SkyRC e455 Handleiding

Bekijk gratis de handleiding van SkyRC e455 (2 pagina’s), behorend tot de categorie Batterij-oplader. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.2 sterren uit 6 reviews. Heb je een vraag over SkyRC e455 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for your choice of the SKYRC e455, 100-240V AC balance charger. This unit is simple to use

but its operation does require some knowledge on the part of the user. Please read this entire operating

manual completely and attentively before using this product, as it covers a wide range of information on

operating and safety.

SKYRC e455 Charger is an economical, high quality 100-240V AC balance charger, designed for

charging LiPo, LiFe and LiHV batteries from 2-4 cells in balance mode. It can charge 6-8S NiMH batteries

also. The circuit power is 50W and max charge current can reach to 4A. There are four kinds of charge

current 1A/2A/3A/4A that can be selected. You could select the proper charge current according to battery

capacity.

INTRODUCTION

OPERATION

SKYRC e455 comes with the built in power supply. You can connect the AC power cord to the AC

socket(100-240V AC) directly.

Insert the AC power cord into the charger.

Insert the AC cord into a wall socket (100-

240V). The battery type LED and the charge

current LED(default 2A) will glow constant

white.

Connect battery balance wire to balance port

which is in front side of the charger, select the

battery type LiPo/LiFe/LiHV by pressing the

"BATT" button.

Select the proper charging current 1A/2A/3A/4A by pressing the “A” button.

Connect the battery main charge lead to battery socket which is in the front side of the charger and

battery balance wire to balance port which is in the right side of the charger.

Press and hold “A" button for 2 seconds to start charging. The charge status LED will glow to indicate

charging is in progress.

When the battery is fully charged, the charge status LED will glow constant WHITE. Unplug the

battery from the charger, the charger will be ready to charge another battery.

During the charging process, if you want to stop charging, press the “A” button once.

Please refer to following steps to charge the battery,

1)

2)

3)

4)

5)

INSTRUCTIONMANUAL

SK-100170

Multi Chemistry Charger

Charging LiPo/LiFe/LiHV Battery

The charge current varies from 1A(1000mA) to

4A(4000mA). The recommended charge rate is 1C

(battery capacity = charge current). 1C means:

capacity value = charge current.

Example:

LiPo cell of 2200mAh Capacity; 1C=2200mA

(=2.2A) charge current. You can choose 2A

current to charge the battery.

LiPo cell of 2800mAh Capacity; 1C=2800mA

(=2.8A) charge current. You can choose 3A

current to charge the battery.

6)

Charging NiMH Battery

Connect the battery main charge lead to battery socket which is in the front side of the charger.

Select the battery type NiMH by pressing the "BATT" button.

Select the proper charging current 1A/2A/3A/4A by pressing the “A” button.

Press and hold “A" button for 2 seconds to start charging. The charge status LED will glow to indicate

charging is in progress.

During the charging process, the capacity indicator LEDs will light up in sequence.

When the battery is fully charged, the capacity indicator LEDs will glow constant white.

Always make sure you are charging NiMH battery under NiMH mode. Charging Lithium

Battery under NiMH mode can lead fire, personal injury or property damage.

WARNING:

SPECIFICATION

AC Input

Battery Type

Cell Count

Charge Current

Cell Terminate Voltage

Circuit Power

Current Drain for Balancing

Dimension

Weight

100-240V

LiPo/LiFe/LiHV/NiMH

LiPo/LiFe/LiHV: 2-4S

NiMH: 6-8S

1A/2A/3A/4A ± 10%

LiPo: 4.2V ± 0.02V / LiFe: 3.6V ± 0.02V

LiHV: 4.35V ± 0.02V / NiMH: -△V

50W

300mA

110x70x40mm

191g

LED Blinking Times

Problem

Select Battery Type

Select Charging Current

Balance Port

BatterySocket

AC 100-240V

PowerJack

Battery Type Indicator

Battery Type

Button

Current Switch

Current & Capacity

LED Indicator

TO 100-240V AC

Socket

This diagram shows the

correct way to connect

your battery to the e455

charger while charging.

Failure to connect as

shown in this diagram will

damage this charger.

CAUTION:

LiPo

CONNECTION DIAGRAM

EXPLANATION OF LED STATUS

25%≤Capacity<50%

75%≤Capacity<100%

50%≤Capacity<75%

Remark:

The capacity indicator LED flash times shows the charge current you set.

1A Flashes white ONCE and stop 1 second in cycle.

2A Flashes white TWICE and stop 1 second in cycle.

3A Flashes white THREETIMES and stop 1 second in cycle.

4A Flashes white FOURTIMES and stop 1 second in cycle.

All LEDs flash white ONCE and

stop 2 seconds in cycle

All LEDs flash white TWICE and

stop 2 seconds in cycle

All LEDs flash white THREE TIMES

and stop 2 seconds in cycle

Voltage of one cell in the battery pack is too high

Connection error in Balance port

Connection error in Main port

- 1 -- 2 -- 3 -

25% capacity indictor LED flashing

50% capacity indictor LED flashing

75% capacity indictor LED flashing

Capacity<25%

100% capacity indictor LED flashing

TROUBLESHOOTING

Product specificaties