Sauermann Si-ATE320 Handleiding
Pagina's 3 Niet gecategoriseerd
Bekijk de handleiding van Sauermann Si-ATE320 gratis online of download de PDF. Deze handleiding is 11 keer bekeken. Vraag over dit model? Stel een vraag
Si-ATE320
Flush-mount display
DATA SHEET
FEATURES
• RS485 MODBUS protocol
communication
• IP 66, VHP* resistant
• 30 pre-programmed units and custom
units
Graphic Touch display
Display of 1 to 3 parameters
Visual and acoustic alarms
EXAMPLES OF APPLICATION
Critical environments that require accurate
monitoring of differential pressure and
other key air parameters (clean rooms,
operating rooms, labs, prodution sites...)
Air parameters monitoring (in glove boxes,
fume hoods, isolation cabinets, liquid lling
machines...)
Monitoring the differential pressure,
relative humidity/temperature and
environmental CO
2
levels in labora-
tories where incubators are used
*Vaporized Hydrogen Peroxide
The are a good solution to integrate the measured by other ush-mount displaysvisualisation of the parameters
sensors/transmitters into a single display device and, simultaneously, transfer these measurements to a BMS or Scada
through modbus RTU.
TABLE OF THE PRE-PROGRAMMED UNITS
TOUCH
SCREEN
DomainUnitsResolution
PressurePa, mmH
2
O, inwg, mbar, mmHg, daPa, kPa, hPa
1 / 0.1 / 0.01 / 0.001 / 0.0001 / 0.00001
Hygrometry%RH, g/m³ g/kg, kJ/kg, °C
td
, °F
td
, °C
tw
, °F
tw,
°C
tf
, °F
tf
Temperature°C, °F
Air velocitym/s, fps
Airowm³/h, l/s, m³/s, dam³/h, cfm
Gas concentrationppm, ppm, ppb
Air change rateACH
Product specificaties
| Merk: | Sauermann |
| Categorie: | Niet gecategoriseerd |
| Model: | Si-ATE320 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sauermann Si-ATE320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden