Thermaltake Pacific MX1 Plus Handleiding

Thermaltake Hardwarekoeling Pacific MX1 Plus

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific MX1 Plus (2 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

Before you start using this product please follow these basic guidelines:

1. Please carefully read through the instruction manual before beginning the installation process.

2. Please remove your graphics card from your motherboard to insure the safest process and in order to prevent

any possible damages to your CPU and motherboard.

3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant Series.

Intel LGA1366,LGA1200,LGA115x Intel LGA2066,2011-3,2011

AMD

JGG

A x 1

B x 2 C x 1 D x 4

F x 4 G x 4 H x 4 J x 1I x 1

E x 4

Parts

List

Water Block

AMD clip

Thermal grease

Screw ScrewWasher

Backplate Screw Screw

Wrench

1.FM2/FM1/AM3/AM2

2.AM4

3.LGA1366

4.LGA1200/1156/1155/1151/1150

Pacific MX1 Plus

Controller Parts List

Controller Power Cable Velcro

Controller Cable

Kx 1 Lx 1 Mx Px 1

Installation Guide

Install the Water Block on the mainboard properly,

and connect the water block cable to the conversion cable.

Connect the plug into the port in numerical order,

start with plug one.

Set the DIP switch on the back side of the controller to assign

the number of the controller

NO.1

1234

NO.3

1234

NO.2

1234

NO.4

1234

NO.9

1234

NO.1 1

1234

NO.1 0

1234

NO.1 2

1234

NO.5

1234

NO.7

1234

NO.6

1234

NO.8

1234

NO.1 3

1234

NO.1 5

1234

NO.1 4

1234

NO.1 6

1234

Connect the controller cable onto the mainboard

(USB 2.0 9 pin) and controller.

Connect the power cable to the 4pin Molex connecter

and controller.

Conversion Cable

Nx 1

123

Bridge Cable

Ox 1

OO O

1 2 3 4

TEMP. Controller Plus Controller Quad / Trio Controller

1. Pacific MX1 Plus is only compatible with Temp controller

2. Connect the controller cable to Temp controller ,

and then connect the rest of controllers in series

Connect with other addressable LED product

Pacific MX1 Plus is only compatible with Temp controller

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific MX1 Plus
Kleur van het product:	Zwart
Gewicht:	670 g
Breedte:	93.4 mm
Diepte:	93.4 mm
Hoogte:	52.2 mm
Soort:	Waterblok
Netvoeding:	2.4 W
Materiaal:	Cooper,Polyphenylene sulfide (PPS)
Aantal per verpakking:	1 stuk(s)
Verlichtings-led:	Ja
Geschikte locatie:	Processor
Ventilator diameter:	Nee mm
Spanningclassificatie:	5 V
Supported processor sockets:	LGA 1150 (Socket H3),LGA 1151 (Socket H4),LGA 1155 (Socket H2),LGA 1156 (Socket H),LGA 1200 (Socket H5),LGA 1366 (Socket B),LGA 2011 (Socket R),LGA 2011-v3 (Socket R),LGA 2066,Socket AM2,Socket AM2+,Socket AM3,Socket AM3+,Socket AM4,Socket FM1,Socket FM2