Vaxcel Dalton C0320 Handleiding

Bekijk gratis de handleiding van Vaxcel Dalton C0320 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Vaxcel Dalton C0320 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save this instructions.

C0320

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Hardware Package (included):

Turn off the power at fuse or circuit box

Turn on the power at fuse or circuit box

Installation Steps

1. Unscrew the two set screws (D), remove

the mounting plate unit (A) from the canopy kit.

2. Attach mounting plate unit (A) to the outlet

box using two mounting screws (B).

3. Pull out the source wires from the outlet box.

Make wire connections using wire connectors (C) as follows:

• Connect the hot wire (black insulation) from the fixture to the black wire from the power source.

• Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.

• Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with green ground screw, then

depending on local code, connect it to the house ground wire with the wire connector (C).

Carefully put all of the wires back into the outlet box.

4. Attach the canopy kit to the mounting plate unit (A) by using two set screws (D).

5. Adjust the spot light heads to desired position.

1-a1-b

Toggle Switch

Color Temperature

3000K-4000K-5000K

Toggle Switch

Adjusting the Correlated Color Temperature (CCT) of the Light

Customize the correlated color temperature (CCT) of the LED light by moving the toggle

switch (For Reference).

a. Move the toggle switch to 3000K, the color temperature will be set at Soft White.

b. Move the toggle switch to 4000K, the color temperature will be set at Bright White.

c. Move the toggle switch to 5000K, the color temperature will be set at Daylight.

Wire Connector (C)Mounting Screw (B)Mounting plate Unit (A)Set Screw (D)

House Ground Wire

Fixture Ground Wire

Wire Connector (C)

Mounting Plate Unit (A)

Green Ground Screw

Mounting Screw (B)

Outlet Box

Fixture Wire

Canopy Kit

Set Screw (D)

Page 1 / 2

250303

Product specificaties