Honeywell T8611 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell T8611 (24 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 124 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Your new Honeywell Chronotherm III
Fuel Saver Thermostat is a precision
instrument that’s quality-built to give
you many years of satisfactory
service. Each day of the week can be
programmed independently so that,
regardless of your schedule, you’ll
save fuel while automatically
maintaining the standard of comfort
you require.
This User’s Guide will show you how
to get the most benefit from your new
thermostat.
Programming Your Thermostat
...............
l-1 8
Enter the day and time
.........................
1
Set
the program times and
temperatures for
one day
...................
2
Copy
the program to the desired days
.......
11
Set
the program times and temperatures
for the
remaining
days
.....................
14
Set the system and fan switches
on the subbase
.............................
17
Operating Your Thermostat
.................
19-26
Temporarily changing the program
.........
.19
Permanently changing the program
.........
.21
Operating the thermostat manually
..........
.23
Canceling program settings
.................
.24
Checking the program times and
temperatures
..............................
,215
Checking the current temperature setting
...
.26
Maintaining Your Thermostat
...............
27-30
Removing the thermostat
....................
.27
Replacing the thermostat
....................
.28
Replacing the batteries
.......................29
Power outages
..............................
.30
Glossary
.....................................
31-32
Your Daily Program
.........................
33-34
Model Identification Guide
..................
35-36
Troubleshooting Guide
......................
37-38
Quick Reference to the Keys
................
39-40
Index
.........................................
41-42
Warranty
........................................
.43
I
I
STEP 1
ENTER THE DAY AND TIME
You
can program this thermostai
either on the wall or in your
hand. SEE PAGE 27 TO FIND
OUT HOW TO REMOVE THE
THERMOSTAT FROM THE
WALL
Always press the keys with
your
fingertip or similar blunt tool.
Sharp instruments like a pen or
pencil point can damage the
keyboard.
NOTE: Check the glossary, page
31, for definitions of unfamiliar
words.
STEP 2
SET THE PROGRAM TIMES
AND TEMPERATURES FOR
ONE DAY
Before You Begin.
.
.
The schedule form on page 33
provides an opportunity to plan
your daily program.
Now.
.
.
Choose a day to program first.
We’ll use Monday in the exam-
ples, but you can start with any
day. Start by programming the
MORNING time and tempera-
tures. The thermostat requires a
MORNING program every day.
You can set additional programs
as desired.
SET
0
Press and release. The display
PRESENT
DAY/TIME
shows 1:00 PM Mon.
Press and hold until the current
day appears in the display.
TIME
ml
Press and hold until the current
A,
time appears in the display. Be
El
sure AM or PM appears as
:’
desired.
You have set the current day and
time. Go on to Step 2.
pii-]
[-7$X-=]
1
Press and release. Note that the
-
‘..
display shows MORNING and
the preprogrammed time and
temperature.
If the display reads COOL, press
and release to switch to HEAT.
Press and hold until MONDAY
(or the desired day) appears in
the display.
Press and hold until the
display
shows the time you want the
temperature at the comfort
I
setting.
00
-
ml
Press and hold until the display
shows the desired heating
temperature.
If the display flashes while you
are holding down TEMPERA-
TURE WARMER or COOLER,
you have reached the setting
limit. If your thermostat can
switch automatically between
heating and cooling, the heating
temperature must be at least 3
degrees below the air condition-
ing temperature. For example, if
the cooling setting is
75’
F, the
maximum heating setting is 72”
F. To set a higher heating
temperature, you must first raise
the cooling setting.
Program the MIDDAY time and
heating temperature if desired.
NOTE: You can cancel any
period showing on the display
except MORNING by pushing
the the CANCEL
PERiOD
key.
To move to the next period
while programming, simply
ml
press the PERIOD key again.
Press and release. The display
shows MIDDAY, but no time or
temperature.
Press and hold until the display
shows the time you want room
temperature to start drifting
toward the energy saving setting.
Press and hold until the display
shows the desired temperature.
4


Product specificaties

Merk: Honeywell
Categorie: Thermostaat
Model: T8611

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell T8611 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Honeywell

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat