Ade Diagonal SN1 Handleiding
Ade
Snijmachine
Diagonal SN1
Bekijk gratis de handleiding van Ade Diagonal SN1 (57 pagina’s), behorend tot de categorie Snijmachine. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 4.9 sterren uit 29.5 reviews. Heb je een vraag over Ade Diagonal SN1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/57
Gravity feed slicer
DIAGONAL SN
DiagonalSN-210927-Rev009-UM-en
Manufacturer:
ADE Germany GmbH | Neuer Höltigbaum 15 | 22143 Hamburg, Germany
Tel.: +49 (0) 40 / 432776-0 | Fax: +49 (0) 40 / 432776-10
E-mail: info@ade-hamburg.de
Operating Manual | EN
Translated manual
2DiagonalSN-210927-Rev009-UM-en
TABLE OF CONTENTS
About this manual ................................................................................... 3
General information .......................................................................... 3
Storage .............................................................................................. 3
Target group ...................................................................................... 3
Explanation of symbols ..................................................................... 4
Intended use ...................................................................................... 4
Scope of delivery 4 ...............................................................................
Optional accessories 5 .........................................................................
Dealer ...................................................................................................... 5
Safety ...................................................................................................... 6
Training the operating personnel ........................................................... 8
Parts and controls 9 ...................................................................................
Start-up ................................................................................................. 12
Notes on the installation site .......................................................... 12
Unpacking and installing the machine ............................................ 12
Switching the machine on ............................................................... 12
Switching the machine off............................................................... 12
Installing the machine ..................................................................... 13
Conducting an acceptance inspection 13 ............................................
Cleaning before the first use 13 ...........................................................
Slicing food ............................................................................................ 14
Cleaning ................................................................................................. 17
Changing/replacing the circular blade .................................................. 22
Maintenance and care .......................................................................... 22
Sharpening the blade ............................................................................ 24
Storage and transport ........................................................................... 26
Technical data ....................................................................................... 27
Name plate ............................................................................................ 27
Warranty ............................................................................................... 27
Declaration of conformity .................................................................... 28
Disposal ................................................................................................. 28
Appendix ............................................................................................... 29
About this manual
3
DiagonalSN-210927-Rev009-UM-en
ABOUT THIS MANUAL
GENERAL INFORMATION
This operang manual describes the safe operaon as well as the handling, care and
maintenance of the machine.
Only compliance with the operating manual is considered to be proper use.
Therefore, read this operang manual carefully before connecng and using the
machine. Failure to observe this operang manual may result in injuries or damage to
your product.
Our products are constantly being developed and improved. For this reason, design
and technical modicaons are possible at any me. However, this has no inuence
on the content of this manual.
The slicer is designed and assessed in accordance with the latest version of the EN
1974 Safety Standard and bears the CE mark as a sign of conformity with the relevant
requirements.
Producon based on the technical documents supplied is not permied.
STORAGE
The operating manual is an integral part of the machine. It must be kept in the immediate
vicinity of the machine and be easily accessible to everyone.
If the machine is resold, the operating manual must be included.
TARGET GROUP
This operating manual is intended for personnel entrusted with the installation, handling,
care and maintenance of the machine.
Personnel who operate the machine must have read and understood this operang
manual before using it for the rst me and must have been instructed in the
operaon of the machine by the owner/operator. Above all, the dangers arising from
improper use must therefore be pointed out. The owner/operator must ensure that
the operang personnel (“operators”) are able to use the machine as intended and
safely.
Maintenance and adjustment work, e.g. blade sharpening, may only be carried out by
authorised and trained personnel.
Product specificaties
| Merk: | Ade |
| Categorie: | Snijmachine |
| Model: | Diagonal SN1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ade Diagonal SN1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Ade
3 Juli 2024
3 Juli 2024
3 Juli 2024
6 December 2023
6 December 2023
6 December 2023
16 Juni 2023
12 Juni 2023
21 April 2023
28 Maart 2023
Handleiding Snijmachine
- Rotel
- Backyard Pro Butcher Series
- Black And Decker
- Magic Chef
- Exquisit
- Weston
- Toolland
- Domo
- Nemco
- Grundig
- Emga
- Trebs
- Bomann
- JAC
- GOTIE
Nieuwste handleidingen voor Snijmachine
15 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025