Ade Automatic-Z Handleiding
Ade
Snijmachine
Automatic-Z
Lees hieronder de đź“– handleiding in het Nederlandse voor Ade Automatic-Z (20 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
OPERATING MANUAL
Gravity Feed Slicers with automatic
Transmission
Model AUTOMATIC /AUTOMATIC-Z
Automatic_Automatic-Z-210504-Rev015-UM-en
Automatic
-
Z
Automatic
1 Automatic_Automatic-Z-210504-Rev015-UM-en
1. Content
Content ........................................................................................................................................... 1
1. FOREWORD ........................................................................................................................... 2
2. INTENDED USE ..................................................................................................................... 2
3. FIGURES ................................................................................................................................ 2
4. PREPARATION AND OPERATION ........................................................................................ 4
3.1 Opening the packaging ......................................................................................................... 4
3.2 Installation ............................................................................................................................. 4
3.3 Wiring.................................................................................................................................... 5
3.4 Operation .............................................................................................................................. 5
3.5 Operation in automatic mode ................................................................................................ 5
5. CONTROLS AND SAFETY DEVICES .................................................................................... 5
4.1 Controls ................................................................................................................................ 5
4.2 Mechanical safety devices .................................................................................................... 5
4.3 Testing .................................................................................................................................. 6
6. USING THE SLICER ............................................................................................................... 6
5.1 Operating procedure ............................................................................................................. 6
5.2 Option Counting Device ........................................................................................................ 6
7. MAINTENANCE AND CARE OF THE SLICER ....................................................................... 7
6.1 Cleaning ................................................................................................................................ 7
6.2 Lubricating ............................................................................................................................ 7
8. SHARPENING OPERATIONS ................................................................................................ 7
7.1 Sharpening the blade ............................................................................................................ 8
9. TRAINING ............................................................................................................................... 8
10. CLEANING AND MAINTENANCE .......................................................................................... 9
11. STORAGE AND TRANPORT.................................................................................................. 9
12. DISPOSAL .............................................................................................................................. 9
13. WARRANTY ........................................................................................................................... 9
14. TECHNICAL DATA ............................................................................................................... 10
15. CE AND CERTIFICATE OF CONFORMITY .......................................................................... 11
16. WIRING DIAGRAMS ............................................................................................................. 12
17. EXPLODED VIEWS .............................................................................................................. 13
18. SPARE PART LISTS ............................................................................................................ 16
Automatic_Automatic-Z-210504-Rev015-UM-en 2
2. FOREWORD
This symbol means: "Consult operating instructions". Read the instructions for use
carefully before use and follow all instructions provided therein. Keep the instructions
for use for future reference.
With this manual the manufacturer intends to furnish the customer with clear and concise
instructions for the use and maintenance of the machine, as well as information regarding the safety
devices with which it is fitted in order assure maximum efficiency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the explanations contained in the
manual.
Before starting up the slicer, you are advised to read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer without delay.
Many accidents are the result of insufficient familiarity with the machine and its safety devices.
Before starting work, read the instructions herein carefully and follow them to the letter.
The Gear Drive Gravity slicers have been designed to comply with the provisions of the European
community safety regulations. Consequently, each slicer is fitted with a plate featuring the "CE"
mark attesting to the products conformity with said provisions.
3. INTENDED USE
These slicers have been manufactured to slice:
- cooked and raw charcuterie,
- warm and cold meats,
- bread and cheese,
- stoneless fruit and vegetables.
The machine is intended for continuous operation in commercial gastronomic applications. They
can slice thicknesses up to 15mm.
Slicers are not suitable for cutting frozen goods, charcuterie and meat on the bone
or fruit with stones.
Any attempt to slice said products or similar foods may result in serious damage to
the machine and shall cause the warranty to become void.
4. FIGURES
Fig. 1
Product specificaties
| Merk: | Ade |
| Categorie: | Snijmachine |
| Model: | Automatic-Z |
Heb je hulp nodig?
Als je hulp nodig hebt met Ade Automatic-Z stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Ade
6 December 2023
6 December 2023
6 December 2023
16 Juni 2023
12 Juni 2023
21 April 2023
28 Maart 2023
15 Februari 2023
5 Februari 2023
14 November 2022
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Borner
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Team
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine CaterChef
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
10 April 2024
10 April 2024
27 Maart 2024
27 Maart 2024
14 Maart 2024
13 Maart 2024
1 Maart 2024
24 Februari 2024
15 Februari 2024
30 Januari 2024