Princeton Tec Torrent 500 Handleiding

Bekijk gratis de handleiding van Princeton Tec Torrent 500 (2 pagina’s), behorend tot de categorie Zaklamp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.0 sterren uit 8 reviews. Heb je een vraag over Princeton Tec Torrent 500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Switch Operation

– See Battery Installation Diagram

Unlock the safety lock by sliding the lock

button forward. Rotate the switch to the off

position and pull the switch lock back to lock

the switch and prevent accidental activation

while in transit.

O-Ring and Lens Cap

Occasionally clean and lightly lubricate the

O-ring and Lens Cap threads. Use only

silicone grease, never use aerosol spray

lubricants. Certain types of aerosol sprays

can cause damage the plastic and void the

warranty.

General Maintenance

As with any outdoor equipment, the light

should be kept clean with mild soap and water.

Avoid getting dirt on the o-ring and in the

threads of the lens cap. If this should occur,

take the light apart, remove the

o-ring, light module and batteries, then clean

the light body, lens and o ring re-lubricate the

o-ring and reassemble the light.

Troubleshooting

If the Torrent fails to light:

• Check the batteries for proper installation.

• Replace batteries if proper installation is

conrmed.

• Check the light for water contamination

The light will resume normal operation

once the water is shaken or blown out and

the light is left open until completely dry. If

the light has been contaminated with salt

water, ush the unit with fresh water and

dry as described above.

USA Lifetime – International

10 Year Warranty

WARRANTY – Princeton Tec warrants

this product to be free from defects in

workmanship and materials under normal

use for as long as you own this product.

This warranty covers all of the component

parts of the product except batteries. This

warranty does not cover deterioration

due to normal wear or damage due to

misuse, alteration, negligence, accidents,

or unauthorized repair. Princeton Tec will

repair or replace parts which are defective

in workmanship or materials.

Your authorized Princeton Tec Dealer

and Princeton Tec are the only facilities

authorized to repair the product. After

(3) unsuccessful attempts (within the

warranty period) to repair the product, you

have the right to elect replacement of the

product or a refund of the purchase price

less allowance for use of the product.

NO INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARE INCLUDED IN THIS

WARRANTY. (Some states do not allow

the exclusion or limitation of incidental

or consequential damages, so the above

limitations or exclusions may not apply to

you.) This warranty gives you specific legal

rights, and you may also have other rights

which vary from state to state.

Princeton Tec reserves the right to

change product specifications without

notice.

FOR CALIFORNIA RESIDENTS

WARNING: This product contains Bisphenol

A (BpA) a chemical known to the State of

California to cause birth defects or other

reproductive harm.

Return Policy

If your light fails to operate, follow these simple

steps:

1. Check batteries. Replace if necessary.

2. Contact Princeton Tec customer service at

800-257-9080 to request an RMA number to

send your light in for repair or replacement.

No warranty repairs will be accepted without

an RMA number.

3. Return the light without batteries to:

Princeton Tec, PO Box 8057 Trenton NJ

08650. Postage due and freight collect

items will not be accepted.

4. Upon receipt your light will be

processed in about two weeks.

Please allow additional time for return

transportation from New Jersey

Princeton Tec

PO Box 8057,

Trenton, NJ 08650

Phone: 609-298-9331

Fax: 609-298-9601

www.princetontec.com

© 2020 Princeton Tec

TORRENT

®

LED FLASHLIGHT

Operating and Maintenance

Instructions

Notice d’utilisation et d’entretien

Bedienungs- und Wartungsanleitung

www.princetontec.com

ENGLISH

Battery Installation

– See Battery Installation Diagram

8 AA

Alkaline (LR03) or Lithium

Rechargeable NiCad or NiMH

LEDs require proper battery polarity to

function. if the unit fails to operate, rotate

the reector assembly 180º. For best

performance, use alkaline AA-cells, Carbon

zinc and Nicad may be used but will result in

reduced brightness and burn time.

Princeton Tec cares about the environment

and recommends recycling batteries. For

more information about battery recycling,

please go to www.batteryrecycling.com.

WARNING !

• Never mix fresh and used batteries.

• Never mix different battery brands or

chemistry types.

• Always remove drained batteries immediately.

• Remove batteries during long periods of

storage.

NOTE : Lithium batteries offer extended

constant brightness time, extreme cold

weather performance, and lighter weight.

Rechargeable NiCad or NiMH batteries may

result in reduced brightness due to

lower nominal voltage. The Torrent LED

battery compartment has a waterproof seal. It

is important to keep these o-ring

seals free from dirt, away from harsh

chemicals, and lightly lubricated with silicone

grease. Never use aerosol spray lubricants as

certain forms of aerosol

sprays can cause damage to the plastic parts

and void the warranty. Inspect the seals every

time the batteries are changed.

NOTE: Some battery types can emit

hydrogen gas, which can create an explosion

potential in sealed devices if it is not vented or

removed. The Torrent LED

is equipped with a platinum catalyst to remove

this gas. Upon severe impact, the catalyst

could fracture. If you notice a rattling sound

in the light or gray particles in the battery

compartment, do not use the

light. See the warranty and return policy for

more information.

0420

Figure 2 – Battery Replacement Remplacement des piles Betriebsartenschalter

Figure 1 – Switch Operation Opération de commutation Schalterbetätigung

Burntime is the duration of time that the light is producing 10% or more of it’s rated initial output value.

Reserve Timeis the duration of time that the light is producing more than 0.25lux at a distance of 2 meters.

Burntime

(durée de vie utile) est la durée pendant laquelle la lampe produit 10 % ou plus de sa valeur nominale de sortie initiale.

Reserve(temps de réserve) est la durée pendant laquelle la lampe produit plus de 0,25 lux à une distance de 2 mètres.

Die Leuchtdauerist die Zeitspanne, die die Lampe 10 % oder mehr ihrer anfänglichen Nennausgangsleistung liefert.

Die Reservedauerist die Zeitspanne, die die Lampe mehr als 0,25 Lux in einem Abstand von 2 Metern erzeugt.

1

4

2

5

3

ModesRuntimeBeam PatternReserve

SPOT HIGH

1.5h

140h

DISTANCE (m) 0 75 150

Forward=Unlock

Over=On

Product specificaties