GE Profile PFA18REVW Handleiding

GE Wasdroger Profile PFA18REVW

Bekijk gratis de handleiding van GE Profile PFA18REVW (20 pagina’s), behorend tot de categorie Wasdroger. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over GE Profile PFA18REVW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/20
If you have any questions, call GE Appliances at 833-4BODEWELL (833-426-3393) or
visit our Website at: GEAppliances.com
Reversing the Door
PFA18REVW
Installation
Instructions
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT Save these
IMPORTANT Observe all
governing codes and ordinances.
Note to Installer Be sure to leave these
instructions with the Consumer.
Note to Consumer Keep these
instructions for future reference.
Skill level Installation of this appliance requires
basic mechanical and electrical skills.
Completion time 1-3 hours
Proper installation is the responsibility of the
installer.
Product failure due to improper installation is not
covered under the Warranty.
Unplug the appliance or turn off the circuit breaker
before starting the reversing the door procedure.
NOTE: Pressing the (Power) pad DOES NOT
disconnect power.
Failure to do so may result in fire or electrical shock.
WARNING
Phillips-head screwdriver
TOOLS YOU WILL NEED
Cap Cover - Left (5)
PARTS SUPPLIED
Top Bracket - Left
Wear gloves and arm guards.
The door is very heavy. Be careful not to drop it.
When you work on a ladder, be cafeful not to fall.
Failure to follow these instructions can result in
lacerations or injury.
CAUTION
Gloves and arm guards
MFL05755502
49-3000416 Rev 0 01-25
2
Installation Instructions
1. Remove six Phillips-head screws.
2. Lift the top cover and remove it.
3. Remove the top hinge cover.
4. Remove six Phillips-head screws securing the top
front cover.
NOTE: Four of the top front cover Phillips-head screws
are beneath the top frame.
It is possible to reverse the direction of the door swing.
Reversing the direction of the door should be done by
the installer at the time of installation.
3
Installation Instructions
8. Remove lower front access cover and lay it down
in front of the appliance.
9. Disconnect wiring connectors (red and white
connectors) and set the cover aside.
NOTE: Top right arrow is pointing out location of the
user interface harness connector.
5. Slide the top front cover out to remove.
6. Remove drain water and supply water tanks.
7. Remove five Phillips-head screws from the lower
front access cover.
Drain Water
Tank
Supply Water
Tank


Product specificaties

Merk: GE
Categorie: Wasdroger
Model: Profile PFA18REVW

Heb je hulp nodig?

Als je hulp nodig hebt met GE Profile PFA18REVW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden