HANNLOMAX HX-116CR Handleiding
HANNLOMAX
Wekkerradio
HX-116CR
Bekijk gratis de handleiding van HANNLOMAX HX-116CR (4 pagina’s), behorend tot de categorie Wekkerradio. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.5 sterren uit 3.5 reviews. Heb je een vraag over HANNLOMAX HX-116CR of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
PLL ALARM CLOCK RADIO
Model : HX-116CR
INSTRUCTION MANUAL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to the presence of
uninsulated “dangerous
voltage” within the
products enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
Warning: To reduce the rise of
electric shock, do not remove
cover (or back) no
user-serviceable parts inside.
Refer servicing to qualified
service personnel.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
2) Unplug the apparatus during lightning storms or when unused for long periods of time.
3) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
FCC NOTICE
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
-1-
QUICK REFERENCE
1. SPEAKER
2. SOURCE / AL. OFF
Use this button to select AM or FM band.
Use this button to turn the ALARM off after Alarm activates.
3. TIME / M+ / MEM
In CLOCK mode, use this button to set the clock
In RADIO mode, use this button to store radio stations in the memory.
In RADIO mode, use this button to select the stored radio stations in the memory.
4. AL2 / VOL-
In CLOCK mode, use this button to set the alarm time in ALARM 2.
In RADIO mode, use this button to decrease the volume.
5. AL1 / VOL+
In CLOCK mode, use this button to set the alarm time in ALARM1.
In RADIO mode, use this button to increase the volume.
6. MIN /
In CLOCK mode, use this button to adjust the minute in CLOCK or ALARM time.
In RADIO mode, use this button to search the radio station in backward direction.
7. HR /
In CLOCK mode, use this button to adjust the hour in CLOCK or ALARM time.
In RADIO mode, use this button to search the radio station in forward direction.
8. SNOOZE / SLEEP
In ALARM mode, use this button to temporarily suspend the ALARM for a short period.
In RADIO mode, use this button to set the sleep time.
9. LED DISPLAY
10. PM INDICATOR
11. AL1-B INDICATOR (This indicator shows that the unit is in ALARM-1 buzzer mode.)
12. AL1-R INDICATOR (This indicator shows that the unit is in ALARM-1 radio mode.)
13. AL2-B INDICATOR (This indicator shows that the unit is in ALARM-2 buzzer mode.)
14. AL2-R INDICATOR (This indicator shows that the unit is in ALARM-2 radio mode. )
15. BATTERY COMPARTMENT (Compartment for the back-up battery.)
16. FM WIRE ANTENNA(Extent this wire antenna to obtain better FM broadcasting.)
17. DC JACK (Connect the unit to the AC/DC adaptor.)
-2-
CONNECTING THE UNIT TO POWER
Before plug in the AC power cord to the AC wall outlet, please make sure that the voltage of your electricity
supply is same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries (not supplied) into the battery compartment. Be sure to observe the
proper polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the stored radio
stations are preserved in the memory of the unit by means of battery back-up function.
SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the TIME button for about 1 second, the time will begin
to flash on the LED display.
2. Press the HR button to adjust the hour.
3. Press the MIN button to adjust the minute.
4. When the correct time is selected, press the TIME button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press the AL1 or AL2 button. The ALARM time will begin to flash on the
LED display.
2. Press the HR button to adjust the alarm hour.
3. Press the MIN button to adjust the alarm minute.
4. When the correct time is selected, press the AL1 or AL2 button to confirm.
5. Press the AL1 or AL2 to select the ALARM sound mode - buzzer or currently set radio station. The
alarm buzzer or radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
minutes by pressing the SNOOZE button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM WHEN ALARM ACTIVATE
When the Alarm activate, press the SOURCE/AL.OFF button to turn off the Alarm.
TURN OFF THE ALARM
When you don’t need the alarm, press the AL1/+ or AL2/− button until both the correspondence indicator
(buzzer and radio) turned off.
-3-
Product specificaties
| Merk: | HANNLOMAX |
| Categorie: | Wekkerradio |
| Model: | HX-116CR |
Heb je hulp nodig?
Als je hulp nodig hebt met HANNLOMAX HX-116CR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Wekkerradio HANNLOMAX
18 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
Handleiding Wekkerradio
- QFX
- Daewoo
- Nikkei
- NGS
- Lanaform
- Trust
- New One
- Balance
- Magnasonic
- Metronic
- Brandt
- Homedics
- Memorex
- Camry
- Technika
Nieuwste handleidingen voor Wekkerradio
17 Juni 2025
16 Juni 2025
15 Juni 2025
9 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025