La Crosse Technology 30016 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 30016 (4 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Please read this before operating your clock
1.8” LED TILT ALARM CLOCK
Model 30016 / 30017
Features
tw-&%5*-5EJTQMBZ
t%JTQMBZUJMUT¡GPSXBSEBOE¡CBDLXBSE
t)J-PEJTQMBZEJNNFS
t3FQFBU.JOVUFTOPP[F
t3FRVJSFTPOF7CBUUFSZGPSCBDLVQ
t"$7)[&5-BQQSPWFE
PM Indicator Light
Alarm Indicator Light
Time Display
HOUR Button
SNOOZE Button
Battery Door
HI / LO Dimmer Switch
HI / LO / OFF Alarm Switch
MINUTE Button
TIME Button
ALARM Button
PM
AL
SNO OZE
Power Supply
* Begin by plugging in the power cord into a standard household outlet.
The display will ash indicating the time is ready to be set.
Setting The Time
* Hold down the
TIME
button and then press
HOUR
button to set the correct hour
.
The PM indicator will light when the hour is advanced into the PM time.
* Hold down the
TIME
button and then press
MINUTE
button to set the correct minute.
* Release the
TIME
button when the correct time is shown on display.
HILOOF F
DIM M ER
HI G HLO W
www.equitybylacrosse.com/support
Using The Snooze
* Press the button when the alarm sounds will stop the alarm and SNOOZE
the alarm will sound again in nine minutes.
* The snooze function can be repeated many times.
Using The Display Dimmer Switch
* Slide the display dimmer switch to position for brighter display.HI/LO HI
* Slide the display dimmer switch to position for normal display.HI/LO LO
Battery Backup
* Insert one 9V battery into the battery compartment at the back of the clock.
The battery will keep the alarm and time settings until the power is restored.
The LED display will not light-up but the alarm will sound at the preset alarm time.
If there is no battery installed but the power is interruped,
the display will ash at 12:00 and the time and alarm need to be set again.
Battery Warning
Clean the battery contacts and also those of the device prior to battery installation. Follow the polarity
(+) and (-) when inserting battery.
FCC INFORMATION:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Setting The Alarm
* Hold down the
ALARM
button and then press
HOUR
button to set the correct hour
.
The
PM
indicator will light when the hour is advanced into the PM time.
* Hold down the
ALARM
button and then press
MINUTE
button to set the correct minute.
* Release the ALARM
button when the correct alarm time is shown on display.
.
* Slide the
ALARM HI/LO/OFF
switch to
HI
position for loud alarm.
The alarm indication will appear on lower left side of display.
* Slide the
ALARM HI/LO/OFF
switch to
OFF
position to deactivate the alarm .
* Slide the
ALARM HI/LO/OFF
switch to
LO
position for normal alarm.
The alarm indication will appear on lower left side of display.
Using The Alarm
www.equitybylacrosse.com/support
Warning: Changes or modi cations to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment
1. Read Instructions-All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Water and Moisture - The appliance should not be used near water - for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,
and the like.
4. Ventilation - The appliance should be situated so that its location or position does not interfere
with its proper ventilation, For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings,or, place in a built-in installa-
tion, such as a bookcase or cabinet that may impede the ow of air through the ventilation
openings.
5. Heat - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including ampli ers) that produce heat.
6. Power Sources-The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
7. Grounding or Polarization- Precautions should be taken so that the grounding or polarization
means of an appliance is not defeated.
8. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the appliance.
9. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
10. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
11. Damage Requiring Service - The appliance should be serviced by quali ed service personnel
when:
A. The power -supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to quali ed service personnel.
Safety Instructions
Please help in preservation of the environment and return used batteries to an authorized depot.
Remove the battery from the clock if you do not intend to use for an extended period of time.
www.equitybylacrosse.com/support


Product specificaties

Merk: La Crosse Technology
Categorie: Wekkerradio
Model: 30016

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 30016 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio La Crosse Technology

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio