Indesit EWDE 861483 S UK Handleiding

Indesit Wasdroger EWDE 861483 S UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit EWDE 861483 S UK (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Quick Guide
In order to receive a more complete assistance,
please register your product on
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed.
For more detailed instructions on how to remove them, see the Installation Guide.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
Compartment 1: Do not pour detergent into the
compartment . 1
Detergent should only be poured into the
compartment .2
Compartment 2: Washing detergent (powder
or liquid)
Liquid detergent should only be poured in
immediately prior to the start of the wash cycle.
Compartment 3: Additives (fabric softener,
The fabric softener should not overow the grid.
Note: If a “tablet detergent” is used, always follow the manufacturer’s
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
Maximum load 8 kg
Power input in o mode 0.5 W / in left-on mode 8 W Detergents and
Additives Recommended
dampness %
Total water lt
temperature °C
Wash cycle Temperature Max.
spin speed
load for
(h : m)
load for
Wash Fabric
Setting Range 2 3
1 Mix Colours 59 40 °C - 40 °C 1000 8,0 * 6,0   – –
2 Synthetics 59’ 30°C - 30 °C 1000 3,5 * 3,5   – –
3 Cotton 45 40 °C - 40 °C 1200 4,5 * 4,5   – –
4 Wash&Dry 90’ 30°C 30°C 1200 2,0 * 2,0   – –
5 Wash&Dry 45’ 30°C 30°C 1400 1,0 * 1,0   – –
6 Cotton (2) 40 °C - 60 °C 1400 8,0 3:55 6,0 49 1,400 105 45
7 Synthetics (3) 40 °C - 60 °C 1200 4,0 2:55 4,0 35 0,800 55 43
8 Wool 40 °C - 40 °C 800 2,0 * 2,0   – –
9Eco 40-60 (1)
(Wash) 40 °C 40°C
1351 8,0 3:30
53 0,770 54 33
1351 4,0 2:45 53 0,650 52 36
1351 2,0 2:10 53 0,450 37 33
10 20°C 20 °C - 20 °C 1400 8,0 1:50 6,0   49 0,160 90 22
11 White 60°C - 90 °C 1400 8,0 2:45 6,0 49 0,900 90 55
12 Cotton Dry 6,0 * 6,0 – – – –
13 Synthetics Dry 4,0 * 4,0 – – – –
14 Rinse 1400 8,0 * 6,0 – – – – –
15 Spin 1400 8,0 * 6,0 – – – –
16 Drain 8,0 * 6,0 – – – –
  Required dosage Optional dosage
9Eco 40-60 (4)
(Wash & Drying) 40 °C 40 °C 1351 6.0 9:20 6.0   0 3,800 75 33
1351 3.0 5:10 3.0   0 1,980 47 32
7 6
1. ON/OFF button
3. OPTION buttons and indicator lights
4. START/PAUSE button and indicator light
5. DRYING button
6. SPIN button
8. Detergent dispenser drawer
For all testing institutes:
2) Long cotton cycle: set programme 6 at temperature 40°C.
3) Long synthetics cycle: set cycle 7 at a temperature of 40°C.
* The duration of the wash cycles can be checked on the display.
** After programme end and spinning with maximum selectable spin speed, in default
programme setting.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 (Wash) - Test wash cycle in compliance with EU Ecodesign regulation
2019/2014. The most ecient programme in terms of energy and water consumption for
washing normally soiled cotton laundry.
Note: spin speed values shown on the display can slightly diers from the values stated in
the table.
Eco 40-60 (Drying)-
Test drying cycle in compliance with EU Ecodesign regulation
. To access “wash and dry cycle select Eco 40-60” wash programme and set
“Drying” option level to
The most ecient programme in terms of energy and water
consumption for washing and drying normally soiled cotton laundry. At the end of cycle the
garments can be immediately stored to the cupboard.
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Mix Colours 59’
To wash mixed and coloured items together.
Synthetics 59
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Cotton 45’
short cycle designed to wash delicate cotton items.
Wash&Dry 90’
The cycle guarantees the washing and drying performances for a 2 kg
load in 90 minutes (level Iron dry); for larger loads, the cycle’s A1
duration increases in order to guarantee the cycle performances.
Wash&Dry 45’
Select programme 5 for washing and drying lightly soiled garments
(Cotton and Synthetic) in a short time. This cycle may be used to wash
and dry a laundry load of up to 1 kg in just 45 minutes (level Iron A1
dry). To achieve optimum results, use liquid detergent and pre-treat cus,
collars and stains.
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Specic for synthetic items. If the dirt is dicult to remove, the temperature
can be increased up to 60° and powder detergent can be used too.
All wool garments can be washed using programme 8, even those
carrying the “hand-wash only label. For best results, use special
detergents and do not exceed 2 kg of laundry.
Eco 40-60
For washing normally soiled cotton garments declared to be washable at 40 °C
or 60 °C, together in the same cycle. This is the standard cotton programme
and the most ecient in terms of water and energy consumption.
! The cycle runs only at 40°C as per regulation.
For washing lightly soiled cotton garments, at a temperature of 20 °C.
For heavily soiled whites and resistant colours.
Cotton Dry
Designed for drying cotton fabrics.
Synthetics Dry
Designed for drying Synthetics fabrics.
Designed for rinsing and spinning.
Designed to spin and drain the water.
Designed for draining the water.
The display is useful when programming the machine and provides a
great deal of information. B
The duration of the available programmes and the remaining time of a
running cycle appear in section ; if the DELAY TIMER option has been A
set, the countdown to the start of the selected programme will appear.
Furthermore, pressing the corresponding button allows you to view the
maximum temperature, spin speed and drying level or time values
attained by the machine during the selected cycle.
The phases scheduled for the selected cycle and, once the cycle has
begun, the current phase of the wash cycle (and drying cycle, if
applicable) appear in section .B
Spin / Drain
The icons corresponding to “temperature , “Drying” and “spin
appear in section from top to bottom:C
If the symbol lights up, the display will visualise the set temperature
The symbol lights up while the drying settings are being adjusted.
If the symbol lights up, the display will visualise the set “spin” value.
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door .
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened .
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the Auto
Clean cycle.
Prepare the laundry by following the suggestions appearing under the
- Press the ON/OFF button ; the START/PAUSE indicator light will
ash slowly green.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in “DETERGENT DISPENSER DRAWER”
- Close the door.
- Select the desired wash cycle.
- Set the washing temperature.
- Set the drying cycle if necessary.
- Select the desired options.
Press the START/PAUSE button.
The machine will lock the door ( symbol on) and the drum will start to
rotate; the door will be unlocked ( symbol o) and then locked again
( symbol on) as preparation phase of each washing cycle. The “Clicking”
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash amber. If the symbol is not lit, the door may be
opened . To start the wash cycle from the point at which it was
interrupted, press the START/PAUSE button again.
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash amber. If the symbol is not lit, the door may be
opened . Press the START/PAUSE button again to continue the cycle.
To change a wash cycle while it is in progress, pause the washer-dryer
using the START/PAUSE button (the relative indicator light will ash
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
Once the cycle terminates the indicator light will light up; when the END
symbol switches o, the door may be opened . Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF button,
the washer-dryer will switch o automatically after about a 10 minutes. .
Close the water tap, open the door and unload the washer-dryer. Leave the
door ajar to allow the drum to dry.
- If the selected option is not compatible with the programmed wash
cycle, the indicator light will ash and the option will not be activated.
- If the selected option is not compatible with another option which
has been selected previously, the indicator light corresponding to the
rst option selected will ash and only the second option will be
activated; the indicator light corresponding to the enabled option will
remain lit.
Extra Wash
Enable the
Extra Wash
option for very dirty items, where compatible.
Press this option to let the cycle automatically re-adjust all wash
parameters through a longer lasting cycle. The option always leaves the
temperature unchanged, while the spin cycle is automatically brought
back to maximum levels. The user can set the spin cycle back to the
desired value at any time.
Easy Iron
By selecting this function, the wash and spin cycles will be modied in
order to reduce the formation of creases. At the end of the cycle the
washing machine will perform slow rotations of the drum; the indicator
lights for the EASY IRON and START/PAUSE options will ash (the rst
one green, the second orange).
To end the cycle, press the START/PAUSE button or the EASY IRON button.
Note: If you also want to run the drying cycle, this option is enabled only
if combined with level ”(Iron dry).A1
Extra rinse
By selecting this option, the eciency of the rinse is increased and
optimal detergent removal is guaranteed. It is particularly useful for
sensitive skin.
Start Delay
To set a delayed start for the selected cycle, press the corresponding
button repeatedly until the required delay period has been reached.
When this option is enabled, the corresponding indicator light will remain
lit. To remove the delayed start setting, press the button until the text
“OFF” appears on the display.
Each wash cycle has a pre-dened temperature. To modify the
temperature, press the button. The value will appear on the display.
Each wash cycle has a pre-dened spin speed. To modify the spin speed,
press the button. The value will appear on the display.
Drying cycle
The rst time the button is pressed, the machine will automatically
select the maximum drying cycle which is compatible with the selected
wash cycle. Subsequent presses will decrease the drying level and then
the drying time, until the cycle is excluded completely (“OFF”).
Drying may be set as follows:
A - Based on the desired laundry dryness level:
Iron dry “A1”: suitable for clothes which will need ironing afterwards. the
remaining dampness softens creases, making them easier to remove.
Hanger dry “A2”: ideal for clothes which do not need to be dried fully.
Cupboard dry A3: suitable for laundry which can be put back in a
cupboard without being ironed.
Extra dry A4”: suitable for laundry which can be put back in a cupboard
without being ironed.
B 30 180 - Based on a set time period: between and minutes.
If your laundry load to be washed and dried is much greater than the
maximum stated load (see Wash Cycle Table), perform the wash cycle, and
when the cycle is complete, divide the garments into groups and put
some of them back in the drum.
At this point, follow the instructions provided for a cycle. Drying only
Repeat this procedure for the remainder of the load.
N.B: a cooling-down period is always added to the end of each drying cycle.
Drying only
Use the cycle selector knob to select a drying cycle ( - ) in accordance 12 13
with the type of fabric. The desired drying level or time may also be set
using the DRYING button .
Divide the laundry according to:
Type of fabric (cotton, mixed bres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash new
coloured garments separately). Delicates (small garments such as nylon
stockings and items with hooks such as bras: insert them in a fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washer-dryer and the
drum. Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus detergent
in your laundry and it saves money by avoiding waste of surplus detergent.
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the “Wash Cycle
Table table to save water and energy.
Noise and remaining moisture content
They are inuenced by the spinning speed: the higher the spinning speed
in the spinning phase, the higher the noise and the lower the remaining
moisture content.
Before performing cleaning and maintenance, switch the washer-dryer o
and disconnect it from the mains power. Do not use ammable liquids to
clean the washer-dryer. Clean and maintain your washer-dryer periodically
(at least 4 times per year).
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washer-dryer and help to prevent leaks.
Unplug the washer-dryer when cleaning it and during all maintenance
Clean the washer-dryer
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
The washer-dryer has a Auto Clean” programme for its internal parts that
must be run with no load in the drum.
For maximum performance you may want to use either the detergent (i.e.
a quantity 10% the quantity specied for lightly-soiled garments) or
special additives to clean the washer-dryer. We recommend running a
cleaning programme every 40 wash cycles.
To start the programme press buttons and simultaneously for
5 seconds.
The programme will start automatically and will last approximately 70
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours
from forming.
Clean the pump
The washer-dryer is tted with a auto-cleaning pump that does not
require any maintenance. Small items (such as coins or buttons) may
sometimes fall into the protective pre-chamber situated at the base of the
! Make sure the wash cycle has ended and unplug the appliance.
To access the pre-chamber:
1. remove the cover panel on the front of the machine by rst pressing it
in the centre then pushing downwards on both sides to extract it;
2. loosen the drainage pump cover by turning it anti-clockwise: it is
normal for some water to leak out;
3. clean the inside thoroughly;
4. screw the cover back on;
5. put the panel back in place, making sure the hooks slot in place before
pushing the panel onto the appliance.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
Before every spin cycle, to avoid excessive vibrations before every
spin and to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the washing
rotation speed. If, after several attempts, the load is not balanced
correctly, the machine spins at a reduced spin speed. If the load is
excessively unbalanced, the washer-dryer performs the distribution
process instead of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are mixed in the load.
Contact our Technical Assistance Service to check whether the following
accessories are available for this washer-dryer model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of
your washer-dryer to save space and facilitate loading and unloading of
the tumble dryer.
Do not lift the washer-dryer by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
“Health & Safety and Installation Guides”.

Product specificaties

Merk: Indesit
Categorie: Wasdroger
Model: EWDE 861483 S UK
Apparaatplaatsing: Vrijstaand
Soort bediening: Buttons, Rotary
Kleur van het product: Zilver
Deurscharnieren: Links
Ingebouwd display: Ja
Gewicht: 65000 g
Breedte: 595 mm
Diepte: 535 mm
Hoogte: 850 mm
Netbelasting: 1850 W
Type stekker: Type G
Aantal programma's: 16
Type lader: Voorbelading
Materiaal trommel: Roestvrijstaal
Snoerlengte: 1.2 m
Trommelinhoud: 58 l
Uitgestelde start timer: Ja
Startvertraging: 24 uur
Resterende tijd indicatie: Nee
Kinderslot: Nee
Anti-kreuk functie: Nee
Gewicht verpakking: 66450 g
Breedte verpakking: 645 mm
Diepte verpakking: 590 mm
Hoogte verpakking: 890 mm
Centrifuge-droger klasse: B
Geluidsniveau (wassen): 78 dB
Aanpasbare centrifugesnelheid: Ja
Maximale centrifugesnelheid: 1400 RPM
Stroom: 13 A
Beeldscherm: LED
Geluidsemissieklasse: C
Droogcapciteit: 6 kg
Waterverbruik wassen & drogen: 65 l
Water verbruik wassen: 48 l
Duur cyclus (snelwas programma): 45 min
Verstelbare voeten: Ja
Land van herkomst: Italië
Code UK-handelstarief: 84501111
Half-geladen: Nee
Instelbare temperatuur: Ja
Energie-efficiëntieklasse (wassen): C
Energie-efficiëntieklasse (wassen en drogen): D
Energieverbruik per 100 cycli (wassen): 63 kWu
Energieverbruik per 100 cycli (wassen en drogen): 307 kWu
Watertoevoer: Koud
Verlichting in trommel: Nee
Easy Iron-functie: Ja
Duur wascyclus: 210 min
Export Control Classification Number (ECCN): 84501111
Nominale capaciteit (wassen): 8 kg
AC-ingangsspanning: 220-240 V
AC-ingangsfrequentie: 50 Hz
Type beeldscherm: LED

Heb je hulp nodig?

Als je hulp nodig hebt met Indesit EWDE 861483 S UK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Handleiding Wasdroger Indesit

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger