Nitecore MH12GT Handleiding

Nitecore Zaklamp MH12GT

Lees hieronder de 📖 handleiding in het Nederlandse voor Nitecore MH12GT (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

The All-Round Flashlight Expert

MH12GT

User Manual

Features

• Utilizes a CREE XP-L HI V3 LED

• Maximum output of up to 1000 lumens

• Boasts a peak beam intensity of 25,700cd and a throw distance of up to 320 meters

•Integrated“PrecisionDigitalOpticsTechnology”providesextremereectorperformance

•Higheciencyconstantcurrentcircuitboardprovidesmaxruntimeof520hours

•Asideswitchdesignoersaccessto4brightnesslevelsand3specialmodes,idealforoutdoor

applications

• Integrated power indicator beneath the side switch displays remaining battery power(patented

No. ZL201220057767.4 )

• Power indicator can also report battery voltage to the nearest 0.1V

• A Built-in charging module charges Li-ion batteries rapidly through a micro USB port

•IncludesaNitecore18650battery(NL18343400mAh)

• Features intelligent memory function (except for SOS and location beacon modes)

• Reverse polarity protection prevents damage from incorrectly inserted batteries

•Toughenedultra-clearmineralglasswithanti-reectivecoating

•ConstructedfromaerogradealuminumalloywithHAIIImilitarygradehard-anodizednish

• Waterproof in accordance to IPX-8 (two meters submersible)

• Impact resistant to 1.5 meters

• Tail stand capability

Dimensions

Length: 139.2mm(5.48”)

HeadDiameter: 25.4mm(1”)

TailDiameter: 25.4mm(1”)

Weight: 87g (3.07oz)

Accessories

Nitecore18650battery(NL18343400mAh),USBchargingcable,holster,clip,tacticalring,

lanyard, spare rubber cover, spare O-ring, spare USB port cover

Battery Options

SIZE Nominal voltage Compatible

18650 Rechargeable

Li-ion battery 18650 3.7V Yes (Recommended and can

be recharged)

Primary Lithium

battery CR123 3V Yes (Compatible but can NOT

be recharged)

Rechargeable Li-ion

battery RCR123 3.7V Yes (Compatible but can NOT

be recharged)

* Charge 18650 rechargeable Li-ion batteries only. Do not charge CR123 or RCR123 Warning:

batteries.

Output & Runtime

FL1 STANDARD HIGH MID ULTRALOWLOW

1000

LUMENS

280

LUMENS

LUMEN

1X18650 *1h15min 6h 28h 520h

2XCR123 *1h 3h15min 20h 300h

320m (Beam Distance)

25700cd (Peak Beam Intensity)

1.5m

IPX8, 2m ( Waterproof AND Submersible)

NOTE: Theabovedatahasbeenmeasuredinaccordancewiththeinternationalashlight

testingstandardsANSI/NEMAFL1,using1xNitecore18650battery(3.7V,3400mAh)or2xCR123

batteries (3V, 1700mAh) under laboratory conditions. The data may vary in real-world use due

todierentbatteryuseorenvironmentalconditions.

*Runtime for High Mode is calculated based on theoretical arithmetic.

Operating Instructions

Battery Installation

Insert one 18650 battery or two CR123 batteries as illustrated.

WARNING

1. Ensure batteries are inserted with the positive (+) end pointing

to the head. The MH12GT will not operate with incorrectly inserted

batteries.

2. Avoid direct eye exposure to the beams.

Momentary illumination

Pressthetailcapswitchhalfwaytoswitchthelighton.Simplyreleasetoswitchthelighto.

ON/OFF

To switch ON: Press the tail cap switch all the way down until a “click” is heard

To switch OFF: Press the tail cap switch all the way down again until a “click” is heard

Brightness Levels

With the light switched on, press the mode switch repeatedly to cycle through brightness levels

of ultra-low, low, medium and high.

Note: When in high output, the MH12GT will reduce output luminance automatically after 1

minute of use to prevent overheating and extend battery longevity.

ATR

With Advanced Temperature Regulation module, the MH12GT regulates its output and adapts to

the ambient environment, maintaining optimal performance.

Special Modes (Strobe/SOS/Location Beacon)

When the light is on, press and hold the mode switch for over one second to enter strobe

mode; when in strobe mode, press and hold the mode switch for over one second again to cycle

through SOS, location beacon and strobe modes. To exit and revert to the brightness level last

used, simply press the mode switch.

Note: The MH12GT memorizes its previously brightness level as well as strobe mode the next

time it is turned on. (Except for SOS and Location Beacon modes)

Charging Function

The MH12GT can charge an 18650 Li-ion battery with the included USB charging cable by

following the steps below.

1. Click the tail switch to turn on the light.

2. Connect the USB cable to the MH12GT's charging port and a power source (USB chargers, PC

or other power terminals) as shown in the adjacent image.

Fully charging a depleted 18650 battery takes approximately 6 hours.

Undernormalchargingconditions,thebluepowerindicatorlightwillashoncepersecond.

If CR123/RCR123s are inserted, or there is no battery inserted, or the tail switch is not at the “on”

position,thebluepowerindicatorlightwillashrapidlytonotifyusers.

When charging is complete, the MH12GT will terminate the charging process automatically and

the blue power indicator goes out.

Power Tips

1. When the light is on, the power indicator will blink once every two seconds when power level

drops to 50%; the power indicator will blink quickly when power level is low.

2.Whenthelightiso,presstailcapswitchwhileholdingdownthemodeswitchtoactivate

the power indicator light to report battery voltage (accurate to ±0.1V). For example, when the

batteryvoltageisatamaximumchargeof4.2V,thepowerindicatorwillblink4times,followed

by a one second pause and 2 more blinks before entering the previously used brightness.

Dierentvoltagesrepresentthecorrespondingremainingbatterypowerlevels:

1×18650 battery:

2×CR123 batteries:

Changing Batteries

Batteries should be recharged or replaced if any of the followings occurs: The power indicator

blinksrapidly;outputappearstobedimortheashlightbecomesunresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-

based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. DOA/defective products can be exchanged

for replacement through a local distributor/dealer within the 15 days of purchase.

After 15 days, all defective / malfunctioning NITECORE ® products will be repaired free

of charge for a period of 60 months from the date of purchase. After 60 months, a limited

warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or

replacementparts.Thewarrantyisnulliedinallofthefollowingsituations:

1.Theproduct(s)is/arebrokendown,reconstructedand/ormodiedbyunauthorizedparties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact your national

NITECORE® distributor or send an email to service@nitecore.com

TheNitecoreocialwebsiteshallprevailincaseofanyproductdatachanges.

Low power Full power

3.5V 3.7V 3.9V 4.2V

Low power Full power

4.8V 5.6V 6.0V 6.4V

Pleasendusonfacebook:NitecoreFlashlight

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,

Guangzhou,510623, Guangdong, China

Thanks for purchasing NITECORE!

20170412

Product specificaties

Merk:	Nitecore
Categorie:	Zaklamp
Model:	MH12GT
Kleur van het product:	Zwart
Gewicht:	87 g
Breedte:	139.2 mm
Aantal lampen:	1 lampen
Soort lamp:	LED
LED-type:	CREE XP-L HI V3
Levensduur accu/batterij:	520 uur
Lichtstroom:	1000 lm
Kleur licht:	Wit
Lichtintensiteit:	25700 cd
Type batterij:	18650/CR123
Type zaklamp:	Zaklamp
Lichtbundelafstand (max):	320 m
Knipperlichtstanden:	SOS mode, Strobe mode
Diameter hoofd:	25.4 mm