HANNLOMAX HX-300CD Handleiding
HANNLOMAX
Wekkerradio
HX-300CD
Bekijk gratis de handleiding van HANNLOMAX HX-300CD (6 pagina’s), behorend tot de categorie Wekkerradio. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.8 sterren uit 3.5 reviews. Heb je een vraag over HANNLOMAX HX-300CD of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
CD Alarm Clock Radio
With USB Ports for Charging
Model : HX-300CD
INSTRUCTION MANUAL
Note: Please read and follow these instructions before operating your unit.
SAFETY INSTRUCTION
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND
THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON
APPARATUS.
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
“dangerous voltage” within
the products enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
CAUTION
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning: To reduce the rise of
electric shock, do not remove
cover (or back) no
user-serviceable parts inside.
Refer servicing to qualified service
personnel.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
-1 -
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Grounding or Polarization – This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
16. Alternate Warnings – This product is equipped with a three-wire ground-type plug, a
plug having a third (grounding) pin. This plug will only into a grounding-type power
outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
17. Ventilation – Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
18. The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
19. 回: CLASS II apparatus with double insulation, and no protective earth provided.
20. Caution Marking and rating plate was located at bottom enclosure of the apparatus.
21. WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
22. The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
23. The mains plug is used as disconnect device. The mains plug of apparatus should
not be obstructed OR should be easily accessed during intended use. To be
completely disconnect the power input, the mains plug or apparatus shall be
disconnected from the mains.
- 2 -
24. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
25. Excessive sound pressure from earphones and headphone can cause hearing loss.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is needed.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
- 3 -
LOCATION OF CONTROLS
1 CD Compartment 16 FM Wire Antenna
2 TIME Button 17 AUX-IN Jack
3 REPEAT Button 18 Back-up Battery Compartment
4 AL1 Button (ALARM 1) 19 LED Display
5 AL2 Button (ALARM 2) 20 PM Indicator
6
/M+ Button
21 AL1-Buzz Indicator
7
/ TIME ZONE Button 22 AL1-Music Indicator
8
VOL+ Button
23 REP Indicator
9
VOL− Button
24 AL2-Buzz Indicator
10
TUNE/SKIP+ Button
25 AL2-Music Indicator
11
TUNE/SKIP− Button
26 USB charging port (1A)
12 SOURCE/AL OFF Button 27 USB charging port (2.1A)
13 SNOOZE/SLEEP/DIMMER Button
14 PROG/MEM Button
15 DC Jack
- 4 -
CONNECTING THE UNIT TO POWER
AC OPERATION
Plug one end of the AC adaptor into the DC power Input, and then plug the other end
into AC wall outlet. Before switching on the unit, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate.
BACK-UP BATTERY
The unit has pre-installed a CR-2032 lithium battery inside the back-up battery
compartment. In case of power failure or interrupted AC power, the current time, alarm
time and the stored radio stations are preserved in the memory of the unit by means of
battery back-up function.
OPERATE THE CLOCK
When the clock is plugged in, the correct time will be displayed after a few seconds.
(Note : The default Time Zone is set on Zone 2 - Eastern Time). The clock will
automatically indicate the AM or PM time. When the PM indicator is on, the time display
is PM.
SELECT THE TIME ZONE
There are 7 time zones programmed as follows:
ZONE 1 – Atlantic Time
ZONE 2 – Eastern Time (Default Setting)
ZONE 3 – Central Time
ZONE 4 – Mountain Time
ZONE 5 – Pacific Time
ZONE 6 – Yukon Time
ZONE 7 – Hawaiian Time
CHANGE THE TIME ZONE
Make sure that the unit is in CLOCK mode. To confirm, Press and hold the SOURCE/AL
OFF button for one second until “OFF” appears on the display.
While the unit is in CLOCK mode, press the TIME ZONE button, the display will show the
current time zone number.
Press the
TIME ZONE button repeatedly to select your time zone. When the desire time
zone is selected, release the button, the time zone will store in the memory after 1-2
seconds.
When you moved to a different time zone, simply change the time zone to the new time
zone, the unit will store the new time zone in the memory.
- 5 -
Product specificaties
| Merk: | HANNLOMAX |
| Categorie: | Wekkerradio |
| Model: | HX-300CD |
Heb je hulp nodig?
Als je hulp nodig hebt met HANNLOMAX HX-300CD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Wekkerradio HANNLOMAX
18 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
Handleiding Wekkerradio
- Lexibook
- Grundig
- Watshome
- Renkforce
- AEG
- AXIL
- Bresser
- Trevi
- Oregon Scientific
- Mitsai
- OneConcept
- Hamilton Beach
- YONO
- Terris
- Elta
Nieuwste handleidingen voor Wekkerradio
17 Juni 2025
16 Juni 2025
15 Juni 2025
9 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025