Planet WGS-810 Handleiding

Bekijk gratis de handleiding van Planet WGS-810 (3 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Planet WGS-810 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 8-port 10/100/1000T Wall-

mounted Gigabit Ethernet Switch.

In the following sections, unless specied, the term “Wall-mount

Gigabit Switch” mentioned in this user’s manual refers to the

above model.

Open the box of the Wall-mount Gigabit Switch and carefully

unpack it. The box should contain the following items:

The Wall-mount Gigabit Switch x 1User’s Manual x 1

Wall-mounted Kit x 1Magnet Kit x 1RJ45 Dust Cap x 8

2. Hardware Description

2.1 Switch Front View

The front panel of the Wall-mount Gigabit Switch consists of 8

auto-sensing 10/100/1000Mbps Ethernet RJ45 ports. The LED

indicators are also located on the RJ45 ports of the Wall-mount

Gigabit Switch.

WGS-810 Front View

3 421

7 865

PWR

ACTLNK

DC Input Range

12V

, 1A max.

Standard

VLAN

Extend

Uplink

ACTLNK

Figure 2-1: WGS-810

3. Installation

3.1 Wall-mount Installation

To install the Wall-mount Gigabit Switch on the wall, simply follow

the following steps:

Step 1:Place the Wall-mount Gigabit Switch on the wall and

mark the four holes with a pencil.

133mm

Ø4mm

Ø8mm

6mm

Step 2-1:Hammer the anchors provided into the four holes and

use the four screws to tightly x the switch onto the

wall by screwing them.

PoE+

34

2

1

7 8

6

5

Uplink

60W

PoE Usage

45W

30W

15W

PWR

CT

LNK

Po n-U

se

ACTLNK

DC Input Range

48-56V

, 1.5A max.

Standard

VLAN

Exten

d

2.3 DIP Switch

The front panel of Wall-mount Gigabit Switch provides one DIP

switch for and mode selections. The Standard, VLAN Extend

detailed descriptions are shown in the following table.

DIP Switch ModeFunction

Standard

VLAN

Extend

This mode makes the Wall-mount Gigabit

Switch operate as a general switch and all

ports operate at 10/100/1000Mbps auto-

negotiation.

Standard

VLAN

Extend

This mode makes the Wall-mount Gigabit

Switch operate as a switch VLAN isolation

and

1. Port 1to will isolate respectively.port 6

2. Port 1 to port 6 can only communicate

with port 7 and port 8(uplink port).

Standard

VLAN

Extend

This mode makes the Wall-mount Gigabit

Switch operate as a VLAN isolation switch and

1. Port 1 to port 6 will isolate respectively.

2. Port 1 to port 6 can only communicate

with port 7 and port 8(uplink port).

3. Transmission distance of 250m at speed of

10Mbps.

Note

Please reboot the Wall-mount Gigabit Switch after

adjusting the DIP switch.

Power Adapter x 1DIN-rail Kit x 1

If any item is found missing or damaged, please contact your local

reseller for replacement..

2.2 LED Indicators

System and Ports

LED ColorFunction

PWRGreenLights to indicate that the Switch has power.

LNK/

ACT Green

Lights To indicate the link through that port is

successfully established.

Blinks

To indicate that the switch is actively

sending or receiving data over that

port.

2.4 Physical Dimensions

W x D x H: 148 x 24.2 x 134 mm

3 421

7 865

PWR

ACTLNK

DC Input Range

12V

, 1A max.

Standard

VLAN

Extend

Uplink

ACTLNK

Step 2-2: Or the switch, shown in the picture below, can be hung

on the wall by screwing the two screws leaving a space

of 2mm apart after the anchors are hammered in.

2mm

M4 Screw

PoE+

342

1

786

5

Uplink

60W

PoE Us age

45W

30W

15W

PWR

ACT

LNK

PoE-in-Use

ACTLNK

DC Input Range

48-56V

, 1.5A

max.

Standard

VLAN

Extend

3.2 DIN-rail Mounting Installation

The DIN-rail kit is included in the Wall-mount Gigabit Switch

package. To hang up the Wall-mount Gigabit Switch, follow the

steps below:

Step 1:Screw the DIN-rail bracket on the Wall-mount Gigabit

Switch.

Product specificaties