Princeton Tec Byte Tactical Handleiding

Bekijk gratis de handleiding van Princeton Tec Byte Tactical (3 pagina’s), behorend tot de categorie Zaklamp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.2 sterren uit 8 reviews. Heb je een vraag over Princeton Tec Byte Tactical of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Figure 1 – Battery Replacement

Figure 2 - Switch Operation

Press 1x:

Red 25%

Press 1x:

White Spot 100%

Press 2x:

Red 100%

Hold:

White Spot 25%

Press 1x from On:

Off

Figure 3 – Performance

ModesLumensRuntimeBeam PatternReserve

HIGH SPOT2003.4h

55h

LOW SPOT5012h61h

RED HIGH366h2h

RED LOW1140h10H

DISTANCE (m) 0 1 3 23 39

(ANSI FL-1 Standard)

Runtime is defined as the duration of time from the initial light output value—defined as 30 seconds after the

point the device is first turned on—using fresh batteries, until the light output reaches 10% of the initial value.

Reserve time is the duration of time from 10% of initial light output value down to 0.25 lux

USA– International 5-Year Warranty

WARRANTY – Princeton Tec warrants this

product to be free from defects in workmanship

and materials under normal use for 5 years. This

warranty covers all of the component parts of

the product except batteries. This warranty does

not cover deterioration due to normal wear or

damage due to misuse, alteration, negligence,

accidents, or unauthorized repair. Princeton Tec

will repair or replace parts which are defective in

workmanship or materials.

Your authorized Princeton Tec Dealer and

Princeton Tec are the only facilities authorized

to repair the product. After (3) unsuccessful

attempts (within the warranty period) to repair the

product, you have the right to elect replacement

of the product or a refund of the purchase price

less allowance for use of the product. NO

INCIDENTAL OR CONSEQUENTIAL DAMAGES

ARE INCLUDED IN THIS WARRANTY. (Some

states do not allow the exclusion or limitation

of incidental or consequential damages, so the

above limitations or exclusions may not apply

to you.) This warranty gives you specific legal

rights, and you may also have other rights which

vary from state to state.

Princeton Tec reserves the right to change

product specifications without notice.

FOR CALIFORNIA RESIDENTS:

WARNING: This product contains Bisphenol A

(BpA) a chemical known to the State of California

to cause birth defects or other reproductive harm.

Return Policy

If your light fails to operate, follow these

simple steps:

1. Check batteries. Replace if necessary.

2. To send your light in for repair or replacement,

first contact Princeton Tec customer service on

1-800-257-9080 to request an RMA number.

Please have your light model, date of purchase

and a brief description of the fault you are

experiencing. No warranty repairs will be

accepted without an RMA number.

3. Return the light without batteries to:

Princeton Tec, PO Box 8057 Trenton NJ

08650. Postage due and freight collect items

will not be accepted.

4. Upon receipt your light will be processed in

about two weeks. Please allow additional time

for return transportation from NJ

Princeton Tec

PO Box 8057,

Trenton, NJ 08650

Phone: 609-298-9331

Fax: 609-298-9601

princetontec.com

© 2023 Princeton Tec

1234

0719

ENGLISH:

Battery Installation

– See Battery Installation Diagram

• 2 AAA

• Alkaline (LR03) or Lithium

• Rechargeable NiCad or NiMH

Princeton Tec cares about the environment

and recommends recycling batteries. For more

information about battery recycling, please go

to: www.batteryrecycling.com

To install the batteries, unlatch the battery door.

Open the Byte case by popping the door latch

over the catch and rotate the door open.

Install two AAA batteries as shown in the

diagram. The tall spring on the battery door

should correspond with the negative polarity

and the shorter spring on the battery door should

correspond with the positive polarity. Observe

proper battery polarity when installing the

batteries. Improper installation of the batteries

will damage the light and void the warranty.

Rotate the door to the closed position, squeeze

the body between your forefingers and thumb

to snap the door latch over the catch.

WARNING

!

• Never mix fresh and used batteries.

• Never mix different battery brands or

chemistry types.

• Always remove drained batteries immediately.

• Remove batteries during long periods of

storage.

NOTE: Rechargeable NiCad or NiMH batteries

may result in reduced brightness due to lower

nominal voltage.

Switch Operation

– See Switch Operation diagram

Troubleshooting

If the Byte fails to light: .

• Check the batteries for proper installation.

• Replace batteries if proper installation is

confirmed.

• Check the light for water contamination.

The light will resume normal operation

once the water is shaken or blown out and

the light is left open until completely dry. If

the light has been contaminated with salt

water, flush the unit with fresh water and

dry as described above.

BYTE TACTICAL

LED HEADLAMP

Operating and Maintenance Instructions

0719

0719

Product specificaties