DVDO -CAT4K-70-CC Handleiding

Bekijk gratis de handleiding van DVDO -CAT4K-70-CC (2 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over DVDO -CAT4K-70-CC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

· ImportantSafety Notice

·Package Contents

Transmitter unit x1pc Receiver unit x1pc DC5V/2A x2pcs

User manual x1pcIR blaster extensionIR receiver extension

cable*1 cable*1

Mounting brackets x4pcs Screw x10pcs Screw x2pcs

· InstallationRequirements

1. HDMI source device (compute graphics card, DVD, PS3, )HD

monitoring equipment etc.

2. HDMI display device like SDTV, HDTV, projector with HDMI port.

3. UTP/STP CAT6/CAT6A/CAT7 cable. Follow standard IEEE-568B,

It is recommended to select a network cable with less loss and crosstalk.

2

·Interfaces

1.Transmitter (TX)

① ② ③

④ ⑤ ⑥ ⑦ ⑧

1

Reset button

Press to restart the device

2

Rj45 signal

output

Connect with network cable

3

Power/Signal

indicator

When there is power and no HDMI signal,

the indicator will flash, when there is HDMI

signal, the indicator will light solid blue

4

DC5V input

Connect with DC5V/2A power adapter

5

HDMI output

Connect with HDMI display device

6

HDMI input

Connect with the source device

7

IR in

Connect with IR receiver extension cable,

please make sure the remote control used

is within the effective range

8

IR out

Connect with IR blaster extension cable,

please get closer to the source device

while using

3

2. Receiver (RX)

①② ③ ④

⑤ ⑥⑦ ⑧ ⑨ ⑩

1. Do not mix up HDMI to RJ45 transmitter and RJ45 to HDMI receiver

before installation.

2. Do not hot plug when it is working.

3. Use DC5V/2A power supply only. Make sure specification matched

if using 3rd party adapters.

4. Static electricity will cause damage of the device, please do ESD

protection when using the device.

·Introduction

DVDO-CAT4K-70-CC includes a transmitter unit and a receiver unit,

allowing HDMI signals to be transmitted up to 70 meters at 4K

resolution using a CAT6/6A/7 network cable. It is perfect for outdoor

advertising, video clips, monitor system, home entertainment, and

conference, etc.

·Features

1. Zero latency.

2. 4K@60Hz HDMI signal can be transmitted 70 meters through a

CAT6/6A/7 network cable.

3. Supports up to 10 receivers in cascade, auto adapt to display resolution

(additional receivers sold separately – P/N: DVDO-CAT4K-70-CC-Rx).

4. The receiver can extract the digital audio from the transmitter through the

S/PDIF port.

5. Supports HDR10.

6. Supports EDID passthrough, auto downscaling.

7. Transmitter support one HDMI loop-out.

8. Support bi-directional IR passback function (20~60KHz).

9.Lightning Protection, Surge Protection, ESD Protection.

1

1

Reset button

Press to restart the device

2

Audio switch

Choose to decode audio from HDMI or

ARC output from fiber optic interface

3

Rj45 signal input

Connect with network cable

4

Power/Signal indicator

When there is power and no HDMI

signal, the indicator will flash, when

there is HDMI signal, the indicator

will light solid blue

5

DC5V input

Connect with DC5V/2A power adapter

6

Rj45 signal output

Connect with network cable

7

S/PDIF out

Output digital audio signal.

8

HDMI output

Connect with HDMI display device

9

IR in

Connect with IR receiver extension

cable, please make sure the remote

control used is within the effective

range

10

IR out

Connect with IR blaster extension cable,

please get closer to the source device

while using

4

DVDO-CAT4K-70-CC

4K60 HDMI 70m Cascading Extender over Category with ARC

DVDO │ +1.408.213.6680 │ supp[email protected] │ www.dvdo.com

User Manual

Version v1.0

Product specificaties