Ade Gravis-210504 Handleiding
Ade
Snijmachine
Gravis-210504
Bekijk gratis de handleiding van Ade Gravis-210504 (16 pagina’s), behorend tot de categorie Snijmachine. Deze gids werd als nuttig beoordeeld door 49 mensen en kreeg gemiddeld 5.0 sterren uit 25 reviews. Heb je een vraag over Ade Gravis-210504 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
OPERATING INSTRUCTIONS
Gravity Slicer
Model GRAVIS 250
Gravis- -Rev004- - 210504 UM en
1 Gravis- -Rev004- -210504 UM en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
1.1 Introduction ............................................................................................................................ 2
1.2 Use ........................................................................................................................................ 2
1.3 Residual risks ........................................................................................................................ 3
2. START- 3UP.............................................................................................................................
2.1 Installation ............................................................................................................................. 3
2.2 Wiring .................................................................................................................................... 3
2.3 Mechanical safety devices ..................................................................................................... 4
2.4 Electrical safety devices 4 .........................................................................................................
2.5 Acceptance testing ................................................................................................................ 4
2.6 Safety precautions ................................................................................................................. 4
2.7 Operation ............................................................................................................................... 5
3. USING THE MACHINE .......................................................................................................... 5
3.1 Machine Overview ................................................................................................................. 5
3.2 Operating functions ................................................................................................................ 6
3.3 Switching on .......................................................................................................................... 6
3.4 Feeding the product ............................................................................................................... 6
3.5 Adjusting the slice thickness .................................................................................................. 6
4. CLEANING AND CARE ......................................................................................................... 6
4.1 Cleaning ................................................................................................................................ 6
4.2 SHARPENING OPERATIONS............................................................................................... 7
4.3 Lubricating ............................................................................................................................. 8
4.4 Disposal ................................................................................................................................. 8
5. TRAINING ............................................................................................................................. 9
6. WARRANTY .......................................................................................................................... 9
7. TECHNICAL DATA ................................................................................................................ 9
8. CE MARKING AND DECLARATION OF CONFORMITY ..................................................... 10
9. CIRCUIT DIAGRAM ............................................................................................................ 11
10. EXPLODED VIEW ............................................................................................................... 11
11. SPARE PARTS LISTS ......................................................................................................... 13
Gravis- -Rev004- - 2 210504 UM en
1. FOREWORD
This symbol means: “Observe operating instructions.” Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This manual has been written to comply with the Machinery Directive as amended.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is tted to assure maximum eciency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the instructions and explanations
contained in the manual.
Before starting up the slicer, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insucient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
1.1 Introduction
The slicers have been designed to comply with applicable safety standards. Consequently, all our
slicers are fitted with a plate featuring the “CE” mark attesting to the product's conformity with said
provisions.
The housing, product carriage, feed plate, and sickle guard are made of anodized aluminum. The
housing design enables easy cleaning. The blade is set in motion by an electric motor with a V-belt
drive, which has a noise level of <70 dB measured at a distance of 1 meter at a height of 1.60 meters.
The total vibration of the parts coming into contact with the user's hands and arms is <2.5 m/s².
1.2 Use
These gravity slicers are intended for slicing cooked and raw sausages, hot or cold meat, bread, and
various types of cheese. The machine is not suitable for slicing some types of hard cheese. The slice
thickness is adjustable from 0 to 13 mm. When slicing cheese, we recommend using a blade with
Teon coating at cheese temperatures between 7 and 10 °C.
Never use the slicer to slice frozen products, meats, or sausage products with
bones, fruits, vegetables, or non-food products.
Any attempt to slice such products or similar foods may cause severe damage to
the machine and render the warranty null and void.
The machine is suitable for about 60 catering sta members. The above gure is merely a
recommendation based on experience and may vary depending on the application. The maximum
duty cycle is 40% (24 minutes per hour). The electric motor must then be allowed sucient time to
cool down. Operating the machine continuously for shorter periods also shortens the cooling
intervals. The machine is equipped with thermal overload protection. When the machine's electric
motor gets overheated, it switches o automatically. If this occurs, switch the machine o
immediately. Allow sucient time for the motor to cool down before switching the machine back on.
Thermal overload protection merely serves as another safety measure and should never be thought
of as a time limit for the duty cycle in the daily operation.
The machine may only be used in its original condition and with original parts. It is strictly forbidden
to dismantle the safety devices. If you notice any signs of damage to the safety devices or if any
safety devices are not in place, shut down the machine immediately and contact ADE for repair or
replacement.
Product specificaties
| Merk: | Ade |
| Categorie: | Snijmachine |
| Model: | Gravis-210504 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ade Gravis-210504 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Ade
3 Juli 2024
3 Juli 2024
3 Juli 2024
6 December 2023
6 December 2023
6 December 2023
16 Juni 2023
12 Juni 2023
21 April 2023
28 Maart 2023
Handleiding Snijmachine
- Borner
- Graef
- Trebs
- Backyard Pro Butcher Series
- Saturn
- Mach
- Ozito
- Festool
- Vox
- Bizerba
- FAC
- Dremel
- Vollrath
- Swan
- Skil
Nieuwste handleidingen voor Snijmachine
15 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025