Sussex CBM-54 Handleiding
Bekijk gratis de handleiding van Sussex CBM-54 (1 pagina’s), behorend tot de categorie Kraan. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Sussex CBM-54 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
5.0
litres per
minute
Licence No. 0124
In accordance with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterrating.gov.au
The more
stars the more
water efcient
Product code
Installation guidelines
Plumber note
Calibre
- The Mixer is supplied assembled, only the Fixing nut and the clamp need to be removed.
- After removing the mentioned parts, lower the Mixer on to the mounting surface and fit the Flexible Hoses.
- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then
attached. (Tighten using appropriate spanner)
- After securing the Flexible Hoses, fit Clamp and attach the Fixing Nut from underneath.
- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is properly centred over the
mounting surface hole.
- The Mixer mounting surface must be completely sealed and water-tight.
- The 1/2” Fittings of the Flexible Hoses have a conical seal, ensure that the matching threads are cut square
and burr free.
- Prior to connecting the Flexible Hoses, ensure all pipework is thoroughly flushed and ensure pipework is free of
any dirt or debri.
- Isolating Stop Valves are recommended with all installations.(not supplied)
- Connect the Flexible Hoses to Hot and Cold pipework fittings, ensure the Hoses do not kink or become twisted
when tightening.
- Check all fittings and connections are secure and water-tight.
- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.
(STATIC TEST)
- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.
- At the completion of testing, do not relieve any high water pressure by operating the Mixer.
- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the
manufacturers warranty.
CBM Basin mixer
CEBM Extended basin mixer
Basin mixer
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.sussextaps.com.au
Product specificaties
| Merk: | Sussex |
| Categorie: | Kraan |
| Model: | CBM-54 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sussex CBM-54 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kraan Sussex
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
Handleiding Kraan
- Puretec
- Livarno
- Viidako
- Aloni
- Shaws
- Oras
- Vola
- Deante
- Empire
- ZLine
- Mizzo
- American Standard
- Fantini
- Stiebel Eltron
- TOTO
Nieuwste handleidingen voor Kraan
17 Juni 2025
16 Juni 2025
16 Juni 2025
23 Mei 2025
21 Mei 2025
20 Mei 2025
15 Mei 2025
15 Mei 2025
15 Mei 2025
15 Mei 2025