Thermaltake Pacific DP100-D5 Plus Handleiding

Thermaltake Hardwarekoeling Pacific DP100-D5 Plus

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake Pacific DP100-D5 Plus (2 pagina's) in de categorie Hardwarekoeling. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !

Installation Guide

Parts List

To install the DP100 in your

chassis, placing a screw and

washer that comes with the DP100

on every screw hole that matches

the circles in below picture.

1 2 3

Dis t ro Plate

Ax 1

LED Y Cable -

B x 1

Was h er

C x 12

Screw

D x 12

G1/4 Stop P lug

E x 4

Wrench

F x 1

Control ler

G x 1

Power Cable

H x 1

Control ler Cable

I x 1

Bri dge Cable

J x 1

MB SY NC Cable

K x 1

Vel c ro

L x 1

Circle 1 is designed for liquid outlet, you may

choose one of the ports to use.

Circle 2 is designed for liquid inlet/fill, you may

choose one of the ports to use.

Circle 3 is the drain port.

Assembly example can refer to

the following figure.

To avoid air bubble

during liquid cooling

system working, please

fill the reservoir with

coolant to the line

(Normal coolant level)

2 2

Connect the LED Y-Cable onto

the Distro Plate.

Patented

16.8 Million Color

Pacific Plus

DP 00-D51

Installation Guide

Connect the reservoir cable onto the controller.

Set the DIP switch on the back side of the controller

to assign the number of the controller

NO .1

1234

NO .3

1234

NO .2

1234

NO .4

1234

NO .9

1234

NO .1 1

1234

NO .1 0

1234

NO .1 2

1234

NO .5

1234

NO .7

1234

NO .6

1234

NO .8

1234

NO .1 3

1234

NO .1 5

1234

NO .1 4

1234

NO .1 6

1234

Connect the controller cable onto the mainboard

(USB 2.0 9 pin) and controller.

If you want to connect two or more connectors,

you can use the bridge cable to connect the

controllers.

Connect the power cable to the 4pin Molex

connecter and controller.

www.thermaltake.com

123 45

G G

1 2 3 4

Product specificaties

Merk:	Thermaltake
Categorie:	Hardwarekoeling
Model:	Pacific DP100-D5 Plus
Breedte:	120 mm
Diepte:	360 mm
Hoogte:	84.8 mm
Soort:	Pomp & reservoir
Montage gereedschap:	Ja
Materiaal:	Polymethylmethacrylaat (PMMA)
Luchtstroom:	1.13 m³/uur
Aantal per verpakking:	1 stuk(s)
Geschikte locatie:	Videokaart
Pomp motor snelheid (max):	4800 RPM
Maximum luchtdruk:	35154.4 mmH2O
Pulsbreedtemodulatie-ondersteuning:	Nee
Pomp motor snelheid (min):	1800 RPM
Pomp voltage:	12 - 5 V
Pompconnector:	4-pin
Coolant capaciteit:	0.2 l