Sussex RBS Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Sussex RBS (1 pagina's) in de categorie Kraan. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
5.0
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterr ating.g ov.au
The mo re
stars the mo re
water efcient
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.
60 mm
Spindle
Handle
Body
Sleeve
Locking
Washer
Fibre
Ceramic
Spindle
Cartridge
Set
Screw
NOTE:
Tee piece is to be breeched
between basin bodies.
Length of Tee piece may require cutting to suit.
Basin
Body
HOT COLD
Outlet Locknut
Breech
Locking Sleeve must be
fully tightened to the Basin Body
prior to tightening the assembly
from underneath.
Important Note:
0 Ring
O Ring
Plastic Washer
FRONT
Outlet Flange will
be labelled Front
installation
Tighten Basin Body
Locknut only after the
Locking Sleeves have
been fully tightened
32 - 35 mm
Maximum
thickness
28 mm
Basin Body L
ocknut
Locking Screw
Mounting
Surface
Raise Basin Body assembly through the
Mounting Surface to tighten Locking Sleeve. (As Shown)
Fig.1
The Fibre washer must
seal the Locking Flange
to the Basin Body.
Use locking screws
to secure from under
bench
Product code
Installation guidelines
Circa
RBS Basin set
Basin set
- The Spindles will be supplied fitted into the Basin Bodies when supplied.
- Determine the distance of the Basin/Hob holes and cut the breech to suit.
- Place the Outlet Locknut and Plastic Washer over the outlet fitting of the Breech.
- Align the breeched Basin Bodies and fit through the mounting surface.
- Fit the Fibre Washer over the spindles.
- Raise the assembled Basin Body through the mounted surface and fit the Locking Sleeves.
- Fully tighten Locking Sleeves and ensure O Ring is intact before lowering assembly onto
mounting surface. (See Fig.1)
- Working from underneath tighten the Basin Body Locknut to secure the assembly.
- Outlet must be secured with the FRONT label facing the user.
- Remove label after final installation.
- Fit the Outlet to Breech and secure by tightening the locknut, ensure O Ring is intact.
- Once all parts are tightened fit Handle and secure with Set Screw using Allen Key.
- Connect Hot and Cold feed lines to the Basin Bodies.
- Check all parts, fittings and connections for any water leaks.
RBS Basin set
RBSHS Basin sink set high
RBS-V Basin set - Vertex
RBSHS-V Basin sink set high - Vertex
sussextaps.com.au
Product specificaties
| Merk: | Sussex |
| Categorie: | Kraan |
| Model: | RBS |
Heb je hulp nodig?
Als je hulp nodig hebt met Sussex RBS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kraan Sussex
13 Maart 2024
12 Maart 2024
12 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
Handleiding Kraan
- Kraan IKEA
- Kraan Etna
- Kraan Inventum
- Kraan Brita
- Kraan Delta
- Kraan Ernesto
- Kraan Franke
- Kraan Grohe
- Kraan Hansgrohe
- Kraan Hotto
- Kraan KitchenAid
- Kraan Livarno
- Kraan Lynx
- Kraan Miomare
- Kraan Quooker
- Kraan Smeg
- Kraan Stiebel Eltron
- Kraan Teka
- Kraan Blanco
- Kraan Caple
- Kraan CDA
- Kraan Curaqua
- Kraan Schütte
- Kraan Lamona
- Kraan Nodor
- Kraan Empire
- Kraan Brauer
- Kraan Elkay
- Kraan Oras
- Kraan Berg
- Kraan Mizzo
- Kraan ZLine
- Kraan Mueller
- Kraan Aloni
- Kraan WillieJan
- Kraan Everpure
- Kraan Sani-Lav
- Kraan Fala
- Kraan Neo
- Kraan Lomazoo
- Kraan American Standard
- Kraan Livarno Lux
- Kraan Billi
- Kraan SaniSupreme
- Kraan Deante
- Kraan Omnires
- Kraan Vola
- Kraan Zip
- Kraan The Galley
- Kraan Viidako
- Kraan Waltec
- Kraan Fantini
- Kraan Oliveri
- Kraan Rogerseller
- Kraan Axor
Nieuwste handleidingen voor Kraan
25 April 2024
25 April 2024
9 April 2024
3 April 2024
3 April 2024
22 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
20 Maart 2024