Ade AUTOMATIC-XL Handleiding
Ade
Snijmachine
AUTOMATIC-XL
Lees hieronder de đ handleiding in het Nederlandse voor Ade AUTOMATIC-XL (20 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
OPERATING INSTRUCTIONS
Slicer with automatic transmission
AUTOMATIC- XL
Automatic- - -Rev002-XL 231117 UM- en
1 Automatic- - -Rev002-XL 231117 UM-en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
2. INTENDED USE .................................................................................................................... 2
3. OVERVIEW ........................................................................................................................... 3
3.1 Machine ................................................................................................................................. 3
3.2 Control panel ......................................................................................................................... 4
4. START-UP AND SAFETY PRECAUTIONS .......................................................................... 4
4.1 Opening the packaging .......................................................................................................... 4
4.2 Installation ............................................................................................................................. 5
4.3 Wiring .................................................................................................................................... 5
4.4 Mechanical safety devices ..................................................................................................... 5
4.5 Acceptance testing ................................................................................................................ 6
5. OPERATING THE SLICER ................................................................................................... 6
5.1 Normal operation (manual operation) 6 .....................................................................................
5.2 Automatic operation ............................................................................................................... 7
5.3 Switching oî .......................................................................................................................... 8
5.4 Brieîy interrupting the automatic mode .................................................................................. 8
5.5 Counting function/inputting the number .................................................................................. 8
5.6 Setting the speed ................................................................................................................... 8
5.7 Setting the stroke length ........................................................................................................ 9
5.8 Using the machine ................................................................................................................. 9
6. CLEANING AND CARE ...................................................................................................... 10
6.1 Cleaning .............................................................................................................................. 10
6.2 Lubricating ........................................................................................................................... 11
7. SHARPENING THE BLADE ............................................................................................... 12
8. TRAINING ........................................................................................................................... 14
9. STORAGE AND TRANSPORTATION CONDITIONS ......................................................... 14
10. DISPOSAL .......................................................................................................................... 14
11. WARRANTY ........................................................................................................................ 14
12. TECHNICAL DATA ............................................................................................................. 14
13. DIAGRAMS ......................................................................................................................... 15
14. DECLARATION OF CONFORMITY .................................................................................... 16
Automatic- - -Rev002- - 2 XL 231117 UM en
1. FOREWORD
This symbol means: âObserve operating instructions.â Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This publication contains all the information necessary for the installation, operation, and
maintenance of the slicers.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is îtted to assure maximum eîciency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the instructions and explanations
contained in the manual.
Before starting up the slicer, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insuîcient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
The slicers have been designed to comply with applicable safety standards. Consequently, all our
slicers are fitted with a plate featuring the âCEâ mark attesting to the product's conformity with said
provisions.
2. INTENDED USE
These slicers have been manufactured to slice:
- cooked and raw charcuterie,
- warm and cold meats,
- bread and cheese,
- stoneless fruit and vegetables.
The machine is intended for continuous operation in commercial gastronomic applications. It can
slice thicknesses up to 15 mm.
The slicers must never be used for cutting frozen goods, charcuterie, and meat
on the bone or fruit with stones. Any attempt to slice said products or similar
foods may result in severe damage to the machine and shall cause the warranty
to become void.
Product specificaties
| Merk: | Ade |
| Categorie: | Snijmachine |
| Model: | AUTOMATIC-XL |
Heb je hulp nodig?
Als je hulp nodig hebt met Ade AUTOMATIC-XL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Ade
6 December 2023
6 December 2023
6 December 2023
16 Juni 2023
12 Juni 2023
21 April 2023
28 Maart 2023
15 Februari 2023
5 Februari 2023
14 November 2022
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Borner
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Team
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine CaterChef
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
10 April 2024
10 April 2024
27 Maart 2024
27 Maart 2024
14 Maart 2024
13 Maart 2024
1 Maart 2024
24 Februari 2024
15 Februari 2024
30 Januari 2024