Forte Lighting 5743-02 Handleiding
Pagina's 1 Verlichting
Bekijk de handleiding van Forte Lighting 5743-02 gratis online of download de PDF. 25 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
5743-01 5743-02 5743-03 5743-04
crossbar.
The crossbar (B) has several pairs of threaded holes. Find the pair of holes that matches the spacings on the junction box and your
fixture’s backplate. Two mounting screws (A) should be attached to the crossbar (B). Pull the house wires through the center of the crossbar (B).
Secure the crossbar (B) to the junction box by securely tightening the mounting screws (A).
Place the fixture’s backplate (D) against the cross bar (B), secure the backplate by tightening screws (G) from the top of the backplate (D). Twist
until the backplate of the fixture is snugly against the wall.
Secure shade (F) onto the socket (E) by screwingsocket ring (H) tightly. Install
light bulb(s) (not included) in accordance with the fixture’s specifications. Do not exceed the recommended maximum wattage.
These instructions are provided for your safety. It is very important to read them carefully and completely before beginning
installation of the lighting fixture.We strongly suggest that all direct-wired fixture be installed by a qualified and licensed
electrician.
W A R N I N G! S H U T POWER OFF AT FUSE OR CIRCUIT BREAKER
BEFORE INSTALLATION
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DIS JONCTEUR.
Attach the fixture’s wires to the power supply wires from the junction box. Connect the black wire with the black( or smooth); the white wrie with
the white (or ribbed); the ground wire with the ground (green or copper). Twist the end of the wire pairs together and twist on a wire connector for
each color pair. Make sure all twists are in the same direction. If there is no ground wire(green or copper) from the junction box, locate a ground
screw (C) on the crossbar (B) and wrap the fixture’s the ground wire around the green ground screw (C). Use a screwdriver to tighten the ground
screw (C) onto the crossbar. Tuck all wires neatly into the junction box.
CLEANING TIPS
Treat the fixture gently! Regular cleaning will reduce the need of deep cleaning. For regular cleaning, turn off the lighting and wipe down
the fixture with a clean lint-free cotton or microfiber cloth. Never spray cleaner directly onto the fixture.
B
A
C
SMOOTH
D
I
H
E
F
G
Product specificaties
| Merk: | Forte Lighting |
| Categorie: | Verlichting |
| Model: | 5743-02 |
Heb je hulp nodig?
Als je hulp nodig hebt met Forte Lighting 5743-02 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verlichting Forte Lighting
Forte Lighting 7117-02 Handleiding Forte Lighting 5743-01 Handleiding Forte Lighting 2759-03 Handleiding Forte Lighting 7120-01 Handleiding Forte Lighting 2743-01 Handleiding Forte Lighting 5620-01 Handleiding Forte Lighting 5745-02 Handleiding Forte Lighting 2672-01 Handleiding
Alle Forte Lighting Verlichting handleidingen
Populair in Verlichting
Forte Lighting 2679-01 Handleiding Forte Lighting 5743-04 Handleiding Forte Lighting 5535-01 Handleiding
Handleiding Verlichting
Nieuwste handleidingen voor Verlichting
Beghelli Saving Slim 75465 Handleiding Beghelli Saving Slim 75464 Handleiding Beghelli Stagna Easy CCT 75462 Handleiding Beghelli 75468 Handleiding Beghelli Saving Slim 75467 Handleiding Beghelli 75458 Handleiding Beghelli Stagna Flat 75457 Handleiding Beghelli Saving Slim 75466 Handleiding Beghelli Stagna Easy CCT 75460 Handleiding Beghelli Saving Slim 75468 Handleiding