Smart-AVI DVX-PROS Handleiding

Smart-AVI AV extender DVX-PROS

Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI DVX-PROS (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained herein

or for incidental or consequential damages in

connection with the furnishing, performance or use

of this material.

No part of this document may be photocopied,

reproduced or translated into another language with

out prior written consent from Smart-AVI.

The DVX-PRO extends any DVI-D signal,

full duplex RS232 and stereo sound up

to 250ft with Cat6 STP cable

DVX-PRO

www.smartavi.com

User Manual

3111 Winona Ave., Suite 101

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

Input/Output Signal

#niP langiS #niP langiS

1 -2ataDS.D.M.T 61 tceteDgulPtoH

2 +2ataDS.D.M.T 71 -0ataDS.D.M.T

3 dleihS4/2ataDS.D.M.T 81 +0ataDS.D.M.T

4 -4ataDS.D.M.T 91 dleihS5/0ataDS.D.M.T

5 +4ataDS.D.M.T 02 -5ataDS.D.M.T

6 kcolCCDD 12 +5ataDS.D.M.T

7 ataDCDD 22 dleihSkcolCS.D.M.T

8 cnyS.treVgolanA 32 +kcolCS.D.M.T

9 -1ataDS.D.M.T 42 -kcolCS.D.M.T

01 +1ataDS.D.M.T

11 dleihS3/1ataDS.D.M.T 1C deRgolanA

21 -3ataDS.D.M.T 2C neerGgolanA

31 +3ataDS.D.M.T 3C eulBgolanA

41 rewoPV5+ 4C cnySzroHgolanA

51 DNG 5C dnuorGgolanA

PIN 17

PIN 1

PIN 24

PIN 8

C 4

C 1

C 2

C 5

C 3

3MART!UDIO6IDEO)NTEGRATION3MART!UDIO6IDEO)NTEGRATION

Resolutions

Supported by the internal EDID configuration

640 x 480 85 Hz

800 x 600 85 Hz

1024 x 768 85 Hz

1152 x 870 75 Hz

1280 x 768 75 Hz

1280 x 960 60 Hz

1280 x 1024 60 Hz

1600 x 1200 60 Hz

1920 x 1200 60 Hz

Resolution Refresh Rate

5VDC 1.6A

Pair 1 Pins 1 & 2

Pair 2 Pins 3 & 6

Pair 3 Pins 4 & 5

Pair 4 Pins 7 & 8

Connectors: RJ-45

Capacitance: 14 pf/ft (46.2 pf/m)

Conductor Gauge: 24 AWG

Impedance: 100 +/- 15 ohms

4 - Pair, (stranded) Foil Shielded

Prepairing System CAT6 CablePrepairing System CAT6 CablePrepairing System CAT6 CablePrepairing System CAT6 CablePrepairing System CAT6 Cable

Introduction

The DVXPRO extends the distance between any

computer supporting single-link DVI-D and a

monitor or projector with a compatible DVI input.

Features

Top Image Quality at all Resolutions.

Video Resolutions up to 1920 x 1200 @ 60Hz

(1280 x 1024 @ 75Hz). on all distances up to

the maximum distance.

User selectable: DCC-Information used from

the remotely located monitor, from the locally

located Monitor or from an internal DDC

Table.

Basic device to remotely locate Touch Screen

and Sound.

Full duplex RS232 up to 150kbps.

Maximum Screen Resolution on all distances:

250 ft w/ STP Cat5e.

Compatible with all operating systems.

Compatible with all major Touch Screen and

Tablet.

Rack Mount options (19”): Mount up to 4 de-

vices in a 19”/1U rack mount kit.

Supports Stereo Sound.

Applications

Perfect Image Quality at all Resolutions.

Call Centers (co-locate user’s computers).

Installation

1. Turn off computer and monitor.

2. Connect DVI male to male cable between the

computer and the transmitter.

3. Connect monitor or projector to the DVI port

on the receiver.

4. Connect RS232 port

5. Connect audio cable

6. Connect a shielded Cat 6 STP cable

between port 1 on the transmitter and port 1

on the receiver.

7. Plug in the power transformers and connect

them to the transmitter and receiver.

8. Turn on the monitor and computer.

Optional DDC Pass-Through

If you would like the computer to read EDID

information directly from your monitor instead of

the internal EEPROM in the DVXPRO, perform the

following steps.

1. Turn off computer and monitor.

2. Disconnect power adapters from transmitter

and receiver.

3. Remove screws on the sides of the transmitter.

4. Lift the top off of the chassis

5. Locate headers labeled J12 and J13.

6. Reconfigure the jumpers as shown.

7. Replace chassis top and screws.

8. Connect a second shielded Cat 6 STP cable

between port 2 on the transmitter and port 2 on

the receiver.

Installation Diagram

J13 J12

Setting the DDC

DDC provides plug-and-play capability to your

displays. When you plug a display into your computer,

the DDC table in the display tells the computer the

optimal resolution to use. This device is capable of

supporting two primary types of displays: PC and Mac.

The default setting is PC.

For Mac, congure the

switches as shown below:

For PC, congure the

switches as shown below:

1&2 ON, 3&4 OFF 1&2 OFF, 3&4 ON

To change this setting,

rst remove the top cover

from the TRANSMITTER

by removing the four side

screws. Next, locate the

DIP switches near the rear

of the device next to the

Data Port (RJ45 Ethernet

Port).

Product specificaties

Merk:	Smart-AVI
Categorie:	AV extender
Model:	DVX-PROS
Kleur van het product:	Black, Violet
Gewicht:	181 g
LED-indicatoren:	Ja
Maximum resolutie:	1920 x 1200 Pixels
Aansluiting voor netstroomadapter:	Ja
Audio-uitgang:	1
Externe adapter:	Ja
DVI input ports:	1
Afmetingen (B x D x H):	158.8 x 155.6 x 21 mm
Bandbreedte:	15 MHz
RJ-45 invoer ports:	2
Operating voltage:	5 V
Ondersteundende kabel types:	Cat6