avec les produits dweLED. Remplacer des pièces ou accessoires non conçus
pour ce produit dweLED pourrait causer des dommages corporels ou matériels et pourrait également causer l’annulation de la garantie.
Veuillez contacter un revendeur autorisé ou le fabricant si des pièces manquent ou sont endommagées.
: Les conditions côtières peut causer une accumulation de minéraux et de résidue sur le luminaire. Nous recommendons
aux clients qui resident dans les zones côtières de nettoyer toutes les surfaces externes du luminaire une fois toutes les deux semaines avec un
chion humide.
INSTALLATION INSTRUCTIONS
WS122627
A
B
Wire Connector
Qty: 3pcs+1 Extra
Mounting Screw
Qty: 1 Extra
Dec 2025
waclighting.com
Phone (0)8880 526.25
Fa)85x (800 526.25
Headquarters, East Maacturing Facilitynuf
44 Harbor Park Drive
Port Washington, NY 11050
So East Muthanufacturngi Facility
1600 Distribution Ct
Lithia Springs, GA 30122
Central Maactinufurng Facility
1700 SouthElmer Freeway, St J e 100
Cedar Hill, TX04 751
West Macting Facilityanufur
1750 S Archibald Ave
Ontario, CA61 917
1
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
C
Fixing nut
Qty: 1 Extra
8. Secure the xture to the mouting plate use the mounting screw (B).
CONNECTING THE WIRES (Fig. 2)
7. Connect the driver’s input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A) are secured. If your outlet
box has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire directly
to the mounting plate using the GND screw provided. After wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (Fig. 1)
3. Carefully assemble the glass decorative components onto the lamp, tighten them with nuts(C), and conrm that they are installed in place.
4. Remove the mounting screw (B) from the xture, take down the mounting plate.
6. Secure the mounting plate to the junction box using standard junction box screws that comes with the junction box.
Note: (i) using any other non-original-manufacturer provided junction box screw may result in safety issue;
(ii) The side of the mounting back plate marked “GND” must face out.
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
COMPLETING THE INSTALLATION
(Fig. 1)
FIG.1
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
INSTALLATION INSTRUCTIONS
WS122627
Mounting Plate Dimensions
B
Mounting Screw
A
Wire Connector
Junction Box Screw
Mounting Plate
Junction Box
Fixture
Driver
4000K 3500K 3000K 2700K
Fig.3 4CCT Switch
5. Set color temperature at this stage. The xture can switch between four color temperatures (2700K,3000K, 3500K,4000K), which can be
adjusted to your preference using the 4CCT switch (Fig. 3) mounted on the mounting plate.
Note: the switch comes with a detachable cover, remove the cover prior to adjusting the color temperature, reattach the cover after
adjustment is made.
Fixture must be powered o to adjust the CCT setting, after each CCT adjustment cycle power on, o then on to show new CCT setting.
4CCT Switch
4CCT Switch Cover
Canopy
Dec 2025
waclighting.com
Phone (0)8880 526.25
Fa)x (800 526.2585
Headquarters, East Maacturing Facilitynuf
44 Harbor Park Drive
Port Washington, NY50 110
So East Mactuthanufurngi Facility
1600 Distribution Ct
Lithia Springs, GA22 301
Centr Maacti Facilityalnufurng
1700 SouthElmer Freeway, St J e 100
Cedar Hill, TX 75104
West Manufuracting Facility
1750 S Archibald Ave
Ontario, CA61 917
2
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
Glass decorative components
Fixing nut
C
4
a
"
5
8
"
1
w
"
1
a
"
Product specificaties
| Merk: | WAC Lighting |
| Categorie: | Niet gecategoriseerd |
| Model: | Tressa WS122627 |
Heb je hulp nodig?
Als je hulp nodig hebt met WAC Lighting Tressa WS122627 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden