Kuzco Solo FM9304 Handleiding

Bekijk gratis de handleiding van Kuzco Solo FM9304 (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Kuzco Solo FM9304 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION SHEET

FM9304

Square LED Flush Mount

START FROM HERE

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W

20190619

: kuzcolighting.com

• Make sure is POWERCOMPLETELY OFF at the fuse box

• Have your fixture installed by a qualified licensed electrician

• Prepare everything in a clear area

• Wear gloves at all time during this installation

• Read instructions carefully before you start assembly

• Keep this installation sheet for future reference

Technical Support: 1-855-855-8926

Please Note:

• This Kuzco LED fixtures come with pre-wired LED module(s)

• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary

contact with the module could cause permanent damage

• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application

1. Remove fixture from its original package

2. Separate mounting plate and mounting bar from (1c)(1e)

fixture (3a)(2b) by removing set screws using Allen key

3.Attach mounting plate to electrical junction box (1c)(1a)

using screws provided in hardware package(1d)

4. Make proper electrical connections (black to hot “L”, white

to neutral “N”, ground to “GND”) with wire nuts (1b)

provided in hardware package

5. Attach mounting bar to mounting plate using (1e)(1c)

screws provided (1f)

6. Attach fixture to mounting bar , secure with set (3a)(1e)

screws using Allen key (2b)

1a.

1b.

1d.

1c.

2b.

1e.

1f.

3a.

Product specificaties