Smart-AVI XTP-RXLS Handleiding

Smart-AVI AV extender XTP-RXLS

Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI XTP-RXLS (8 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

User Manual

XTPro Xtreem

Use a Single Cat5 to Broadcast High-Resolution

SXGA, Stereo Audio, RS-232 and Infrared Signals

up to 1,699 Feet Away

Introduction

The XTPro family of products allows the extension of a wide range of video and audio

formats, RS-232, and IR via a single Category 5 unshielded twisted pair (UTP) cable.

Features

 Supports Single Screen

 Uses Easy-to-Install, Inexpensive Cat5/5e/6/7/8

 Output Reaches up to 1,699 Feet (510 m)

 Resolutions up to 1900 x1200

 300 MHz Bandwidth

 Sends High-Resolution UXGA and Stereo Audio

 Compatible with Line Level Stereo

 High Ground Loop Immunity

 Built-In Lightning, Power Surge and Transient Protection

 Designated Trimmer and Digital Compensate System

 Compact Metal Case Enclosure

 Supports RS-232 and IR

What’s in the box?

XTPro Xtreem - Please check the contents of the package before beginning installa-

tion.

XTPro Xtreem Package Contents

Qty Item P/N

1 XTPro Transmitter XTP-TX

1 XTPro Receiver Unit-Long Distance XTP-RXX

1 Power Supply PS-5 2VDC A

1 Remote Control RMT-2

Installation Diagram

Connecting The Transmitter

1. Connect the output of the computer video card to the eo vid in utp of the

transmitter us the ing included m to-male video cable.ale-

2. Connect the output of the computer audio card to the audio input of the

transmitter using a 3.5mm audio male-to-male audio cable.

3. Connect local monitor to the VGA out of the transmitter.

4. Connect external speakers to the transmitter’s audio out (standard 3.5mm stereo

miniplug).

5. On the back of the unit, attach the Cat5 cable that will connect to the receiver

(XTPro-RXX).

*NOTE: You can not use RS-232 and IR at the same time.

Connecting The Receiver

1. Connect Cat5 cable (coming from the transmitter) to the back of the receiver.

2. Connect 1 display to the VGA out connectors on the front of the

receiver.

3. Connect external speakers to the audio output connections on the front

of the unit (standard 3.5mm stereo miniplug).

Preparing & Connecting System Cat5 Cable

The following is the wiring standard for terminating Cat5 cable using RJ-45 connector:

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

Connectors: RJ-45

Capacitance: 14 pf/ft (46.2 pf/m)

Conductor Gauge: 24 AWG

Impedance: 4 - Pair

Product specificaties

Merk:	Smart-AVI
Categorie:	AV extender
Model:	XTP-RXLS
Kleur van het product:	Violet
Gewicht:	120 g
Soort:	AV-receiver
LED-indicatoren:	Ja
Ondersteunde video-modi:	1080i, 1080p, 720p
Maximum resolutie:	1920 x 1200 Pixels
VGA (D-Sub)poort(en):	3
Aansluiting voor netstroomadapter:	Ja
Audio-uitgang:	2
Externe adapter:	Ja
Afmetingen (B x D x H):	95 x 80 x 23 mm
RJ-45 invoer ports:	1
Operating voltage:	5 V
Ondersteundende kabel types:	Cat5, Cat5e, Cat6, Cat7
Aansluiting type:	HD15