WAC Lighting Even 6703 Handleiding
Pagina's 3 Niet gecategoriseerd
Bekijk de handleiding van WAC Lighting Even 6703 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
INSTALLATION INSTRUCTION
LOW LEVEL BOLLARD 12V
6162 / 63 / 64 / 6570 / 70707070
6701
Mounting Stake
Qty: 1pc
Outdoor Rated Wire Nut
Qty: 2pcs
Hex Key
Qty: 1pc
SAFETY INSTRUCTION
IMPORTANT: NEVER attempt any work without shutting off the electricity.
•Read all instructions before installing.
•System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.
•Place the wall switch in the “OFF” position.
•Go to the main fuse box, or circuit breaker. Unscrew the fuse(s) or switch ”OFF” the circuit breaker switch(es) that control the power to the
space that you are working on.
CAUTION:
All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out
or broken. Failure to follow this instruction could invalidate the UL listing of this fixture.
AVERTISSEMENT
IMPORTANT : COUPEZ L’ÉLECTRICITÉ AVANT TOUTE MANIPULATION.
•Lisez toutes les instructions avant d’installer.
•Système est destiné à être installé par un électricien qualifié en conformité avec le code national de l’électricité et les règlements locaux.
•Placez l’interrupteur mural en position d’arrêt (« OFF »).
•Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
MISE EN GARDE
Toutes les pièces doivent être utilisées tel qu’il est indiqué dans ces instructions. Ne remplacez pas les pièces, n’en laissez pas de côté et ne les
utilisez pas si elles sont usées ou brisées. Le non-respect de ces instructions peut annuler l’homologation UL du luminaire.
THIS INSTRUCTIONS APPLY TO THE MODELS BELOW:
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Oct 2025
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters, East Manufacturing Facility
44 Harbor Park Drive
Port Washington, NY 11050
South East Manufacturing Facility
1600 Distribution Ct
Lithia Springs, GA 30122
Central Manufacturing Facility
1700 South J Elmer Freeway, Ste 100
Cedar Hill, TX 75104
West Manufacturing Facility
1750 S Archibald Ave
Ontario, CA 91761
1
*Note: Transformer is required to power the fixture. (Sold Separately)
6705
666702703704
Concrete Pour Kit
(Order Separately)
INSTALLATION
1.Make sure your main power is off.
2.Excavate a trench for the Mounting Stake.
The Mounting Stake requires approximately a one (1) square
foot hole to facilitate installation.
The excavated should be approximately 14” deep,
depending on your local code. This will allow the hex-head
set screw on the Mounting Stake to remain above ground
when the installation is completed.
3.Secure Fixture Mounting Plate onto the Stake Metal Cap by
using the Stake Mounting Screws.
4.Secure the Stake Metal Cap assembly onto the
Mounting Stake by tighten the Cap Mounting Screw
(Note: Make sure the Fixture Mounting Plate is
Oriented at desired position.)
5.Secure the Bollard Fixture on top of the Fixture
Mounting Plate using the Fixture Mounting Screws.
6.After proper wirings are done by using the outdoor rated
wire nuts, back fill the hole and make sure the fixture is
leveled and stable.
7.Turn the main power supply back on and make sure the
fixtures light up
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Oct 2025
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters, East Manufacturing Facility
44 Harbor Park Drive
Port Washington, NY 11050
South East Manufacturing Facility
1600 Distribution Ct
Lithia Springs, GA 30122
Central Manufacturing Facility
1700 South J Elmer Freeway, Ste 100
Cedar Hill, TX 75104
West Manufacturing Facility
1750 S Archibald Ave
Ontario, CA 91761
2
Fixture
Mounting Screws
Stake Mounting Screws
Fixture Mounting Plate
Stake Metal Cap
Mounting Stake
INSTALLATION INSTRUCTION
LOW LEVEL BOLLARD 12V
6162 / 63 / 64 / 6570 / 70707070
INLLINANCHBSTAG OR
ONCRLT IN COETE (Order Separately)
1.
2.
And alignment plate into the cement. Insure the leads,
electrical wires are passing up through the center hole
of the alignment plate.
For shallow base bollards, insure that the anchor bolts
length on top of the cement surface do not exceed
1-1/8” (29mm).
3.After the cement has cured, remove the alignment
Plate and install the Fixture Baseplate until it’s secure. Again,
make sure to feed the leads, electrical wires up through the
center hole of the baseplate.
Fixture Housing
Hex Nut
Spring Washer
Flat Washer
Hex Nut
Concrete
29mm
1-1/8”
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Oct 2025
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters, East Manufacturing Facility
44 Harbor Park Drive
Port Washington, NY 11050
South East Manufacturing Facility
1600 Distribution Ct
Lithia Springs, GA 30122
Central Manufacturing Facility
1700 South J Elmer Freeway, Ste 100
Cedar Hill, TX 75104
West Manufacturing Facility
1750 S Archibald Ave
Ontario, CA 91761
3
FITURINSXE TALLATION
1.Use leveler to ensure that the baseplate is leveled. Connect the
supply lines from the supply conduit to the
(See Wiring Diagram Below)
Tie the wires so that they do not lie on or have
Contact with the ground.
2.Set the Bollard Fixture onto the Fixture Baseplate
3.
Screws with Hex Key. Be sure not to crimp any wires between
the Fixture Baseplate and the Fixture Housing Tube.
4.Turn the main power supply back on and make sure the
5.
Alignment Plate
(Shown as Example)
Anchor Bolts
Fixture
Fixture Mounting
Screws
Hex Key
Hex Nuts + Washers
Fixture Baseplate
Anchor Bolts
Concrete
Outdoor Rated
Wire Nuts
INSTALLATION INSTRUCTION
LOW LEVEL BOLLARD 12V
6162 / 63 / 64 / 6570 / 70707070
(Order Separately)
Product specificaties
| Merk: | WAC Lighting |
| Categorie: | Niet gecategoriseerd |
| Model: | Even 6703 |
Heb je hulp nodig?
Als je hulp nodig hebt met WAC Lighting Even 6703 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden