Audio-Technica AT-LP60xBTB Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT-LP60xBTB (15 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
AT-LP 60XBT
User Manual
Automatic Wireless Turntable
AT-LP60XBT
1
Introduction
Thank you for purchasing this Audio-Technica product.
Read through this user manual before using the product to ensure its correct use. Also, keep this manual for future reference.
This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC
adapter of the product are correct for the country you live in.
Package contents
Make sure that you have all the included items listed below before using this product.
If some items are missing or damaged, contact your local Audio-Technica dealer.
• Turntable body • Felt mat • Platter (with drive belt)
• AC adapter (approx. 1.5 m (4.9'))
• Quick start guide
• Caution guide
• 45 RPM adapter • RCA audio cable
(approx. 1.2 m (3.9'))
After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.
2
Safety precautions
Although this product was designed to be used safely, failing
to use it correctly may result in an accident. To ensure safety,
observe all warnings and cautions while using the product.
Important information
Warning:
To prevent fire or shock hazard, do not expose this apparatus
to rain or moisture.
Caution:
• Do not expose this apparatus to drips or splashes.
• To avoid electric shock, do not open the cabinet.
• Refer servicing to qualified personnel only.
• Do not expose this apparatus to excessive heat such as
sunshine, fire or the like.
• Do not subject this apparatus to strong impact.
• This apparatus should be located close enough to the AC
outlet so that you can easily grasp the AC adapter at any time.
• In case of emergency, disconnect the AC adapter quickly.
• Do not place any objects filled with liquids, such as vases, on
this apparatus.
• To prevent fire, do not place any naked flame sources (such
as lighted candles) on this apparatus.
• Do not install this apparatus in a confined space such as a
bookcase or similar unit.
•
Install this apparatus only in the place where ventilation is good.
For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Caution:
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
Safety precautions
RF Exposure Statement:
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter used in other
systems. This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines. This equipment
has very low levels of RF energy that it deemed to comply
without maximum permissive exposure evaluation (MPE). But it
is desirable that it should be installed and operated keeping the
radiator at least 20 cm or more away from person’s body.
For customers in Canada
IC statement:
CAN ICES-3 (B)/NMB-3(B)
This device complies with INDUSTRY CANADA R.S.S. 247.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
which may cause undesired operation. Under Industry Canada
regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful
communication. This equipment should be installed and
operated with minimum distance 20 cm between the radiator &
your body.
Notes on use
Turntable body
• Do not set and use the product in locations that are
considerably hot or humid, dirty, or subject to extreme
vibrations.
• The product should be positioned on a flat, level surface.
• When closing the dust cover, close it completely. Do not open
the dust cover during playback.
• Read the user manual for the Bluetooth receiver device.
Cartridge
• Attach the provided protector to the cartridge when the
product is not in use.
• Do not touch the stylus of the cartridge with your finger.
• Do not allow the stylus to bump against the platter, felt mat,
or edge of the record.


Product specificaties

Merk: Audio-Technica
Categorie: Platenspeler
Model: AT-LP60xBTB
Kleur van het product: Black, Brown
Gewicht: 2600 g
Breedte: 359.5 mm
Diepte: 373.3 mm
Hoogte: 97.5 mm
Soort: Draaitafel met riemaandrijving
AC-adapterfrequentie: 60/50 Hz
AC-adapter ingangsspanning: 115/230 V
Bluetooth: Ja
Bluetooth-versie: 5.0
Bluetooth-profielen: A2DP, SBC
Meegeleverde kabels: RCA
Soort voeding: AC
Signaal/ruis-verhouding: 50 dB
Bereik van Bluetooth: 10 m
Stroomverbruik (typisch): 3 W
Type motor: DC-servomotor
Werking: Volautomatisch
Inclusief stofhoes: Ja
Draaitafel snelheden: 33 1/3, 45 RPM
Draaiplateau materiaal: Aluminium
Snelheidsfluctuaties: 0.25 procent
45-toerenadapter: Ja
Ingebouwde phono-voorversterker: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT-LP60xBTB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Audio-Technica

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler