WAC Lighting Chloe BL110610 Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van WAC Lighting Chloe BL110610 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
HARDWARE
• Read all instructions before installing.
• System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations.
• When handling the xture, do not apply pressure to the LEDs. Hold the xture by the base only.
• Retain installation instructions for future maintenance reference.
: All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts and/or
accessories designated for use by dweLED. Substitution of parts or accessories not designated for use with this product by dweLED could
result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the manufacturer if any parts are
damaged or missing.
: Coastal conditions may cause mineral and residue build-up on the xture. We recommend that customers in
coastal areas clean all external surfaces of the xture once every two weeks with a wet cloth.
: Pour éviter tout choc électrique, assurez-vous que le disjoncteur soit mis hors tension avant de commencer.
• Lisez toutes les instructions avant l’installation.
• Le système doit être installé par un électricien licensié conformément au code national de l’électricité (NEC), et également aux
règlements locaux.
• Lors de la manipulation du luminaire, n’appuyez pas sur les LED. Tenez-le uniquement par la base.
: Toutes les pièces doivent être utilisées comme indiqué dans ces instructions. Ce produit est conçu pour être utilisé seulement
avec les pièces et/ou accessoires fournis pour être utilisés avec les produits dweLED. Remplacer des pièces ou accessoires non conçus
pour ce produit dweLED pourrait causer des dommages corporels ou matériels et pourrait également causer l’annulation de la garantie.
Veuillez contacter un revendeur autorisé ou le fabricant si des pièces manquent ou sont endommagées.
: Les conditions côtières peut causer une accumulation de minéraux et de résidue sur le luminaire. Nous recommendons
aux clients qui resident dans les zones côtières de nettoyer toutes les surfaces externes du luminaire une fois toutes les deux semaines avec un
chion humide.
INSTALLATION INSTRUCTIONS
BL110610
A
B
Wire Connector
Qty: 3pcs+1 Extra
Mounting Screw
Qty: 1 Extra
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous impvement program. roNov.20251
waclighting.com
Phone (800) 526.2588
Fax (8) 00526.2585
Headquarters,EastMafacturingFacilitynu
44 Harbor Park Drive
PortWashington, NY 11050
South EastMfactung Facilityanuri
1600 Distribution Ct
Lithia Springs, GA 32201
Central MaacturingFacilitynuf
1700 South J ElmerFreeway, Ste 100
CedarHill,T04X 751
WestManufacturing Facility
1750 S ArchibaldAve
Ontario, CA 91761
FIG.1
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig.2 Wiring
INSTALLATION INSTRUCTIONS
BL110610
Mounting Plate Dimensions
B
Mounting Screw
A
Wire Connector
Junction Box Screw
Mounting Plate
Junction Box
Fixture
Canopy
4
2
1
a
1
w
4
4
Driver
Switch
Pivot：
Horizontal 0~24 degrees;
Vertical 0~24 degrees
Touch Dimming Function:
1. Long press for dimming feature
2. Short press to toggle from main
light/pivot light and on/o
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
3. Remove the mounting screw (B) from the xture.
4. Secure the mounting ring to the junction box using standard junction box screws that comes with the junction box.
: (i)using any other non-original-manufacturer provided junction box screw may result in safty issue.
(ii) The side of the mounting ring marked “GND” must face out.
5 Connect the driver’s input wires to junction box wires as shown (Fig. 2). Make sure that all wire connectors (A) are secure. If your outlet
box has a green or bare copper ground wire, connect the driver’s ground wire to it. Otherwise, connect the xture’s ground wire
directly to the back plate using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
6. Secure the xture to the mounting ring using the mounting screw (B).
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous impvement program. roNov.2025
2
waclighting.com
Phone (800) 526.2588
Fax 6.2585(8) 0052
Headquarters,EastMafacturingFacilitynu
44 Harbor Park Drive
PortWashington, NY 11050
South EastMfactuanuring Facility
1600 Distribution Ct
Lithia Springs, GA 32201
Centr MaacturingFacilityalnuf
1700 South J ElmerFreeway, Ste 100
CedarHill,T04X 751
WestManufacturing Facility
1750 S ArcbaldAve hi
Ontario, CA 91761
Product specificaties
| Merk: | WAC Lighting |
| Categorie: | Niet gecategoriseerd |
| Model: | Chloe BL110610 |
Heb je hulp nodig?
Als je hulp nodig hebt met WAC Lighting Chloe BL110610 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden