Smart-AVI FDX-AVS Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Smart-AVI FDX-AVS (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
© Copyright 2012 Smart-AVI, All Rights Reserved
NOTICE
The information contained in this document is subject to change
without notice. Smar tAVI makes no warranty of any kind with regard
to this material, including but not limited to, implied warranties
of merchantability and fitness for any particular purpose.
SmartAVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from SmartAVI.
For more information, visit www.smartavi.com.
The FDX-AV consists of a transmitter and
receiver that extend DVI-D, audio and RS-
232 signals up to 1,400 feet over a single
multimode ber optic cable.
FDX-AV
DVI-D Video, Stereo Audio, and RS-
232 Extender over Fiber Optic Cable
www.smartavi.com
Installation
Manual
What’s in the Box?
PART NO. QTY DESCRIPTION
FDX-TXAV 1 FDX-AV Transmitter Unit - DVI-D, Stereo
Audio and RS-232 Extender over Fiber Op-
tic Cable
FDX-RXAV 1 FDX-AV Receiver Unit - DVI-D, Stereo Au-
dio and RS-232 Extender over Fiber Optic
Cable
Power Supply 2 PS5VDC4A
Technical Specications
VIDEO
Format DVI-D Single Line
Maximum Pixel Clock 165 MHz
Input Interface (1) DVI-D 29-pin female
Output Interface (1) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC Internal
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
AUDIO
Frequency Response 20 Hz to 20 KHz
Impedance 600 ohm
Nominal Level 0-1.0 V
Common Mode Rejection at 60dB
Input Interface (1) 3.5 mm Stereo Audio
Output Interface (1) 3.5 mm Stereo Audio
OTHER
Power External 100-240 VAC/5VDC4A @20W
Dimensions 4.5”W x 5.375”H x 1.75”D
Weight 1 lb.
Approvals UL, CE, ROHS Compliant
Operating Temp. 32-131°F (0-55 °C)
Storage Temp. -4-185 °F (-20-85 °C)
Humidity Up to 95%
RS-232 Data up to 115,000 bps
FDX-AV Receiver Front
FDX-AV Receiver Rear
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: (818) 503-6200 Fax: (818) 503-6208
http://www.SmartAVI.com
Introduction
The FDX-AV consists of a transmitter and receiver that
extend DVI-D, audio and RS-232 signals up to 1,400 feet
over a single multimode ber optic cable.
Features
• Top Signal Quality at Maximum Extension Over
Multimode Fiber (1,400 ft.)
• Superior Image Quality at all Resolutions
• Video Resolutions up to 1920 x 1200 at 60Hz (1280
x 1024 at 75Hz)
• Customizable/Programmable DDC Table
• Supports Stereo Audio
• Supports DVI-D
• Supports RS-232 Control from 300bps to 115,000bps
• Supports all USB Keyboards Fully Transparent
• Fiber Plug Type LC
• Compatible With all Operating Systems
• Compatible With all Major KVM Switches
• Compact Metal Casing
Applications
• Corporate or Educational Presentations
• Financial (Remote Servers/User Control)
• Call Centers
• Industrial (Long-Range Workstation Isolation)
• Information Terminals/Kiosks
• Airport Installations (Air Trac Control/Passenger
Information)
• KVM Extension where Exceptional Quality of Signal
is Crucial
• Medical (Remote Operation Away from Sensitive/
Magnetic Equipment)
• Recording (for Large Studios where Editing/Mixing
Stations are Compact and/or Require Complete
Silence)
Installation
1. Turn o the computer, display, and speakers.
2. Connect the DVI extension cable, USB cable, and audio cable (not included) to the computer and to the ports on
the FDX-AV-TX.
3. Connect the display to the DVI connector on the FDX-AV-RX.
4. Connect speakers to the audio connector on the FDX-AV-RX.
5. Connect the power cord and power on the FDX-AVTX and the FDX-AV-RX.
6. Power on the computer, display and speakers.
Receiver Transmitter
Fiber Optic Cable up to 1,400 ft.
Product - Installation Diagram
Why Fiber Optic?
SmartAVI has created a full line of ber optic
extender products, understanding that this
technology is superior to traditional cabling.
Fiber optic cables are:
• capable of transmitting over very long
distances with no signal loss.
• immune to electromagnetic interference.
In situations where there is considerable
interference, ber optic cabling is the only
solution.
• much more secure because they cannot be
easily tapped. For this reason, military and
law enforcement agencies use ber optic
cables for the transmission of sensitive data.
• relatively inexpensive and small enough to
be routed through small spaces.


Product specificaties

Merk: Smart-AVI
Categorie: AV extender
Model: FDX-AVS
Kleur van het product: Black, Violet
Gewicht: 3630 g
Soort: AV-zender & ontvanger
LED-indicatoren: Ja
Maximum resolutie: 1920 x 1200 Pixels
Aansluiting voor netstroomadapter: Ja
Audio-uitgang: 1
Externe adapter: Ja
DVI input ports: 1
Afmetingen (B x D x H): 114 x 140 x 43 mm
Bandbreedte: 15 MHz
Operating voltage: 5 V

Heb je hulp nodig?

Als je hulp nodig hebt met Smart-AVI FDX-AVS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding AV extender Smart-AVI

Handleiding AV extender

Nieuwste handleidingen voor AV extender