Sussex VSM-04 Handleiding
Pagina's 1 Engels Kraan
Bekijk de handleiding van Sussex VSM-04 gratis online of download de PDF. 25 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
PLUMBER NOTE
҃On-site testing using higher water pressures must be conducted
with the Mixer in the closed position. (STATIC TEST)
҃Under no circumstances is the Mixer to be opened when
exceeding the maximum stated water pressure.
҃At the completion of testing, do not relieve any high water
pressure by opening the Mixer.
҃Exposing the internals of the Mixer Cartridge to higher than
specified water pressures will void the manufacturers warranty
INSTALLATION GUIDELINES
҃The Mixer is supplied assembled, only the Fixing nut and the Brass
Clamp need to be removed.
҃Decide if the Optional Base Flange is to be used.
҃If using the Optional Base Flange discard the smaller Base O Ring.
҃Add the base Flange to base of Mixer and attach the Flexible Hoses
to the Mixer Hose extensions.
҃In some cases the Flexible Hoses may need to be fed through from
under the mounting surface and then attach.
҃Once the Flexible Hoses have been secured, lower the Mixer onto
the mounting surface.
҃Working from underneath the mounting surface fit Clamp and
Fixing Nut.
҃Before fully securing the Mixer ensure that the Base O Ring is
intact and the Mixer is centered over the mounting surface hole .
҃The Mixer mounting surface must be completely water-tight.
҃Connect the Hot and Cold Flexible hoses to the corresponding
1/2”BSP water feed lines.
҃The 1/2” connection of the Flexible hoses have a conical seal,
ensure the mating threads are cut square and burr free.
҃Isolating stop valves are recommended with all installations.
(not supplied)
҃Ensure all fittings and connections are water-tight.
NOTE:Optional Base Flange must be used when the clearance
hole for mounting the Mixer exceeds 35mm. If the mounting
hole clearance exceeds 45 mm a custom made Base flange
will be required.
Pin
Handle
Handle
Body
Sink Mixer
Body
Sink Mixer
Stand
32 - 35mm
Hose extension
(Do not remove)
Base Flange
Clamp
Fixing
Nut
Surface
Flexible Hose
Voda Sink Mixer Right Hand
Product code:Available opons:
VSMSink Mixer
VSMCSink Mixer Curved
VSMQSink Mixer Square
VSMCSSRHSink Mixer Curved 316 S/S
VSMQSSRHSink Mixer Square 316 S/S
INSTALLATION GUIDE
sussextaps.com.au
Tapware is to be installed by a Licensed
Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa.
Maximum water temperature is 65 deg.c.
sussextaps.com.au
IMPORTANT NOTE: To provide proper function,
the Sink Mixer must be installed with the handle
to the RIGHT-HAND side of the operator.
NOTE: Mixer handle
to be RIGHT-HAND
side of the operator.
Product specificaties
| Merk: | Sussex |
| Categorie: | Kraan |
| Model: | VSM-04 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sussex VSM-04 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kraan Sussex
Sussex VEBM120 Handleiding Sussex BLMDSRH Handleiding Sussex BMDSRH Handleiding Sussex VSMC-14 Handleiding Sussex CBM-54 Handleiding Sussex VWBMS160RH Handleiding Sussex VSMQ-60 Handleiding Sussex VFM200TSXFMMIK Handleiding
Alle Sussex Kraan handleidingen
Populair in Kraan
Handleiding Kraan
Nieuwste handleidingen voor Kraan
American Standard Rumson 7417101.295 Handleiding American Standard Edgemere 9016100.002 Handleiding American Standard Delancey 7052114.002 Handleiding American Standard Delancey 4279400.002 Handleiding American Standard Jocelyn 9316003.002 Handleiding American Standard Kaleta 7506100.075 Handleiding American Standard Callahan 9389110.002 Handleiding Elkay LK543AF08LC Handleiding Elkay LK943AF10C Handleiding Elkay LK543C Handleiding