Audio-Technica AT-LP120XUSB Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT-LP120XUSB (20 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
AT-LP120XBT-USB
User Manual
Wireless Direct-Drive Turntable
1
Introduction
Thank you for purchasing this Audio-Technica product.
Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future
reference.
This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC adapter of the
product are correct for the country you live in.
Package contents
Make sure that you have all the included items listed below before using this product.
If some items are missing or damaged, contact your local Audio-Technica dealer.
• Turntable body Dust cover Felt mat• •
• Platter • Counterweight • Headshell (AT-HS6) with VM stereo
cartridge (AT-VM95E)
• • • 45 RPM adapter Stylus target light Dust cover hinges
• AC adapter (approx. 1.3 m (4.3'))
• Quick start guide
• Caution guide
• • USB cable (1.9 m (6.2')) RCA audio cable (approx. 1.4 m (4.6'))
After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.
2
Safety precautions
Although this product was designed to be used safely, failing to use
it correctly may result in an accident. To ensure safety, observe all
warnings and cautions while using the product.
Important information
Warning:
To prevent fire or shock hazard, do not expose this apparatus to rain or
moisture.
Caution:
• Do not expose this apparatus to drips or splashes.
• To avoid electric shock, do not open the cabinet.
• Refer servicing to qualified personnel only.
• Do not expose this apparatus to excessive heat such as sunshine, fire
or the like.
• Do not subject this apparatus to strong impact.
• This apparatus should be located close enough to the AC outlet so
that you can easily grasp the AC adapter at any time.
• In case of emergency, disconnect the AC adapter quickly.
• Do not place any objects filled with liquids, such as vases, on this
apparatus.
• To prevent fire, do not place any naked flame sources (such as
lighted candles) on this apparatus.
• Do not install this apparatus in a confined space such as a bookcase
or similar unit.
• Install this apparatus only in the place where ventilation is good.
For customers in the USA
FCC Notice
Warning:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution:
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Contact:
Responsible Company: Audio-Technica U.S., Inc.
Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
Tel: 330-686-2600
Safety precautions
RF Exposure Statement:
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter used in other systems. This
device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines. This equipment has very low levels of RF energy
that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and
operated keeping the radiator at least 20 cm or more away from
person’s body.
For customers in Canada
IC statement:
CAN ICES-3 (B)/NMB-3(B)
This device complies with INDUSTRY CANADA R.S.S. 247. Operation
is subject to the following conditions: (1) This device may not cause
harmful interference and (2) this device must accept any interference
received, including interference which may cause undesired operation.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful communication. This
equipment should be installed and operated with minimum distance 20
cm between the radiator & your body.
Notes on use
Turntable body
• Do not set and use the product in locations that are considerably hot
or humid, dirty, or subject to extreme vibrations.
• The product should be positioned on a flat, level surface.
• Read the user manual for the Bluetooth receiver device.
Cartridge
• Attach the protector to protect the stylus when the product is not in
use.
• Do not touch the stylus of the cartridge with your finger.
• Do not allow the cartridge's stylus to bump against the platter or the
edge of the record.


Product specificaties

Merk: Audio-Technica
Categorie: Platenspeler
Model: AT-LP120XUSB
Kleur van het product: Zilver
Gewicht: 8000 g
Breedte: 452 mm
Diepte: 352 mm
Hoogte: 141.6 mm
Soort: Draaitafel met riemaandrijving
Gebruikershandleiding: Ja
AC-adapterfrequentie: 50/60 Hz
AC-adapter ingangsspanning: 100 - 240 V
Meegeleverde kabels: RCA, USB
Volumeregeling: Draaiknop
Aantal USB-aansluitingen: 1
Vorm: S-vormige toonarm
Soort voeding: AC
Aantal: 1
AC-adapter, uitgangsspanning: 12 V
AC-adapter, uitgangsstroom: 3 A
Signaal/ruis-verhouding: 50 dB
Nominale snelheid: 33 1/3, 45, 78 RPM
Stroomverbruik (typisch): 2.75 W
Type motor: DC-servomotor
Werking: Handmatig
Draaitafel snelheden: 33 1/3, 45, 78 RPM
Draaiplateau materiaal: Aluminium
Snelheidsfluctuaties: 0.2 procent
45-toerenadapter: Ja
Uitgangsniveau: 240 mV
Ingebouwde phono-voorversterker: Ja
Toonregeling: Ja
Startmoment: 1 kg/cm

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT-LP120XUSB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Audio-Technica

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler