SkyRC SK-100013 Handleiding

SkyRC Batterij-oplader SK-100013

Lees hieronder de 📖 handleiding in het Nederlandse voor SkyRC SK-100013 (28 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

Professional Balance Charger Discharger /

Built In AC Power Supply-

INSTRUCTION MANUAL

TABLE OF CONTENTS

INTRODUCTION......................................................................................

SPECIAL FEATURES.............................................................................

WARNING AND SAFETY NOTES.........................................................

PROGRAM FLOW CHART......................................................................

LITHIUM BATTERY(LIPO/LILO/LIFE)PROGRAM...................................

Charging Lithium battery at balance mode................................................

Charging of Lithium Battery.......................................................................

‘FAST' charging of Lithium battery.............................................................

'STORAGE' control of lithium battery.........................................................

Discharging Lithium battery.......................................................................

Pb( lead-sulphuric acid) battery program................................................

Charging of Pb battery.............................................................................

Discharging of Pb battery...........................................................................

NIMH/NICD BATTERY PROGRAM.........................................................

Charging of NiCd/NiMH battery..................................................................

Charging NiCd/NiMH battery in the AUTO charge mode...........................

Discharging of NiCd/NiMH battery..............................................................

Charging NiCd/NiMH Battery In Re-Peak Charge Mode............................

Charge/discharge & discharge/charge cycle of NiMH/NiCd battery...........

BATTERY MEMORY SET........................................................................

PROGRAM SET UP.................................................................................

LITHIUM BATTERY METER.....................................................................

VARIOUS INFORMATION DURING THE PROCESS..............................

WARNING AND ERROR MESSAGE.....................................................

SPECIFICATION......................................................................................

RECOMMENDED ACCESSORIES.........................................................

CONFORMITY DECLARATION..............................................................

WARRANTY AND SERVICE..................................................................

INTRODUCTION

Congratulations on your choice of the SKYRC QUATTRO B6AC digital intelligent charger from

SKYRC Technology Co., Ltd. You are now the owner of a compact charger with battery

management and integral balancer.

The unit is simple to use, but the operation of a sophisticated automatic charger such as

the SKYRC QUATTRO B6AC does require some knowledge on the part of the user.

These operating instructions are designed to ensure that you quickly become familiar

with its functions.

It is therefore important that you read right through the Operating Instructions, Warning

and Safety Notes before you attempt to use your new automatic charger for the first time.

We hope you have many years of pleasure and success with your new battery charger.

SKYRC QUATTRO B6AC is a high performance micro processor control charge/discharge - ,

station with battery management suitable for use with all current battery types. With integral

equalizer for six cell Lithium Ion LiIon Lithium Polymer LiPo and Lithium-Ferrum (LiFe) - - ( ), - ( )

batteries.

Maximum 6A charge current can be powered by a 12 Volt car battery or from 100V-240V via the ;

built in switch-mode power supply.

And the circuit features four totally independent identical power outputs which are powered 50

watts each. Total powers are 200 watts. As a result , it can charge or discharge up to 4 x 15 cells

of NiCd/NiMH or 4 x 6 series of Lithium batteries simultaneously. Quattro B6AC has four

individual cell voltage balancer at each outputs, so it does not required any balancer separately

when charging Lithium Battery LiPo LiIon LiFe for voltage balancing ( / / ) .

When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak

method. Lithium and lead (Pb) batteries are charged using the CC-CV method.

The fan cooling system is so smart and efficient. The fan speed is controlled by

internal temperature sensor.

Following instructions only apply to one of the four chargers, as all of them operate

according to same principle.

Please BE SURE to read these instructions and Warning and Safety Notes before you

use the charger for the first time.

It can be dangerous to mis-handle batteries and battery chargers, as there is always a

risk of batteries catching fire and exploding.

This charger is designed and approved exclusively for use with the types of battery

stated in these Instruction Manual. SKYRC accepts no liablility of any kind if the charger

is used for any purpose other than that stated. We are unable to ensure that you follow

the instructions supplied with the charger, and we have no control over the methods you

employ for using, operating and maintaining the device. For this reason we are obliged

to deny all liability for loss, damage or costs which are incurred due to the incompetent

or incorrect use and operation of our products, or which are connected with such

operation in any way. Unless otherwise prescribed by law, our obligation to pay

compensation, regardless of the legal argument employed, is limited to the invoice value

of those SKYRC products which were immediately and directly involved in the event in

which the damage occurred.

Liability Exclusion

Product specificaties

Merk:	SkyRC
Categorie:	Batterij-oplader
Model:	SK-100013
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	1730 g
Breedte:	170 mm
Hoogte:	66 mm
Soort:	Batterijlader voor binnengebruik
Ondersteund aantal accu's/batterijen:	4
DC voltage input:	12 - 18 V
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	110-240 V
Lengte:	225 mm
Oplaadspanning:	2 - 20 V
Frequentie:	- Hz
Compatibele batterij technologiën:	Lithium Iron Phosphate (LiFePo4),Lithium Polymer (LiPo),Lithium-Ion (Li-Ion)
Aantal batterijcellen:	15
Oplaadstroom:	6 A