Sony MSZ-2100G Handleiding
Sony
Niet gecategoriseerd
MSZ-2100G
Bekijk gratis de handleiding van Sony MSZ-2100G (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 3.5 sterren uit 2.5 reviews. Heb je een vraag over Sony MSZ-2100G of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Usage Precautions
M-0010_v001-000_5-017-112-01(1)_201911051002_GB_40/41
Notes
• Always make a test recording, and verify that it was recorded
successfully. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS
RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER
MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly before use. SONY
WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING,
BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE
TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY
USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE LOSS, REPAIR, OR
REPRODUCTION OF ANY DATA RECORDED ON THE INTERNAL
STORAGE SYSTEM, RECORDING MEDIA, EXTERNAL STORAGE
SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION OR
DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT
MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.
M-A110-00_v004-000_5-017-112-01(1)_201911051002_GB_41/41
5-019-390- (1)11
© 2020 Sony Corporation
MULTISPECTRAL
SENSING UNIT
MSZ-2100G
Operating Instructions
Overview
This is the MULTISPECTRAL SENSING UNIT, consisting of the MULTISPECTRAL
CAMERA (hereafter referred to as the "camera"), which simultaneously captures
images in the visible spectrum and near infrared spectrum, and the GNSS
SENSOR UNIT (hereafter referred to as the "sensor unit"), which consists of the
GNSS, IMU, and light sensor.
Note
The MULTISPECTRAL SENSING UNIT is a dedicated device that combines the
camera and sensor unit, and is used along with the Fast Field Analyzer
application software.
See the "Operation Guide" (PDF) for details on how to operate this device.
Make sure to contact the retailer where the product was purchased for details on
installation.
Manual Structure
Documentation for the unit comprises the following four manuals.
Safety Regulations (Supplied)
Describes the important points for safe use of the unit.
Be sure to read it.
Operating Instructions (this document)
Describes the names of the various parts of the unit, and connection, and
operation methods.
Operation Guide (PDF)
This guide includes information on overall operations, including how to
operate the device, install the software, and troubleshooting.
Fast Field Analyzer User Guide (PDF)
This guide contains information on how to use the Fast Field Analyzer.
Part Names and Functions
Camera
2
1
3
4
5
6
7
8
9
6
microSD card cover
Open this to insert a microSD card.
Caution
Do not pull on the cover with excessive force. Doing so could damage the
cover.
Access indicator
This flashes when reading from/writing to the microSD card.
Caution
Do not remove the microSD card or disconnect the power cord when the
access indicator is flashing. Doing so could corrupt the data on the microSD
card.
microSD card slot
Insert a microSD card here.
Lenses (right side: RGB, left side: RED/NIR)
Right side: this part photographs the RGB spectrum (visible light spectrum).
Left side: this part photographs the RED spectrum (red wavelength
spectrum) and NIR spectrum (near infrared spectrum).
Caution
Remove the lens caps before shooting. Take care not to lose the caps after
removing them.
The lenses cannot be changed. The lenses are fixed in place. Do not forcibly
rotate them.
Do not directly touch the surface of the lenses.
Use a blower or a soft, clean cloth to lightly wipe the lenses if they are dirty.
Never use organic solvents such as benzene or thinners to clean the lenses.
Shutter button
This is linked to the sensor unit shutter button. (See " Shutter button" of
the sensor unit)
Camera mounting screw holes (×8)
These are used to secure the camera. (M2, thread depth 3.5 mm)
Caution
Use screws with a thread depth of less than 3.5 mm from the device
mounting surface.
Take care to ensure that the screws are not tightened beyond a depth of
3.5 mm. Doing so could damage the internal mechanisms of the camera,
resulting in malfunction.
EXT connector
This is used to connect the device to the sensor unit with the supplied
connecting cable.
Status indicator
This shows the camera and the sensor unit status. (See "Status indicator
display (for the camera and sensor unit)", and "Operation Guide" (PDF))
DC IN 5V connector (DC power supply input connector)
This is used to connect to a 5 V DC power supply.
Sensor unit
3
2
4
1
5
6
GNSS (Global Navigation Satellite System) antenna
This can receive GPS satellite/GLONASS satellite signals.
See the "Operation Guide" (PDF) for instructions on how to receive signals on the
sensor unit.
Shutter button
Press to start/stop shooting.
This is linked to the camera shutter button, therefore either button can be
used.
Status indicator
This shows the sensor unit and the camera status. (See "Status indicator
display (for the camera and sensor unit)" , and "Operation Guide" (PDF))
Light sensor
Caution
Make sure to keep the white receptor surface clean in order for the light
sensor to function correctly. If the surface becomes dirty with oil, water or
fingerprints, wipe them off right away with a soft cloth.
HOST connector
These are used to connect to the camera with the supplied connecting
cable.
Sensor unit mounting screw holes (×6)
These are used to secure the sensor unit. (M2, thread depth 3.5 mm)
Caution
Use screws with a thread depth of less than 3.5 mm from the device
mounting surface.
Take care to ensure that the screws are not tightened beyond a depth of
3.5 mm. Doing so could damage the internal mechanisms of the camera,
resulting in malfunction.
Status indicator display (for the camera and sensor unit)
Indicator Status
Flashing green Awaiting GNSS signal, sensor unit connection error
Flashing red microSD card error (not inserted, full, card malfunction)
See the "Operation Guide" (PDF) for indicator display other than the above.
Specifications
System (camera)
Imaging element (RGB):
1/2.3-type Exmor R CMOS image sensor
Effective pixel count: approx. 12 million
Imaging element (RED/NIR):
1/2.8-type Exmor R CMOS image sensor
Effective pixel count: approx. 518,000
Lens (both RGB and RED/NIR):
F no.: f/2.2
f (focal length): f = 6.04 mm
Angle of view (horizontal): approx. 52.1°
Camera functions:
Shutter speed
Interval
See the "Operation Guide" (PDF) for details on how to configure
camera functions.
Recording format:
Still images: compressed RAW (RGB)/uncompressed RAW
(RED/NIR)
Make sure to use the dedicated Fast Field Analyzer
software application.
Recording media:
microSD memory cards (SDHC, Class 10 and above)
Capacity: 5 GB or more
Only use the a card with sufficient capacity (32 GB or more) after it
has been formatted using FAT 32. For further details see the
“Operation Guide” (PDF).
System (shared)
Main unit display:
Camera: status indicator, access indicator
Sensor unit: status indicator
Controls: Camera: shutter button
Sensor unit: shutter button
Input/output connectors:
Camera: multi/micro USB jack x 2 (dedicated
communication port, dedicated power supply port)
Sensor unit: multi/micro USB jack x 1 (dedicated
communication port)
Power supply
Supply voltage:
DC IN 5V connector (micro USB) input (+5 V DC ±5%)
Power supply method:
USB power supply (DCP) 1.0 A or higher
Power consumption:
Approx. 4.5 W (for interval shooting, camera + sensor unit)
Others
Operating temperature: 0 °С to 40 °С (32 °F to 104 °F)
Storage temperature: –20 °С to +60 °С (–4 °F to 140 °F)
Operating humidity: 20% to 80% (no condensation allowed)
Storage humidity: 20% to 80% (no condensation allowed)
Dimensions:
Camera: approx. 59×41×45.4 mm
(approx. 2
3
/ ×1 8
5
/ ×1 8
13
/ in.)16
Sensor unit: approx. 69×41×16.9 mm
(approx. 2
3
/ ×1 4
5
/ ×8
11
/ in.)16
Connecting cable: approx. 400 mm (approx. 15
3
/ in.)4
Mass: Ca
mera: approx. 109 g (approx. 3.8 oz)
(excluding lens caps and memory card)
Sensor unit: approx. 56 g (approx. 2.0 oz)
Connecting cable: 16.5 g (approx. 0.58 oz)
Supplied accessories
Connecting cable (1)
Lens caps (2)
Safety Regulations (1)
Design and specifications of the product and accessories are subject
to change without notice.
Dimensions
Camera
40 (1
5
/ )8
40 (1
5
/ )8
2-M2, 3.5 depth
2-M2, 3.5 depth
Label area
4-M2, 3.5 depth
59 (2
3
/ )8
0.5
(
1
/ )32
38 (1
1
/ )2
30 (1 3/ )16
45.4 (1
13
/ )16
27.2 (1
1
/ )8
41 (1 5/ )83.5
(5/ )32
3.5
(5/ )32
Whole circumference 1°
Whole circumference 1°
Sensor unit
4° 4°
69 (2
3
/ )4
58 (2
3
/ )8
1
(
1
/ )16
30 (1
3
/ )16
6-M2, 3.5 depth
41 (1 5/ )8
0.5
(1/ )32
16.9 (11/ )16
22 (7/ )8
35.4 (1 7/ )16
GNU GPL/LGPL applied software
The software that is eligible for the following GNU General Public License
(hereinafter referred to as “GPL”) or GNU Lesser General Public License
(hereinafter referred to as “LGPL”) are included in the unit. This informs you that
you have a right to have access to, modify, and redistribute source code for these
software programs under the conditions of the GPL/LGPL.
Source code is provided on the web. Use the following URL to download it.
http://oss.sony.net/Products/Linux
We would prefer you do not contact us about the contents of source code.
Trademarks
Exmor is a trademark of Sony Corporation.
microSD is a trademark of SD-3C, LLC.
All other system names and product names are registered trademarks or
trademarks of their respective owners. Further, the ® or ™ symbols are not used in
this document.
Unit: mm (in.)
Unit: mm (in.)
Product specificaties
| Merk: | Sony |
| Categorie: | Niet gecategoriseerd |
| Model: | MSZ-2100G |
Heb je hulp nodig?
Als je hulp nodig hebt met Sony MSZ-2100G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Sony
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
Handleiding Niet gecategoriseerd
- LECO
- Vornado
- MIOPS
- Tognana
- Strymon
- Götze & Jensen
- Lionelo
- iAXBi
- Ultimate Support
- Auna
- Casr
- Sunset
- Nofred
- IXS
- Lindemann
Nieuwste handleidingen voor Niet gecategoriseerd
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025