Ade Prosciutto 300 Handleiding
Ade
Snijmachine
Prosciutto 300
Lees hieronder de 📖 handleiding in het Nederlandse voor Ade Prosciutto 300 (20 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
INSTRUCTION MANUAL
Flywheel Slicer
PROSCIUTTO
300
Prosciutto300-210928-Rev007-UM-en
1 Prosciutto300-210928-Rev007-UM-en
TABLE OF CONTENTS
1.
INTRODUCTION ...................................................................................................................................... 2
1.1
Purpose of the manual ............................................................................................................................. 2
1.2
General description of the machine.......................................................................................................... 2
1.3
Usage of the machine .............................................................................................................................. 2
2.
COMMISSIONING ................................................................................................................................... 3
2.1
Unpacking ................................................................................................................................................. 3
2.2
Installation ................................................................................................................................................ 4
3.
SAFETY INSTRUCTIONS ....................................................................................................................... 4
3.1
General safety regulations ....................................................................................................................... 4
3.2
Mechanical cutouts ................................................................................................................................... 5
3.3
Acceptance inspection ............................................................................................................................. 5
4.
USAGE AND CLEANING ......................................................................................................................... 6
4.1
Overview ................................................................................................................................................... 6
4.2
Functionality ............................................................................................................................................. 7
4.3
Loading the goods .................................................................................................................................... 7
4.4
Cutting the goods ..................................................................................................................................... 8
4.5
Cleaning the slicing machine .................................................................................................................... 8
5.
MAINTENANCE AND REPAIRS .............................................................................................................. 9
5.1
Sharpening the blade ............................................................................................................................... 9
5.2
Lubricating the guide bars and overplate ............................................................................................... 10
6.
COURSE OF INSTRUCTION ................................................................................................................ 10
7.
STORAGE, TERMS OF TRANSPORT AND SCRAPPING ................................................................... 10
7.1
Storage and terms of transport............................................................................................................... 10
7.2
Scrapping ............................................................................................................................................... 10
8.
WARRANTY ........................................................................................................................................... 11
9.
TECHNICAL SPECIFICATIONS ............................................................................................................ 12
10.
CE – LABELING AND DECLARATION OF CONFORMITY .................................................................. 13
11.
EXPLODED VIEW .................................................................................................................................. 14
Prosciutto300-210928-Rev007-UM-en 2
1. INTRODUCTION
This symbol means: "Consult operating instructions". Read the instructions for use carefully
before use and follow all instructions provided therein. Keep the instructions for use for future
reference.
1.1 Purpose of the manual
This publication contains all the information necessary for the installation, use and maintenance of the
manual flywheel slicing machines to be used for food, with circular blade.
The purpose of this manual is to allow the user, above all the direct user, to take every precaution and arrange
all human and material means necessary for a safe and lengthy use of these machines.
The slicing machines are subject to continuous improvements, which do not restrain the current instructions
in this handbook.
This manual must be given to the person who will use and maintain the machines and this person will keep
the manual in a safe and dry place, ready to be used. We recommend that a copy is being kept on file.
The manual must be kept for the entire life of the machine and in case of need (ex. any damage to even a part
of the manual that makes consulting it difficult) the user must acquire a new copy exclusively from the
manufacturer. The user must let the manufacturer know the address of any new owner of the machine.
For any correspondence with the manufacturer or authorized personnel, please refer to the information on
the plate and the machine serial number.
1.2 General description of the machine
The slicing machine has been designed and made to offer maximum safety when in use, during cleaning and
ordinary maintenance; maximum hygiene from the use of inoxidisable materials or adequately protected
against oxidation together with an attentive design of all the parts that come into contact with food;
maximum cutting precision and capacity together with sturdiness and reliability of the structure.
The machine is essentially made up of a base that holds a circular blade that is vertically mounted and a sliding
carriage on bars, parallel to the cutting edge of the blade, which in turn holds a food plate.
The food plate is made up of a base plate and an overplate which slides at right angles to the edge of the
blade for slicing the food; the overplate also has an appropriate self-stopping device, which can be regulated
in height, to keep the product in its proper place during cutting operations (food press).
Carriage movement and blade rotation are completely manual; by activating rotation of the flywheel with the
special handle, the carriage is put into motion and the blade is turns at the same time with a chain
transmission.
The product is cut during the forward movement of the carriage, parallel to the blade; the thickness of the
slice is regulated by a mechanical device which is automatically started every time the carriage comes back,
making the sliding overplate transversally towards the blade, with a value which is pre-determined by the
graduated handwheel.
All the components of the machine are made of a light aluminium alloy, in stainless steel and plastic for food
products as according to the sanitary regulations in force.
The machine has a sharpener which is extremely easy and safe to use. The food plate, sharpener and blade
cover can be removed for cleaning.
1.3 Usage of the machine
The manual flywheel slicer of the series PROSCIUTTO serves the slicing of boiled, smoke-dried and raw
sausage products, warm and cold (temperature not less than +3°C) meat without bones, cheese and bread.
The cutting thickness ranges from 0 to 2 mm for Prosciutto300.
Product specificaties
| Merk: | Ade |
| Categorie: | Snijmachine |
| Model: | Prosciutto 300 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ade Prosciutto 300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Ade
6 December 2023
6 December 2023
6 December 2023
16 Juni 2023
12 Juni 2023
21 April 2023
28 Maart 2023
15 Februari 2023
5 Februari 2023
14 November 2022
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Borner
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Team
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine CaterChef
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
10 April 2024
10 April 2024
27 Maart 2024
27 Maart 2024
14 Maart 2024
13 Maart 2024
1 Maart 2024
24 Februari 2024
15 Februari 2024
30 Januari 2024