Axxess AXDCT-2 Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Axxess AXDCT-2 gratis online of download de PDF. 8 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
AXDCT-2AXDCT-2
INSTALLATION INSTRUCTIONSINSTALLATIONINSTRUCTIONS
AXDCT-2AXDCT-2
INSTALLATIONINSTRUCTIONSINSTALLATIONINSTRUCTIONS
REV. 3/2/20REV. 3/2/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com
REV. 3/2/20REV. 3/2/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com
The AXDCT-2 should be installed on a stereo’s speaker output wires or the
output wires on an factory amplifier of up to 80 watts per channel. These
wires can be found behind the stereo in the dash, on the outside of an factory
amplifier, or on the input terminals on the factory speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car
stereo applications as follows:
Yellow - Battery +12v input †
Black - Ground input †
Blue - Remote +12v output †
† These wires can be connected directly to the amplifier being installed.
Wires only required if a 12v amp turn-on is desired.
White - Left front (+) input
White/Black - Left front (-) input
Gray - Right front (+) input
Gray/Black - Right front (-) input
Black/White - Reference ground (-)
(Reference ground optional if noise is present)
Note: Be sure that all audio input connections are polarized or in phase with
each other. That is, the positive output wires from the audio source need to be
connected to the corresponding positive input wires of the AXDCT-2. The same
goes for the negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
The AXDCT-2 should be installed on a stereo’s speaker output wires or the
output wires on an factory amplifier of up to 80 watts per channel. These
wires can be found behind the stereo in the dash, on the outside of an factory
amplifier, or on the input terminals on the factory speakers.
Wire Color & Function:The audio input wire colors are an EIA standard for car
stereo applications as follows:
Yellow- Battery +12v input †
Black- Ground input †
Blue- Remote +12v output †
† These wires can be connected directly to the amplifier being installed.
Wires only required if a 12v amp turn-on is desired.
White- Left front (+) input
White/Black- Left front (-) input
Gray- Right front (+) input
Gray/Black- Right front (-) input
Black/White- Reference ground (-)
(Reference ground optional if noise is present)
Note: Be sure that all audio input connections are polarized or in phase with
each other. That is, the positive output wires from the audio source need to be
connected to the corresponding positive input wires of the AXDCT-2. The same
goes for the negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
The AXDCT-2 should be installed on a stereo’s speaker output wires or the
output wires on an factory amplifier of up to 80 watts per channel. These
wires can be found behind the stereo in the dash, on the outside of an factory
amplifier, or on the input terminals on the factory speakers.
Wire Color & Function:The audio input wire colors are an EIA standard for car
stereo applications as follows:
Yellow- Battery +12v input †
Black- Ground input †
Blue- Remote +12v output †
† These wires can be connected directly to the amplifier being installed.
Wires only required if a 12v amp turn-on is desired.
White- Left front (+) input
White/Black- Left front (-) input
Gray- Right front (+) input
Gray/Black- Right front (-) input
Black/White- Reference ground (-)
(Reference ground optional if noise is present)
Note: Be sure that all audio input connections are polarized or in phase with
each other. That is, the positive output wires from the audio source need to be
connected to the corresponding positive input wires of the AXDCT-2. The same
goes for the negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
The AXDCT-2 should be installed on a stereo’s speaker output wires or the
output wires on an factory amplifier of up to 80 watts per channel. These
wires can be found behind the stereo in the dash, on the outside of an factory
amplifier, or on the input terminals on the factory speakers.
Wire Color & Function:The audio input wire colors are an EIA standard for car
stereo applications as follows:
Yellow- Battery +12v input †
Black- Ground input †
Blue- Remote +12v output †
† These wires can be connected directly to the amplifier being installed.
Wires only required if a 12v amp turn-on is desired.
White- Left front (+) input
White/Black- Left front (-) input
Gray- Right front (+) input
Gray/Black- Right front (-) input
Black/White- Reference ground (-)
(Reference ground optional if noise is present)
Note: Be sure that all audio input connections are polarized or in phase with
each other. That is, the positive output wires from the audio source need to be
connected to the corresponding positive input wires of the AXDCT-2. The same
goes for the negative audio wires. Failure to do this will result in poor bass
response and low quality audio.
Product specificaties
| Merk: | Axxess |
| Categorie: | Niet gecategoriseerd |
| Model: | AXDCT-2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Axxess AXDCT-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Axxess
Axxess AXGLI-R Handleiding Axxess AXDIS-GMLN9BT Handleiding Axxess AXLOC-55SP Handleiding Axxess AXGM-17 Handleiding Axxess AXBT-MZ2 Handleiding Axxess AXAC-CH8 Handleiding Axxess AXVRI Handleiding Axxess AXLOC-150A Handleiding