WAC Lighting HR-800 Handleiding
Pagina's 1 Niet gecategoriseerd
Bekijk de handleiding van WAC Lighting HR-800 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2014
INSTALLATION INSTRUCTION
2.5” Low Voltage - For Cabinet Use
HR-800
SAFETY INSTRUCTION
IMPORTANT: NEVER attempt any work without shutting o the electricity.
• Read all instructions before installing.
• For installation by a qualied electrician.
• System is intended for installation in accordance with National Electric Code, and local regulations.
Consult with local inspector to assure compliance.
• To reduce the risk of re, electrical shock and injuries to persons, turn o power at main switch before installing or
modifying the system.
• Retain instructions for future maintenance reference.
OVERVIEW
Cabinet housing not intended for use in walls and ceilings. 35 watts maximum.
Housing requires a trim from the HR-800 series, lamp and a remote transformer
to be complete (ordered separately).
CUT OUT:
Use the template (supplied) to make a 3” cut out hole in the surface.
WIRING:
Housing is supplied with 36” of socket wire.
Wires must be joined to the output wires from a low volt transformer.
MOUNTING:
1. Insert the can through the hole in the mounting surface.
2. Hold the rim snug to the surface.
3. From inside the housing push and pivot the housing clips so
they make contact with the top of the surface.
Note: 3/4 inch maximum thickness.
FINISHING:
1. Socket wire is sucient in length to be attached to
the pins of the lamp before it is inserted.
2. Push the trim assembly up until the trim ring is ush
to the mounting surface.
Product specificaties
| Merk: | WAC Lighting |
| Categorie: | Niet gecategoriseerd |
| Model: | HR-800 |
Heb je hulp nodig?
Als je hulp nodig hebt met WAC Lighting HR-800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden