Planet GSD-1603 Handleiding

Bekijk gratis de handleiding van Planet GSD-1603 (4 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 48 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Planet GSD-1603 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Check your package for the following items:

GSD-1603 x 1DC 12V,

1A Power Adapter x 1User’s Manual x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them again

to repack the product in case there is a need to return it to

us for repair.

Hardware Features

Made of metal, desktop size and wall-mount design

LED indicators for system power, per port Link/Act

12V DC, 1A external power adapter

FCC, CE Class B compliant

6. Installing the Switch

This part describes how to install your GSD-1603 Gigabit

Ethernet Switch and make connections to it. Please read

the following sections and perform the procedures in the

order being presented.

Note: This GSD-1603 Gigabit Ethernet Switch does not

need software conguration.

Desktop Installation

To install the GSD-1603 on desktop, simply follow the

following steps:

Step 1:Place the GSD-1603 on the desk near a power

source.

Step 2:Keep some ventilation space between the

GSD-1603 and the surrounding objects.

Note

When choosing a location, please keep in mind

the environmental restrictions discussed in

Chapter 7 under Product Specifications.

Step 3:Connect your GSD-1603 to network devices.

A.Connect one end of a standard network cable

to the 10/100/1000BASE-T RJ45 ports on the

rear panel of the GSD-1603.

4. LED Indicators

System

LED ColorFunction

PWR Green

Lights Indicates that the Switch is powered

ON.

Off Indicates that the Switch is powered

OFF.

Per 10/100/1000Mbps Port

LED ColorFunction

Link/

ACT Green

Lights

Indicates the link through that

port is successfully established at

10/100/1000Mbps.

Blinking

Indicates the Switch is actively

sending or receiving data over

that port.

2. Product Features

Physical Port

16-Port 10/100/1000BASE-T Gigabit Ethernet ports

Supports auto MDI/MDI-X function

Layer 2 Features

Complies with IEEE802.3, 10B-T, IEEE ASE 802.3u

100BASE-TX, IEEE802.3ab 1000B-T Ethernet stan ASE-

dards

Features Store-and-Forward mode with wire-speed

ltering and forwarding rates

 Integrated address look-up engine, supporting 8K

absolute MAC addresses

9K Jumbo packet support

IEEE 802.1Q VLAN packet transparent support

IEEE 802.3x ow control for full duplex operation and

backpressure for half duplex operation

Hardware based 10/100B-TX, half/full duplex and ASE

1000BASE-T full duplex mode, ow control and auto-

negotiation

Automatic address learning and address aging

Supports CSMA/CD protocol

3. Switch Front Panel

Figure 3-1 shows the front panel of the GSD-1603

Figure 3-1: GSD-1603 Front Panel

5. Switch Rear Panel

Figure 5-1 shows therear panel of the GSD-1603

Figure 5-1: GSD-1603 Rear Panel

Power

Notice

1. The device is a power-required device,

meaning it will not work till it is powered. If

your networks should be active all the time,

please consider using UPS (Uninterrupted

Power Supply) for your device. It will prevent

you from network data loss or network

downtime.

2. In some areas, installing a surge suppression

device may also help to protect your Switch

from being damaged by unregulated surge or

current to the Switch or the power adapter.

B. Connect the other end of the cable to the

network devices such as printer servers,

workstations, routers, etc.

Step 4:Supply power to the GSD-1603.

A.Connect one end of the power cable to the

GSD-1603.

B. Connect the 12V DC power adapter to a

standard wall outlet.

When the GSD-1603 receives power, the Power LED should

remain solid Green.

PC/Laptop

xDSL/Cable RouterInternet

12V Power Adapter

RJ45

RJ45

Power

Product specificaties