StarTech.com ST20000SPEXI Handleiding

StarTech.com Netwerkkaart/adapter ST20000SPEXI

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com ST20000SPEXI (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 10/13/2017

For the latest information, technical specications, and support for

this product, please visit .www.startech.com/ST20000SPEXI

Packaging contents

• 1 x PCI Express® 10GBase-T Ethernet network card

• 1 x low-prole bracket

• 1 x quick start guide

System requirements

• PCI Express enabled computer with an available PCI Express slot

(x8 or x16)

• Any of the following operating systems:

• Microsoft® Hyper-V®

• Windows® 7 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows 10 (32-bit or 64-bit)

• Windows Server® 2003

• Windows Server 2008 R2

• Windows Server 2012

• Linux® kernel 2.6. and 3.x x

Note: Operating system requirements are subject to change. For the

latest requirements, please visit www.startech.com/ST20000SPEXI.

ST20000SPEXI

2-port PCI Express 10GBase-T Ethernet network card

*actual product may vary from photos

Installation

Install the PCI Express card

WARNING!

PCI Express cards can be severely damaged by static electricity. Make

sure that you’re properly grounded before you open your computer

case or touch your PCI Express card. You should wear an anti-static

strap when you install any computer component. If an anti-static

strap isn’t available, discharge any built-up static electricity by

touching a large grounded metal surface for several seconds. Only

handle the PCI Express card by its edges and don’t touch the gold

connectors.

1. Turn o your computer and any peripherals that are connected

to your computer (for example, printers, external hard drives, and

so on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

5. Locate an open PCI Express slot and remove the corresponding

metal cover plate from the back of the computer case. Consult

the documentation that came with your computer for details

about how to do this safely. This card works in PCI Express slots of

additional lanes (x8 or x16 slots).

6. Gently insert the card into the open PCI Express slot and fasten

the bracket to the back of the case.

Note: If you install the card into a small form factor or a low-prole

desktop system, it may be necessary to replace the preinstalled

standard-prole bracket with the included low-prole (half height)

installation bracket.

7. Place the cover back onto your computer case.

8. Reconnect the power cable to the back of your computer.

9. Reconnect all of the peripheral devices that you disconnected in

step 3.

10. Turn on your computer.

Install drivers on a computer running Windows

1. If the Found New Hardware dialog box appears on your screen,

close the dialog box or click Cancel.

2. To download the latest drivers, navigate to www.StarTech.com

and enter in the eld.ST20000SPEXI Search

3. Click .Support

4. Download the driver.

5. When the download is complete, double-click the appropriate

driver for the version of Windows that you’re running and follow

the on-screen instructions to complete the installation.

Product diagram

Ethernet port

PCIe p1-x8

connector

Link speed LED

Link state and activity LED

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

About LEDs

There are two LEDs next to each of the two Ethernet ports on the

network card.

Consult the tables below for more information about what the LED

behavior signies.

Link speed LEDs

LED behavior Scenario

Amber LED is illuminated. Link speed is 10 G.

Green LED is illuminated. Link speed is 1 G.

No LED is illuminated. Link speed is 100 m.

Link state and activity LEDs

LED behavior Scenario

Green LED is illuminated and

not blinking.

Network port is connected.

Green LED is illuminated and

blinking.

Network port is active.

Product specificaties

Merk:	StarTech.com
Categorie:	Netwerkkaart/adapter
Model:	ST20000SPEXI
Kleur van het product:	Black, Stainless steel
Gewicht:	160 g
Breedte:	20 mm
Diepte:	163 mm
Hoogte:	120 mm
Gewicht verpakking:	242 g
Breedte verpakking:	208 mm
Diepte verpakking:	147 mm
Hoogte verpakking:	40 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Activity, Speed
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Interface:	Ethernet
Duurzaamheidscertificaten:	CE, RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,1000,100 Mbit/s
Bekabelingstechnologie:	10/100/1000BaseT(X)
Netwerkstandaard:	IEEE 802.3ad, IEEE 802.3q, IEEE 802.3u, IEEE 802.3an, IEEE 802.3az, IEEE 802.3ab
Temperatuur bij opslag:	-20 - 60 °C
Intern:	Ja
Naleving van duurzaamheid:	Ja
Ondersteunt Linux:	Ja
Hostinterface:	PCI Express
Maximale overdrachtssnelheid van gegevens:	20000 Mbit/s
Ondersteunde server operating systems:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Jumbo Frames ondersteuning:	Ja
Full duplex:	Ja
Chipset:	Intel - X540
(Buitenste) hoofdverpakking hoogte:	308 mm
(Buitenste) hoofdverpakking breedte:	420 mm
(Buitenste) hoofdverpakking lengte:	430 mm
Hoeveelheid per (buitenste) hoofdverpakking:	40 stuk(s)
Auto MDIX IEEE:	Nee
Auto-negotiation:	Ja
Wake-on-LAN:	Ja
Bedrijfstemperatuur (T-T):	5 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Code geharmoniseerd systeem (HS):	85176990
Jumbo frames:	15000
VLAN-tagging:	Ja
Low-profile bracket:	Ja