Klein Tools CL3000 Handleiding

Bekijk gratis de handleiding van Klein Tools CL3000 (12 pagina’s), behorend tot de categorie Meetapparatuur. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.1 sterren uit 5 reviews. Heb je een vraag over Klein Tools CL3000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction

Manual

ENGLISH

www.kleintools.com

For Professionals...Since 1857

®

Instruction

Manual

CL3000

•DATA HOLD

•BACKLIGHT

•RELATIVE

READING

•AUTO / MANUAL

RANGE

•3-3/4 DIGIT

3999 COUNT LCD

ENGLISH

69204

AUTO

V

DC

CL3000

Instruction Manual

GENERAL SPECIFICATIONS

The Klein Tools CL3000 is a multi-function fork meter. It measures AC / DC

voltage, AC current, resistance, capacitance, frequency, and duty cycle.

It can also test diodes and continuity.

•Operating Altitude: 2000 meters

•

Relative Humidity: 75% max

•

Operating Temperature:0°C / 32°F to 40°C / 104°F

•

Storage Temperature:-10°C / 14°F to 50°C / 122°F

•

Accuracy Temperature:18°C / 64°F to 28°C / 2°F

•

Beyond Accuracy Temperature: 0.1*(specified accuracy) / ° C

•

Sampling Frequency: 3 samples per second

•

Jaw size: 12mm max conductor size

•

Dimensions: 7.5" x 2.7" x 1.7"

•

Weight: 7.4 oz.

•

Calibration: Accurate for one year

•

CAT Rating: CAT III 600V

•

Accuracy: ± (% of reading + # of least significant digits)

WARNINGS

To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

•Before each use, verify meter operation by measuring

a known voltage or current.

•Never use the meter on a circuit with voltages that exceed the category based

rating of this meter.

•Do not use the meter during electrical storms, or in wet weather.

•Do not use the meter or test leads if they appear to be damaged.

•Ensure meter leads are fully seated, and keep fingers away from

the metal probe contacts when making measurements.

•Do not open the meter to replace batteries while the probes

are connected.

•Use caution when working with voltages above 60V DC,

or 25V AC RMS. Such voltages pose a shock hazard.

•To avoid false readings that can lead to electrical shock,

replace batteries if a low battery indicator appears.

•Unless measuring voltage or current, shut off and lock out

power before measuring resistance or capacitance.

•Always adhere to local and national safety codes. Use individual protective

equipment to prevent shock and arc blast injury where hazardous live

conductors are exposed.

SYMBOLS

~

AC Alternating CurrentWarning or Caution

DC Direct CurrentDangerous levels

DC/AC Voltage or CurrentDouble Insulated Class II

GroundAC Source

Product specificaties