Sussex BLBM Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Sussex BLBM (1 pagina's) in de categorie Kraan. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
3.0
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterrat ing.gov.au
The mo re
stars the mo re
water efcient
1/2" BSP Fittings
with conical Seals FLEXIBLE HOSES
CLAMP
FIXING
NUT
Hole Size
32-35mm
50mm Max.
Bench thickness
BASE
O RING
Product code
Installation guidelines
Plumber note
Suba
- The Mixer is supplied assembled, only the Fixing nut and the Clamp need to be removed.
- After removing the mentioned parts, lower the Mixer on to the mounting surface and fit the Flexible Hoses.
- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then
attached. (Tighten using appropriate spanner)
- After securing the Flexible Hoses, fit Clamp and attach the Fixing Nut from underneath.
- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is properly centered over the
mounting surface hole.
- The Mixer mounting surface must be completely sealed and water-tight.
- The 1/2” Fittings of the Flexible Hoses have a conical seal, ensure that the matching threads are cut square
and burr free.
- Prior to connecting the Flexible Hoses, ensure all pipework is thoroughly flushed and ensure pipework is free
of any dirt or debri.
- Isolating Stop Valves are recommended with all installations. (not supplied)
- Connect the Flexible Hoses to Hot and Cold pipework fittings, ensure the Hoses do not kink or become twisted
when tightening.
- Check all fittings and connections are secure and water-tight.
- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.
(STATIC TEST)
- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.
- At the completion of testing, do not relieve any high water pressure by operating the Mixer.
- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the
manufacturers warranty.
BBM Basin mixer
BEBM85 Extended basin mixer 85mm outlet
BEBM125 Extended basin mixer 125mm outlet
BLBM Lever basin mixer
BLEBM85 Lever extended basin mixer 85mm outlet
BLEBM125 Lever extended basin mixer 125mm outlet
Basin mixer
sussextaps.com.au
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.
Product specificaties
| Merk: | Sussex |
| Categorie: | Kraan |
| Model: | BLBM |
Heb je hulp nodig?
Als je hulp nodig hebt met Sussex BLBM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kraan Sussex
13 Maart 2024
12 Maart 2024
12 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
Handleiding Kraan
- Kraan IKEA
- Kraan Etna
- Kraan Inventum
- Kraan Brita
- Kraan Delta
- Kraan Ernesto
- Kraan Franke
- Kraan Grohe
- Kraan Hansgrohe
- Kraan Hotto
- Kraan KitchenAid
- Kraan Livarno
- Kraan Lynx
- Kraan Miomare
- Kraan Quooker
- Kraan Smeg
- Kraan Stiebel Eltron
- Kraan Teka
- Kraan Blanco
- Kraan Caple
- Kraan CDA
- Kraan Curaqua
- Kraan Schütte
- Kraan Lamona
- Kraan Nodor
- Kraan Empire
- Kraan Brauer
- Kraan Elkay
- Kraan Oras
- Kraan Berg
- Kraan Mizzo
- Kraan ZLine
- Kraan Mueller
- Kraan Aloni
- Kraan WillieJan
- Kraan Everpure
- Kraan Sani-Lav
- Kraan Fala
- Kraan Neo
- Kraan Lomazoo
- Kraan American Standard
- Kraan Livarno Lux
- Kraan Billi
- Kraan SaniSupreme
- Kraan Deante
- Kraan Omnires
- Kraan Vola
- Kraan Zip
- Kraan The Galley
- Kraan Viidako
- Kraan Waltec
- Kraan Fantini
- Kraan Oliveri
- Kraan Rogerseller
- Kraan Axor
Nieuwste handleidingen voor Kraan
25 April 2024
25 April 2024
9 April 2024
3 April 2024
3 April 2024
22 Maart 2024
21 Maart 2024
21 Maart 2024
21 Maart 2024
20 Maart 2024